DM7025 - CCcam - SMARGO - G*MM* PROBLEMS

[infloop]

I seem to have a lot of problems no matter what I try with this setup. Has anyone managed to successfully use the above combination? It seems like most of the times the card is not working.

The 7025 image is a Gemini2 v4.50

Here is a log of CCcam -d -t:

21:08:39.482 CCcam: ======================================================================
21:08:39.486 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
21:08:39.487 CCcam: ======================================================================
21:08:39.489 CCcam: online using nodeId 01234
21:08:39.513 CCcam: dvb api3 detected
21:08:39.515 CCcam: DM7025 detected
21:08:39.516 CCcam: create 8 cam device(s)
21:08:39.895 CCcam: card detect fail
21:08:40.168 CCcam: added 0 keys from /var/keys/SoftCam.Key
21:08:40.169 CCcam: added 0 keys from /var/keys/AutoRoll.Key
21:08:40.170 CCcam: added 0 keys from /var/keys/constant.cw
21:08:40.171 CCcam: parsed 0 entries from /var/etc/CCcam.prio
21:08:40.171 CCcam: added 0 provider names from /var/etc/CCcam.providers
21:08:40.172 CCcam: added 0 channel names from /var/etc/CCcam.channelinfo
21:08:40.173 CCcam: server started on port 12000
21:08:40.787 CCcam: card detect fail
21:08:42.827 CCcam: irdeto card found
21:08:43.499 CCcam: card added to broker with caid 604
21:08:45.213 CCcam: login from 1.2.3.4
21:08:45.269 CCcam: user USERNAME login attempt from 1.2.3.4
21:08:45.301 CCcam: client USERNAME@56789, running CCcam 2.1.3
21:09:07.820 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:07.894 CCcam: local ecm <- card /dev/usb/tts/0 ok
21:09:07.896 CCcam: client USERNAME ecm request for handler 0x9d 0x604(0x0) sid 0x13e ok: 1 (took 0.2284 seconds)
21:09:12.211 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:13.211 CCcam: local ecm <- card /dev/usb/tts/0 error
21:09:13.213 CCcam: client USERNAME ecm request for handler 0x9d 0x604(0x0) sid 0x13e ok: 0 (took 1.0018 seconds)
21:09:14.272 CCcam: client USERNAME ecm request for handler 0x9d 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:09:14.392 CCcam: client USERNAME ecm request for handler 0x9d 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:09:14.510 CCcam: client USERNAME ecm request for handler 0x9d 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:09:14.637 CCcam: irdeto card found
21:09:15.307 CCcam: card added to broker with caid 604
21:09:23.472 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:23.545 CCcam: local ecm <- card /dev/usb/tts/0 ok
21:09:23.547 CCcam: client USERNAME ecm request for handler 0xa3 0x604(0x0) sid 0x13e ok: 1 (took 0.0751 seconds)
21:09:34.195 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:35.266 CCcam: local ecm <- card /dev/usb/tts/0 error
21:09:35.267 CCcam: client USERNAME ecm request for handler 0xa3 0x604(0x0) sid 0x13e ok: 0 (took 1.0725 seconds)
21:09:36.410 CCcam: irdeto card found
21:09:37.082 CCcam: card added to broker with caid 604
21:09:37.774 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:38.856 CCcam: local ecm <- card /dev/usb/tts/0 error
21:09:38.858 CCcam: client USERNAME ecm request for handler 0xa6 0x604(0x0) sid 0x13e ok: 0 (took 1.0934 seconds)
21:09:38.977 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:09:40.048 CCcam: local ecm <- card /dev/usb/tts/0 error
21:09:40.050 CCcam: client USERNAME ecm request for handler 0xa6 0x604(0x0) sid 0x13e ok: 0 (took 1.0733 seconds)
21:09:40.166 CCcam: client USERNAME ecm request for handler 0xa6 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:09:40.287 CCcam: client USERNAME ecm request for handler 0xa6 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:09:41.091 CCcam: irdeto card found
21:09:41.761 CCcam: card added to broker with caid 604
21:09:46.080 CCcam: client USERNAME ecm request for handler 0xa6 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:10:00.409 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:01.410 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:01.412 CCcam: client USERNAME ecm request for handler 0xa8 0x604(0x0) sid 0x13e ok: 0 (took 1.0024 seconds)
21:10:01.530 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:02.601 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:02.604 CCcam: client USERNAME ecm request for handler 0xa8 0x604(0x0) sid 0x13e ok: 0 (took 1.0735 seconds)
21:10:02.749 CCcam: client USERNAME ecm request for handler 0xa8 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:10:02.868 CCcam: client USERNAME ecm request for handler 0xa8 0x604(0x0) sid 0x13e ok: 0 (took 0.0008 seconds)
21:10:03.641 CCcam: irdeto card found
21:10:04.311 CCcam: card added to broker with caid 604
21:10:10.839 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:10.912 CCcam: local ecm <- card /dev/usb/tts/0 ok
21:10:10.914 CCcam: client USERNAME ecm request for handler 0xae 0x604(0x0) sid 0x13e ok: 1 (took 0.0755 seconds)
21:10:18.591 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:19.662 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:19.664 CCcam: client USERNAME ecm request for handler 0xae 0x604(0x0) sid 0x13e ok: 0 (took 1.0730 seconds)
21:10:21.403 CCcam: irdeto card found
21:10:22.073 CCcam: card added to broker with caid 604
21:10:23.009 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:24.081 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:24.083 CCcam: client USERNAME ecm request for handler 0xb1 0x604(0x0) sid 0x13e ok: 0 (took 1.0734 seconds)
21:10:24.202 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:25.273 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:25.276 CCcam: client USERNAME ecm request for handler 0xb1 0x604(0x0) sid 0x13e ok: 0 (took 1.0735 seconds)
21:10:26.313 CCcam: irdeto card found
21:10:26.983 CCcam: card added to broker with caid 604
21:10:41.606 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:42.678 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:42.680 CCcam: client USERNAME ecm request for handler 0xb2 0x604(0x0) sid 0x13e ok: 0 (took 1.0739 seconds)
21:10:42.800 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:43.800 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:43.803 CCcam: client USERNAME ecm request for handler 0xb2 0x604(0x0) sid 0x13e ok: 0 (took 1.0044 seconds)
21:10:43.944 CCcam: client USERNAME ecm request for handler 0xb2 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:10:44.064 CCcam: client USERNAME ecm request for handler 0xb2 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:10:44.844 CCcam: irdeto card found
21:10:45.515 CCcam: card added to broker with caid 604
21:10:53.550 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:54.621 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:54.623 CCcam: client USERNAME ecm request for handler 0xb6 0x604(0x0) sid 0x13e ok: 0 (took 1.0732 seconds)
21:10:54.740 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:10:55.812 CCcam: local ecm <- card /dev/usb/tts/0 error
21:10:55.815 CCcam: client USERNAME ecm request for handler 0xb6 0x604(0x0) sid 0x13e ok: 0 (took 1.0747 seconds)
21:10:56.854 CCcam: irdeto card found
21:10:57.525 CCcam: card added to broker with caid 604
21:11:09.192 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:11:10.263 CCcam: local ecm <- card /dev/usb/tts/0 error
21:11:10.265 CCcam: client USERNAME ecm request for handler 0xb7 0x604(0x0) sid 0x13e ok: 0 (took 1.0729 seconds)
21:11:10.382 CCcam: local ecm -> card /dev/usb/tts/0 0x604(0x000) sid 0x13e
21:11:11.454 CCcam: local ecm <- card /dev/usb/tts/0 error
21:11:11.456 CCcam: client USERNAME ecm request for handler 0xb7 0x604(0x0) sid 0x13e ok: 0 (took 1.0736 seconds)
21:11:11.575 CCcam: client USERNAME ecm request for handler 0xb7 0x604(0x0) sid 0x13e ok: 0 (took 0.0015 seconds)
21:11:11.693 CCcam: client USERNAME ecm request for handler 0xb7 0x604(0x0) sid 0x13e ok: 0 (took 0.0007 seconds)
21:11:12.501 CCcam: irdeto card found
21:11:13.172 CCcam: card added to broker with caid 604

And here is my current CCcam.cfg

SERIAL READER : /dev/usb/tts/0 smartreader+
CAMKEY : /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA : /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/usb/tts/0
B : /dev/usb/tts/0 06

SMARGO is configured with:
Automatic
Dreambox
0
0

After about 40min, the card completely fails with the following message:

21:50:03.597 CCcam: card detect fail

[nickman9271]

sorry cccam 2.1.3 and g@mm# won't work ... roll back to a previous cccam...

[infloop]

sorry cccam 2.1.3 and g@mm# won't work ... roll back to a previous cccam...

Any particular version that CCcam works verified without problems?

[infloop]

I have just tried 2.1.2 and it still doesn't work!

[passata]

My N*va g*mmacard works fine in a Smargo+ reader with this configuration. I'm using CCcam 2.1.3


CCcam.cfg:

SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6860000
CAMKEY: /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS : /dev/usb/tts/0
SERIAL READER : /dev/usb/tts/1 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1 6860000
CAMKEY: /dev/usb/tts/1 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS : /dev/usb/tts/1




Smargo+ configuration:

Mode = fixed
Frequency = 6.86
Kernel = Dreambox
T-mode = T=1
EGT = 0

[infloop]

Thank you for the reply but I must be doing something wrong here. It still does not work.

02:40:38.945 CCcam: chid 000F
02:40:38.945 CCcam: chid 0014
02:40:38.946 CCcam: chid 0016
02:40:38.946 CCcam: chid 005C
02:40:38.946 CCcam: chid 008A
02:40:38.946 CCcam: chid 00A9
02:40:38.947 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x5fd Unknown (took 0.0017 seconds)
02:40:39.647 CCcam: chid 005C
02:40:39.648 CCcam: chid 008A
02:40:39.648 CCcam: chid 00A9
02:40:39.648 CCcam: chid 000F
02:40:39.648 CCcam: chid 0014
02:40:39.648 CCcam: chid 0016
02:40:39.649 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x5fd Unknown (took 0.0016 seconds)
02:40:40.333 CCcam: chid 000F
02:40:40.334 CCcam: chid 0014
02:40:40.334 CCcam: chid 0016
02:40:40.334 CCcam: chid 005C
02:40:40.334 CCcam: chid 008A
02:40:40.334 CCcam: chid 00A9
02:40:40.335 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x5fd Unknown (took 0.0016 seconds)

Which gam file are you using?

[passata]

I'm using Nova_Gr_Cy_10_12_2009.gam file.
Auto updates in 15 seconds on FOXlife (12130 H 27500 3/4)

[infloop]

From what I read in other forums, this is a known issue with some g*mm* cards and smargo and its a combination that I would not recommend to anyone.

So far I have tried CCcam 2.1.2, 2.1.1 and the older 2.0.11 and none seem to read the card correctly. Argolis does not have any updated firmware either.

I am curious how is your set up and you don't have any problems. Are you using a Dreambox? gemini image? Version?

[infloop]

After quite a few days of testing it seems like there is ONLY ONE WAY to make g*M*a card to work 100% correctly and that is by using DM800 (most likely 8000 will work as well) and the internal card reader.

Things I used:

DM800 with Gemini2 v4.50 image loaded with CCcam 2.1.3!!! (YES 2.1.3 WORKS PERFECTLY WELL with the internal reader of DM800).
G*MM# OS: v1.4 with "nova_update_15_12_2009_fast au_cy_at_some_cards_gr_at_85-.rar‎"

Infinity USB Smart DID NOT WORK CORRECTLY
SMARGO DID NOT WORK CORRECTLY

No matter what settings I have tried with either SMARGO or Infinity USB Smart, G*m*A card would NEVER work 100% correctly. To be accurate though the best case was with Infinity USB Smart. It was 97% correct only with CCcam 2.1.2 or below but still, there were always errors (pic freezing). To my surprise, ONLY the internal reader of DM800 worked flawlessly without any errors whatsoever, all the time, just like a native card.

The only lines I use in CCcam 2.1.3 config are:

DISABLE EMM : no
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I will update the current thread once I put back the DM7025 but both external card readers had problems so I assume 7025 may also work with one of those readers but most likely will have problems and errors every now and then. Since the same card worked flawlessly in the internal reader of DM800, and since 2 diff brand readers had the same exact problem, this seems to be either an FTDI serial driver problem or a CCcam bug.

PS: I strongly advise the use of "CCcam -d" when you have no clue of what is wrong.