Qbox Hd Image Backup

[passete]

Clean Backup from FD19.03
New radar 4.2 inside, Elgato Hd Skin, Lcd Picons, Settings from 21/03, ...

Release "Fire Distribution Beta" 2010.03.19


Drivers:

- Ticket #411: ci: Fixed bug: Problem with conax cam menu


Enigma2:

- Ticket #405: Fixed bug: HDD stand-by does not work with sdparm.
Note that the USB HDD must be connected to the decoder before turning it on.
A menu appears in Menu->System->Setup->Harddisk->Harddisk Setup that allows
to set when the HDD should enter stand-by mode.
Some USB HDD do not support the internal commands issued by sdparm. However,
most of the HDD produced during the last couple of years support them.
- Ticket #420: Fixed bug: The NIT table doesn't have the correct info with some
terrestrial channel causing that some freqs be skipped when scanning
in automatic mode.
- Ticket #419: Fixed bug: When the DiseqC system detachs/attachs the LNB
sat cable, the tuner doesn't lock again.
- Ticket #409: Fixed bug: Crash if we fail to open/read the file
/proc/bus/nim_sockets.
- Ticket #421: Fixed bug: Crash when detaching USB HardDisk from receiver.
- Ticket #408: Fixed bug: Autoswitch scart
- Ticket #424: Fixed bug: Error when recording from standby with cam.
- Ticket #423: Enhancement: Management of removable devices with enigma2
with Hotplug functionality.
- Ticket #410: Enhancement: Add DVB-T freqs for Copenhagen(Denmark).

http://rapidshare.com/files/366273673/FD_19.03.10.zip

http://www.filefactory.com/file/b0c4489/n/FD_19.03.10.zip

[passete]

New Backup Based on Latest FD 03/05/10

Release "Fire Distribution Beta" 2010.05.03


Bootloader:

- Ticket #379: Fixed bug: Remove the version displayed in the front-panel LCD.


Enigma2:

- Ticket #406: Fixed bug: HDD is not always recognized when attached.
- Ticket #435: Fixed bug: Crash when doing a Backup from the respective menu.
- Ticket #441: Fixed bug: Crash when choosing YPbPr in AV settings.
- Ticket #429: Fixed bug: e2 consumes a lot of CPU under certain circumstances.
- Ticket #430: Fixed bug: When recording in stand-by and turning on,
the live ts was not displayed.


Filesystem:

- Ticket #439: Enhancement: Reduce the write and file-locking traffic
in the filesystem improving the access time.
- Enhancement: Boot time reduced by 3 seconds.

Radar 4.6 Inside Plus all the Usual Stuff
Enjoy.


Code:
http://rapidshare.com/files/38312732...05.10.zipCode:
http://www.filefactory.com/file/b175...p_02.05.10.zip

[passete]

Release “Fire Distribution Beta” 2010.05.11

Enigma2:

Ticket #436: Fixed bug: Automatic scan doesn’t work with 23.5E and 0.8W.
Ticket #437: Fixed bug: Automatic scan in Astra 19.2 doesn’t work with DVB-C in slot 0 and DVB-S2 AVL2108 in slot 1.
Ticket #236: Fixed bug: Missed services when scanning in Astra 19.2.
Ticket #354: Fixed bug: Crash in automatic scan when it changes from terrestrial to satellite and DVB-T tuner is in slot 0 and DVB-S2 tuner is in slot 1.
Ticket #350: Fixed bug: Crash when pressing yellow button in Menu -> Information -> Transponder in Transponder.py.
Ticket #392: Fixed bug: First seconds in some FTA HD channels cause instability.
Ticket #394: Fixed bug: Motor/USALS sometimes doesn’t work properly.
Ticket #321: Fixed bug: Factory reset doesn’t return to original settings.
Ticket #396: Fixed bug: PVR: Seldomly, starting a recording freezes e2 and gives a lot of frame dropping and no audio.
Ticket #146: Fixed bug: e2 does not keep trying to lock when the antenna is not connected.
Ticket #384: Fixed bug: Backup plugin doesn’t work properly.
Ticket #348: Fixed bug: Enigma2 start-up failed at boot.
Ticket #390: Fixed bug: More than two USB devices are properly mounted and handled.
Ticket #284: Fixed bug: wifi: DHCP client doesn’t get an IP address if the wire is connected after e2 starts.
Ticket #382: Enhancement: Generic performance optimization.
Filesystem:

Ticket #448: Enhancement: SSH server (dropbear) is now compiled with scp support. If properly configured, dropbear can substitute telnet and ftp.
Ticket #381: Enhancement: The front-panel LCD always displays an image from bootloader to applications producing a more consistent and smoother start-up experience.
Update package (this .tbz file):

Ticket #428: Fixed bug: Update procedure starts with only one USB pendrive.

Added : Skin Elgato, Lcd Picons, Settings 13°, 19°, 23°, 28° From 12/05, radar 4.6 with Oscam Inside, etc ...

http://rapidshare.com/files/386376435/Backup_12.05.10.zip

http://www.filefactory.com/file/b19hf00/n/Backup_12.05.10.zip

[passete]

FANTASTIC

Softcam Panel with Oscam 3086
Settings from 22.09.10 with 13°, 19°, 23° and 28°
Addons servers From HDfreaks, Ambrosa, Napo, Tappes and Boubaris (some servers are not working)

This is Just a first attempt, so enjoy !

Features:

1. Stability Problem. Most of the stability problems have been successfully solved by using native hardware functions of the STB. In the previous version most of this functions were handled in software. USB Filesystem handling is now much more stable thanks to some fixes on USB drivers. Other low lever drivers have been completely rewritten for more stability. Larger memory for applications (8MB of RAM) now available.

2. Channel Speed. The Channel speed now is less than 3 seconds per each channel while it was from 3 to 6 on previous version.

3. HD Channels and SD bug fixed. HD & SD Channels on some transponders were looping the machine ending a crash if freezes occoured. This problem have been solved in the most critical HD channels. This is not related to scanning on some Thor channels (this needs to use the AVLink tuner and not Sharp). Unfortunately the Sharp tuner has some problems with some transponders and seems like Sharp cannot fix it releasing a firmware for it.
AVLink Tuner has no problem unders this point of view.

4. 3x Tuner finally supported. Finally the "Magic Box" inside is dynamically mixing the Tuner input and output. Now user can finally install any tuner configuration (2xDVB-S2 + 1x DVB-T or DVB-C etc etc) zapping without any problem from Tuner 1 to Tuner 2 to Tuner 3 with no problem.
HOW TO INSTALL NEW TUNER:
Tuner 1 port: DVB-T or DVB-C or DVB-S2 Tuner (Sharp or Avlink)
Tuner 2 port: DVB-T or DVB-C or DVB-S2 Tuner (Sharp or Avlink)
Tuner 3 port: DVB-T or DVB-C NOT DVB-S2 Tuner
Once the tuner/s are installed please do a "Factory Reset" - IMPORTANT!!!

5. PVR is now fully supported and stable. It is possible to record from Tuner x and watch/timeshft on Tuner y. Up to now it is possible to record from one tuner and watch on another tuner. We will enlarge this possibility next.
Example. Watch on Tuner 1 (timeshift also) and record from Tuner 2 or Tuner 3.

6. NAS Server fully working. Now NAS Server is fully supported so it will be possible to use Network HDD or PC.

7. Internal CSA descrambling. Now the box is using the native descrambler inside and not the FPGA descrambler. This is much faster and can support third parties software much easily.

8. Multimedia Center. Multimedia Center completely changed with the following new features:

8.1 MKV, AVI, XVID formats now fully supported.
8.2 MP3 formats now fully supported.
8.3 Picture Player fully supported - NOT LARGER THAN 2 MB
8.4 MyTube (YouTube) fully supported no need for PC. Possibility of recording YouTube movies directly on the Harddrive
8.5 IDEVS. This is the support for IPOD and coming next IPhone. This is an exclusive function that none (AFAIK) is supporting. By connecting your IPOD via USB you can browse the AUDIO and VIDEO contents on your IPOD and play it directly on your TV
8.6 Internet Browser. Linx internet broser is supported using Mouse and Keyboard. This is a small and light Internet browser that will be developed more in the future. Up to now it is supporting simple web pages protocols.
8.7 Other minor appz.
9. Receiver information screen added. Now you can get all the receiver information such as connected tuners, IP address, peripherias etc etc from a dedicated page. All the important informations you have to know about your box are now shown.
This page is inside Infromation->Receiver Information menu. It is very important to have a look at this to have a shortcut to all the settings of the receiver like Tuner Status, IP Address, Keyboard, IPOD connection etc etc.

10. Menu structure is completely changed to make it more user friendly.

11. HD Skin by default with automatic screen resize.

12. HDMI and other video Output problems solved.

13. Minor bugs are solved and general stability is improved uncomparably with the previous version especailly if freezes are coming from the streaming.
WebInterface fully working, Teletext fully working etc etc

Known bugs:

1. Minor bugs related to menus (like OSD languages not translated in full) and other small menu leaks.

2. Motor scan on 4W is stopping. Work in progress.

3. DVB-C scanning is now working just with pre-loaded settings.

http://www.filefactory.com/file/b399e8c/n/22.09.2010.zip

[passete]

Settings from 03/10/2010 for 13, 19, 23 and 28° Sats
Addons From HDfreaks, Ambrosa, Napo, Tappes and Boubaris
Qbox Softcam Panel V2.1.0
Oscam 3086 New (Setup your Config By Remote Control)
IncubusCamd 0.97
Mbox 0.5B21
Mbox-Newcs
MGcamd 1.35
LCD Picons
...

Stone Distribution Filesystem version 1.02 for QBoxHD available 03/10/2010
 
 
- Bugfix: Ticket #610: Scan with the motor doesn’t work as expected
- Bugfix: Ticket #633: The new frontend.cpp is not compatible with the RETRY_LOCK patch
- Bugfix: Ticket #575: Automatic scan of dvb-c tuner doesn’t work
- Bugfix: Ticket #376: wifi: Sometimes the fw is not properly loaded or it doesn’t load at the right time
- Bugfix: Ticket #581: SCART output doesn’t work after choosing it as output mode in the video output options.
- Bugfix: Ticket #203: USB reset
- Bugfix: Ticket #291: Problem when zapping from a DVB-S tuner to tuner a DVB-T
- Bugfix: Ticket #599: Pause doesn’t completely freezes the TS.
- Enhancement: Several improvements in default skin
- Enhancement: Add translations for italian and french
 
Faster channel zapping (0,5 secs less)

http://www.filefactory.com/file/b3c7...03.10.2010.zip

[passete]

Sorry, but forgot to change my password !

Here the same Backup with Normal Password

root
qboxhd

 http://www.filefactory.com/file/b3cc...04.10.2010.zip

[passete]

- Bugfix: Ticket #634: The update procedure doesn’t distinguish the boards type
- Bugfix: Ticket #619: Remove empty default service list
- Bugfix: Ticket #623: Use the ‘exit’ button for leaving the video menu
- Bugfix: Ticket #638: When pressing Timeshift for MKV, the play terminate
- Bugfix: Ticket #639: Recording with a Timer works only for hdd and not for
a NAS.
- Bugfix: Ticket #636: Scan and zap: Some tp doesn’t lock in single and dual
feed.
- Bugfix: Ticket #209: Timezone is not working properly for all countries
- Bugfix: Ticket #283: Crash in eDVBCIInterfaces::setInputSource(0 0)
- Enhancement: Updated smartcard driver
- Enhancement: Updated programmable transport interface driver
- Enhancement: Add translations for arabic

Oscam 3497
Settings from 22.10 for 13°, 19°, 23° and 28°
Addons servers
etc...

User : root
Password : qboxhd

http://www.filefactory.com/file/b3h3...oxhd_23.10.zip

[passete]

Backup from Stone Distrubution 1.04
- Bugfix: Ticket #634: The update procedure doesn’t distinguish the boards type
- Bugfix: Ticket #619: Remove empty default service list
- Bugfix: Ticket #623: Use the ‘exit’ button for leaving the video menu
- Bugfix: Ticket #638: When pressing Timeshift for MKV, the play terminate
- Bugfix: Ticket #639: Recording with a Timer works only for hdd and not for
a NAS.
- Bugfix: Ticket #636: Scan and zap: Some tp doesn’t lock in single and dual
feed.
- Bugfix: Ticket #209: Timezone is not working properly for all countries
- Bugfix: Ticket #283: Crash in eDVBCIInterfaces::setInputSource(0 0)
- Enhancement: Updated smartcard driver
- Enhancement: Updated programmable transport interface driver
- Enhancement: Add translations for arabic

What's New :
Oscam 3714

Radar 420
Here you go......
Now RaDaR is supporting Stone distribution for Qbox Mini and QboxHd all smartcard reading are supported now
RaDaR cannot work together with Oscam at present.
Radar:All Viaccess Providers updated: Canal Digitaal in Seca 2 all remaining channles in Seca 2 are now working!!!
TNTSat (HD and SD), Bis, SRG Swiss and more coming soon!

User : root
Password: qboxhd

http://www.filefactory.com/file/b3hg...oxhd_26.10.zip

[passete]

NEW STONE 1.0.7 for QBoxHD
Release "Stone Distribution" 1.0.7

- Bugfix: Ticket #679: Crash in player2 when Enigma2 restart after a dirty kill.
- Bugfix: Ticket #562: Crash when using web interface and start recording
simultaneously enigma.
- Bugfix: Ticket #569: Crash after removing/inserting the antenna cable
several times.
- Bugfix: Ticket #677: Second encrypted channel is not visible when stopping
and starting a new encrypted recording/zapping.
- Bugfix: Ticket #680: Added the aspect ratio scart pin management.
- Bugfix: Ticket #668: SNR of DVB-T zl10353 seems to be incorrect
- Bugfix: Ticket #449: Check that SPDIF encoding and bypass work properly
- Bugfix: Ticket #589: It's slow when you navigating internet, some
addresses are not found.
- Bugfix: Ticket #560: Resize video inside menu.
- Bugfix: Ticket #664: Backup script has problem with the NOR flash.
- Bugfix: Ticket #673: White screen when leaving teltext.
- Bugfix: Ticket #433: U-Boot: Reduce the brightness.
- Enhancement: Ticket #682: Big memory optimization. Additional 4MB are now
available.
- Enhancement: Ticket #669: Add dir /etc/rc.d for third party scripts
- Enhancement: Ticket #676: New VLC server version 1.1.4.1
- Enhancement: Ticket #678: Optimize camd socket management.
- Enhancement: Ticket #680: Add support for network tunneling (tun/tap).
Compiled as module: tun.ko
- Enhancement: Added support for recording two services from the same
transponder.
- Enhancement: Added languages: polish and updated italian.
- Enhancement: Ticket #675: Add support for USB wireless network adapters based
on the zd1211rw driver.

**************
- RADAR 422 -
**************

Satellite Sharing now activated no need for Internet!

Watch all your favorite channels using the second tuner on your QBoxHD or QBoxMini.

This system is the same as a satellite dongle using internal tuner on your QBox.

*****************
How to install??
*****************

FIRMWARE:
Make sure you have installed the version Stone 1.0.7 or further if you have a QBoxHD and 0.50 or further if you have a mini!

HARDWARE:
Make sure you have the second DVB-S2 tuner installed in your Qbox mini or QboxHD (So 2*DVB-S2 Tuner)
Make sure you have one antenna oriented on W3A (7° East) for SatSharing and connected to one Tuner DVB-S2 (no matter which one) to such antenna.
The other antenna must be set on the satellite you want to descramble between the supported satellites and connected to one Tuner DVB-S2 (no matter which one).

Final configuration for SatSharing:

•QboxHD (Stone 1.0.7 or further) or Qbox mini (ver 0.50 of further)
•DVB-S2 Tuner with antenna oriented on W3A (7° East) connected to one tuner DVB-S2.Sharing tuner
•DVB-S2 Tuner with antenna oriented on 13,°E or 19,2°E connected to nne tuner DVB-S2.Descrambling Tuner
•Radar 4.21 or further up and running.

Supported Channels via SatSharing:

OSN 7W NileSat - Supported also after I2 switchoff the 19th dec!
Csat 19,2° E
BIS 13°E
BIS 19,2°E
AlJazeera Sport 13° E
TNT Sat (not stable as long as the AES method is chaning in these days) available on EMU
Free X TV
And much more...

*****************
EMUS
*****************

Fixed TNTSat
SRG Swiss
Canal Plus NL in S2 and I2
all the rest and more coming

Plus : Oscam 4060, Spiner HD Freaks, Settings from 10/12 for 13, 19, 23 and 28, 4 Diferents Skins, etc ...

name : root
passwd : qboxhd

http://www.filefactory.com/file/b4a0g0c/n/Qbox_HD_10.12.10.zip

[passete]

Based on a Leaked 1.0.12 SD version

Youtube is Working again ...

Please visit the official Duolabs forum for
feedback on this QBoxHD software release. Your help will be greatly appreciated!

======================================== ========== ==============================

Release "Stone Distribution" 1.0.12

- Bugfix: Ticket #684: During automatic scan some NITs override our right
DVBS2 frequency with wrong parameters.
- Bugfix: Ticket #697: SPDIF configuration doesn't work properly when e2 starts.
- Bugfix: Ticket #695: NAS unmount doesn't re-create the hdd dir.
- Bugfix: Ticket #696: Add EPG path 2.0.1
- Bugfix: A lot of minor bugfixes.

======================================== ========== ==============================

Latest Radar, Oscam, skin, Bootlogo, settings, etc...

http://www.filefactory.com/file/b4eed6a/n/QboxHd.03.01.11.zip

http://www.megaupload.com/?d=EQW0TK28