Code:
/*
* enigma_scan.cpp
*
* Copyright (C) 2002 Felix Domke <[email protected]>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* $Id: enigma_scan.cpp,v 1.27 2009/02/07 10:06:31 dbluelle Exp $
*/
#include <enigma_scan.h>
#include <satconfig.h>
#include <rotorconfig.h>
#include <scan.h>
#include <satfind.h>
#include <tpeditwindow.h>
#include <lib/base/i18n.h>
#include <lib/dvb/edvb.h>
#include <lib/dvb/frontend.h>
#include <lib/gui/ewindow.h>
#include <lib/gui/eskin.h>
#include <lib/gui/elabel.h>
#include <lib/gui/emessage.h>
#include <lib/system/info.h>
eZapScan::eZapScan()
:eSetupWindow(_("Service Searching"),
eSystemInfo::getInstance()->getFEType()
== eSystemInfo::feSatellite ? 9 : 7, 400)
{
init_eZapScan();
}
void eZapScan::init_eZapScan()
{
int entry=0;
move(ePoint(160, 130));
if ( eSystemInfo::getInstance()->getFEType() == eSystemInfo::feSatellite ) // only when a sat box is avail we shows a satellite config
{
CONNECT((new eListBoxEntryMenu(&list, _("Satellite Configuration"), eString().sprintf("(%d) %s", ++entry, _("open satellite config"))))->selected, eZapScan::sel_satconfig);
CONNECT((new eListBoxEntryMenu(&list, _("Satfind"), eString().sprintf("(%d) %s", ++entry, _("open the satfinder"))))->selected, eZapScan::sel_satfind);
CONNECT((new eListBoxEntryMenu(&list, _("Motor Setup"), eString().sprintf("(%d) %s", ++entry, _("open Motor Setup"))))->selected, eZapScan::sel_rotorConfig);
CONNECT((new eListBoxEntryMenu(&list, _("Transponder Edit"), eString().sprintf("(%d) %s", ++entry, _("for automatic scan"))))->selected, eZapScan::sel_transponderEdit);
}
else if ( eSystemInfo::getInstance()->getFEType() == eSystemInfo::feTerrestrial )
{
CONNECT((new eListBoxEntryMenu(&list, _("Signalfind"), eString().sprintf("(%d) %s", ++entry, _("open the signalfinder"))))->selected, eZapScan::sel_satfind);
(new eListBoxEntryCheck(&list, _("Disable 5V"), "/elitedvb/DVB/config/disable_5V", _("disable 5V for passive terrerstrial antennas")))
->selected.connect( slot(*eFrontend::getInstance(), &eFrontend::setTerrestrialAntennaVoltage) );
}
if ( eSystemInfo::getInstance()->getFEType() != eSystemInfo::feCable )
new eListBoxEntryMenuSeparator(&list, eSkin::getActive()->queryImage("listbox.separator"), 0, true );
CONNECT((new eListBoxEntryMenu(&list, _("Automatic Transponder Scan"), eString().sprintf("(%d) %s", ++entry, _("open automatic transponder scan"))))->selected, eZapScan::sel_autoScan);
if ( eSystemInfo::getInstance()->getFEType() == eSystemInfo::feSatellite ) // only when a sat box is avail we shows a satellite config
CONNECT((new eListBoxEntryMenu(&list, _("Automatic Multisat Scan"), eString().sprintf("(%d) %s", ++entry, _("open automatic multisat transponder scan"))))->selected, eZapScan::sel_multiScan);
CONNECT((new eListBoxEntryMenu(&list, _("Manual Transponder Scan"), eString().sprintf("(%d) %s", ++entry, _("open manual transponder scan"))))->selected, eZapScan::sel_manualScan);
}
void eZapScan::sel_satfind()
{
hide();
eSatfind s(eFrontend::getInstance());
s.show();
s.exec();
s.hide();
show();
}
void eZapScan::sel_autoScan()
{
#ifndef DISABLE_LCD
TransponderScan setup(LCDTitle, LCDElement, TransponderScan::stateAutomatic);
#else
TransponderScan setup(0,0,TransponderScan::stateAutomatic);
#endif
hide();
setup.exec();
show();
}
void eZapScan::sel_multiScan()
{
#ifndef DISABLE_LCD
TransponderScan setup(LCDTitle, LCDElement, TransponderScan::stateMulti);
#else
TransponderScan setup(0,0,TransponderScan::stateMulti);
#endif
hide();
setup.exec();
show();
}
void eZapScan::sel_manualScan()
{
#ifndef DISABLE_LCD
TransponderScan setup(LCDTitle, LCDElement, TransponderScan::stateManual);
#else
TransponderScan setup(0,0,TransponderScan::stateManual);
#endif
hide();
setup.exec();
show();
}
void eZapScan::sel_satconfig()
{
hide();
eSatelliteConfigurationManager satconfig;
#ifndef DISABLE_LCD
satconfig.setLCD(LCDTitle, LCDElement);
#endif
satconfig.show();
satconfig.exec();
satconfig.hide();
show();
}
eLNB* eZapScan::getRotorLNB(int silent)
{
int c=0;
std::list<eLNB>::iterator RotorLnb = eTransponderList::getInstance()->getLNBs().end();
std::list<eLNB>::iterator it( eTransponderList::getInstance()->getLNBs().begin());
for (; it != eTransponderList::getInstance()->getLNBs().end(); it++ )
{
if ( it->getDiSEqC().DiSEqCMode == eDiSEqC::V1_2 )
{
if (!c++)
RotorLnb=it;
}
}
if ( c > 1 ) // we have more than one LNBs with DiSEqC 1.2
{
eMessageBox::ShowBox(_("DiSEqC 1.2 is enabled on more than one LNB, please select the LNB the motor is connected to"), _("Info"), eMessageBox::iconWarning|eMessageBox::btOK );
eLNBSelector sel;
sel.show();
int ret = sel.exec();
sel.hide();
return (eLNB*) ret;
}
else if ( !c )
{
if (!silent)
{
eMessageBox::ShowBox( _("Found no LNB with DiSEqC 1.2 enabled,\nplease goto Satellite Config first, and enable DiSEqC 1.2"), _("Warning"), eMessageBox::iconWarning|eMessageBox::btOK );
}
return 0;
}
else // only one lnb with DiSEqC 1.2 is found.. this is correct :)
return &(*RotorLnb);
}
void eZapScan::sel_transponderEdit()
{
hide();
eTransponderEditWindow wnd;
#ifndef DISABLE_LCD
wnd.setLCD(LCDTitle, LCDElement);
#endif
wnd.show();
wnd.exec();
wnd.hide();
show();
}
void eZapScan::sel_rotorConfig()
{
hide();
eLNB* lnb = getRotorLNB(0);
if (lnb)
{
RotorConfig c(lnb);
#ifndef DISABLE_LCD
c.setLCD( LCDTitle, LCDElement );
#endif
c.show();
c.exec();
c.hide();
}
show();
}
eLNBSelector::eLNBSelector()
:eListBoxWindow<eListBoxEntryText>(_("Select LNB"), 5, 300, true)
{
init_eLNBSelector();
}
void eLNBSelector::init_eLNBSelector()
{
move(ePoint(140, 156));
int cnt=0;
for ( std::list<eLNB>::iterator it( eTransponderList::getInstance()->getLNBs().begin()); it != eTransponderList::getInstance()->getLNBs().end(); it++, cnt++ )
{
if ( it->getDiSEqC().DiSEqCMode == eDiSEqC::V1_2 )
new eListBoxEntryText( &list, eString().sprintf("LNB %d", cnt), (void*)&(*it), 0, eString().sprintf(_("use LNB %d for Motor"), cnt ).c_str());
}
CONNECT( list.selected, eLNBSelector::selected );
}
void eLNBSelector::selected( eListBoxEntryText *e )
{
if ( e && e->getKey() )
close((int)e->getKey());
else
close(0);
}
)
Originally Posted by pedritto
sur ton PC.
