AZ_Box

[Tzimakos]

Δημήτρη, το βράδυ θα τα πούμε σίγουρα, περιμένω πως και πως...
Κατά τα άλλα αυτό που με καίει είναι να μοιράσω κάρτα με άλλο δέκτη (μέσω ethernet) και αυτό θα γίνει μόνο με το newcs απ'ότι μου είπανε από την Tronix και ο φίλος Nikman βεβαίως βεβαίως...
Παλεύω τόσο καιρό να το πετύχω αλλά αν δεν ξέρεις κάτι αυτά παθαίνεις...

file tin karta mporeis na tin moiraseis me cccam kai ena eksoteriko smargo . ego etsi to kano . 30 europoulakia kanei to smargo , oxi pos einai oti pio stathero yparxei alla tin doulia sou tin kaneis nomizo pio eukola

Συμφωνω 100% στην προταση για το smartgo.
Το εχω δοκιμασει και παιζει πολυ σταθερα.
Φιλικα Τζιμακος

[zarkgeo]

Ok, το smargo αύριο θα το έχω.
Από κει και πέρα όμως, θέλω βοήθεια...

[zarkgeo]

Υπόψην ότι ο άλλος δέκτης είναι ο mvision s-5 που υποστηρίζει: Home Sharing / Private Sharing / Newcamd / Radegast.

[nickman9271]

MANUAL
Mbox 04 + newcs + CCcam 2.1.1 + multicast
AZBOX HD




Well guys here I bring this combination of EMUS linked with its corresponding manual for AZBOX up and running in HD.


Let's see how this combination:


Newcs - Read the LOCAL (if you have it) and is shared by both Mbox 04 and CCcam 2.1.1.

Mbox 04 - This is the MBox version 0.4 (build 0023r3) Multi ECMs and linked with CCcam 2.1.1, which passed the cards to Mbox cccam, but that if adding a distance.

CCcam 2.1.1. - This is version 2.1.1 cccam. Makes Server / Client and linked with multicast (multicast client mode CCcam) (adding a distance) and get the Mbox cards (adding a distance).

multicast - This is the version 1.61C-A15a, the EMU is that used for viewing in the AZBOX HD CCcam client does (adding a distance), but client can do other external servers (Max 16).


INSTALLATION:


For the installation we will use any FTP program like DCC or MAZ.


In the download are two folders and a file, we will see the installation paths and attributes:


Folder "lib" - This is the folder that contains the Ccama and all its configuration files (CCcam.cfg, CCcam.prio, etc ... ... ..) less "dvbapiCAS.

You need only configure the CCcam.cfg with your data and lines, other data are already configured.

PATH - This folder must get her into the path "/ plugins".

attribute - must be given attributes 755 to the folder and all files inside this folder.


Folder"OpenXCAS" - This is the folder that contains almost all the EMUS (Newcs, MBox 0.4, multicast) minus CCcam even if it takes the "dvbapiCAS" of cccam.


You have to configure the Newcs, MBox 0.4, multicast with your data and lines.

PATH - This folder must get her into the path "/ plugins".

attribute - must be given attributes 755 to the folder "OpenXCAS" and the files inside this folder:

module.seq --------- 755
----- openxcas.conf-755


Inside the folder "OpenXCAS" are folders and now we will also detail the attributes of these folders and files that are inside these folders:



Folder "dvbapiCAS" - must be given attributes 755 to the folder "dvbapiCAS" yya these files inside this folder:

dvbapi.sh--------- 755
_ # # 755 ------ dvbapi_module


Folder "MboxCAS" - must be given attributes 755 to the folder "MboxCAS" and these files that are inside this folder:

mbox.sh--------- 755
mbox_module1 ------ 755
----- openxcas.conf-755



Folder "Multicar" - must be given attributes 755 to the folder "Multicar" and 755 to all files inside this folder.



Folder "NewCS" - must be given attributes 755 to the folder "NewCS" and these files that are inside this folder:

newcs --------- 755



File "S10UserDefinedShell" - This is the file containing the startup script of EMUS, makes some of them started in the background and so only make Reshare, with this script you're all set on the way to start the emus and do not touch anything in the file "module.seq" that must be left as this only brings Newcs activated and conf.

PATH - This file needs to be thrown in the path "/ DISK2/etc/stard.d", overwriting the one that comes in the receiver.

attribute - In file "S10UserDefinedShell" attributes must be given 755.


NOTE - obviously you must configure the EMUS with your configuration files (CCcam.cfg, CCcam.prio, mbox.cfg, cwshare.cfg, etc ... .... .) with your configuration (host, port, user, pass, lines, etc ... ....) and Newcs with the settings in your local (Box *** N3 R180 and RSA and RSA or Freeview Box K*Y Futbolera or which is ... ... ..)

Note2 - In the discharge and within files (CCcam.cfg of cccam and multicast, cwshare.cfg Mbox), you have practical examples to make all the lines that link the EMUS, which will guide you to make links with your data.


MANUAL MADE BY MAGNOMAN , with the invaluable and indispensable help of RUSOALICIA (ERES UN CRACK) AND IDEAS FORUM azboxhd.es DRAWN IN THE TIME THAT LEADS INSTALLED IN MY PREMIUM, Behaves VERY STABLE, I HOPE YOU KINDLY HELP TO MANY


GREETINGS FROM SEVILLA

Mil gracias a magnoman

[bluechri]

Εγώ θα πρότεινα να δοκιμάσεις το Sbox στον azbox το οποίο δουλεύει σωστά σαν newcs server και έτσι θα συνδεθεί και ο άλλος σου δέκτης πάνω αλλά και ο ίδιος ο azbox που θα το τρέχει θα συνδέεται είτε με το multicas σαν client που είναι και το ποιο γρήγορο είτε με cccam.

[nickman9271]

gia xrisi me to smargo to sbox , giati kata ta legomena den diabazei to esoteriko reader .
an exeis how gia to sbox giati den anezeis . den to katexo katholou to athlima .

[zarkgeo]

Παιδιά, το μόνο που ξέρω είναι ότι το smargo το προμηθεύτηκα.
Εντάξει εσείς τα κατέχετε,εγώ όμως που ούτε από sbox ξέρω, ούτε το newcs, τί κάνω?
Σας παρακαλώ, βήμα βήμα για να βγάλω άκρη.

[nickman9271]

gia to newcs diabase to parapano . pou einai ola paketo me to mbx kai to cccam . egkatestise ta opos leei .
kai sto newcs.xml prostheteis to smargo+ . otan ftaseis ekei tha sou po to pos

[zarkgeo]

Τα έκανα όπως λέει.
Έδωσα δικαιώματα 755 σε όλα τα αρχεία που αναφέρει πιο πάνω.
(δεξί κλικ και βάζω το 755)
Από κει και μετά?

[zarkgeo]

Φίλε Νikman, ακόμα περιμένω με το smargo στα χέρια.
Αν μπορείς,βοήθα για να ξεκολήσω...


miso re file