Acamd "can't initialize card" au démarrage

[ollvin]

Bonjour à tous,

J'utilise DVBViewer pour regarder mon abonnement CanalSat crypté en IPTV par Orange avec le plugin Acamd et un lecteur de carte phoenix Infinity USB Smart.

Sur ma première config cela marchait bien mais j'essaie actuellement de l'installer sur un autre pc et là Acamd ne parvient jamais à se connecter à ma carte au démarrage, il faut toujours que je fasse un réglage manuel (comme désactiver/réactiver le port COM virtuel) pour qu'il se connecte finalement.

Y a-t-il un réglage qu'on peut ajuster (peut-être un cache, ou qqch du genre) pour éviter ce blocage qui enlève pas mal d'intérêt au système ?

Sinon, je peux peut-être tester un autre plugin compatible DVBViewer mais je suis un peu noyé dans la pléthore de dl disponibles sur ce forum... Une suggestion ? Il n'y a pas un résumé sur les différents plugins quelquepart ?

Merci d'avance

Voici le détail du moniteur acamd (ça bloque à "Incomming PackageSize [188]") :

17:30:14.906: ACamd v0.6.1.8
17:30:15.187: systems: registering CA system Cardclient, pri -15, ident 1000
17:30:15.187: structloaders: registering loader cardclient config
17:30:15.187: cardclients: registering cardclient Newcamd
17:30:15.187: cardclients: registering cardclient Newcamd2
17:30:15.187: cardclients: registering cardclient CCcamN
17:30:15.187: cardclients: registering cardclient Radegast
17:30:15.187: cardclients: registering cardclient Camd35
17:30:15.187: cardclients: registering cardclient EmuBox03
17:30:15.187: cardclients: registering cardclient Gbox
17:30:15.187: cardclients: registering cardclient GboxN
17:30:15.187: cardclients: registering cardclient MboxN
17:30:15.187: structloaders: registering loader smartcard data
17:30:15.187: systems: registering CA system SC-Irdeto, pri -10, ident 1001
17:30:15.187: feature: using feature SMARTCARD
17:30:15.187: registering Irdeto smartcard (id 49726474)
17:30:15.187: systems: registering CA system SC-Seca, pri -10, ident 1002
17:30:15.187: registering Seca smartcard (id 53656361)
17:30:15.187: systems: registering CA system SC-Viaccess, pri -10, ident 1003
17:30:15.187: registering Viaccess smartcard (id 56696173)
17:30:15.187: systems: registering CA system SC-Conax, pri -10, ident 1004
17:30:15.187: registering Conax smartcard (id 436f6e78)
17:30:15.187: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
17:30:15.187: registering Cryptoworks smartcard (id 4372576f)
17:30:15.187: systems: registering CA system SC-Nagra, pri -10, ident 1006
17:30:15.187: registering Nagra smartcard (id 4e616772)
17:30:15.187: systems: registering CA system SC-***, pri -10, ident 1007
17:30:15.187: registering *** smartcard (id 56694732)
17:30:15.203: Monitor listen on port 1053
17:30:15.281: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
17:30:15.281: Engine [DVB Viewer Pro]
17:30:15.281: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
17:30:15.281: loaded 9 smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
17:30:15.281: loading cardclient config from C:\Program Files\DVBViewer\Plugins\cardclient.conf
17:30:15.281: ** registered systems:
17:30:15.281: ** SC-*** (pri -10)
17:30:15.281: ** SC-Nagra (pri -10)
17:30:15.281: ** SC-Cryptoworks (pri -10)
17:30:15.281: ** SC-Conax (pri -10)
17:30:15.281: ** SC-Viaccess (pri -10)
17:30:15.281: ** SC-Seca (pri -10)
17:30:15.281: ** SC-Irdeto (pri -10)
17:30:15.281: ** Cardclient (pri -15)
17:30:15.281: COM2: open serial port
17:30:15.281: COM2: set serial options: 9600,SM_8O1
17:30:15.281: smartcards: added serial port COM2 as port 0 (normal CD, normal RESET, CLOCK 3571200)
17:30:15.281: 0: new card inserted
17:30:15.281: COM2: set serial options: 9600,SM_8O1
17:30:15.281: 0: reseting card
17:30:17.000:
17:30:17.000: Ch: 2101 - 043. AB1
17:30:17.000: Programm crc: D99B97D0
17:30:17.000: PMT: ACamd_PMT.txt, search, not found PMT=0835 (AND SID=07D1)
17:30:17.000: PMT: chcache.ini, 0835,07D1,0500,00025020,0B55,0000,043. AB1
17:30:17.031: Trying Irdeto (T=14)
17:30:17.031: COM2: set serial options: 5760,SM_8O1
17:30:17.031: 0: reseting card
17:30:19.000: 0: reset/atr error
17:30:19.000: 0: can't initialise new card, ignoring port until card reinserted
17:30:19.000: 0x0835 0x07D1 0x0500 0x00025020 0x0B55 0x0000 11111110
17:30:19.078: Incomming PackageSize [188]

------ ça coince ici, ensuite, je reconnecte manuellement ------------

17:31:21.500: COM2: shutting down
17:31:21.625: COM2: shutdown done
17:31:21.625: no smartcard interface defined!
17:31:24.015: COM2: open serial port
17:31:24.031: COM2: set serial options: 9600,SM_8O1
17:31:24.031: smartcards: added serial port COM2 as port 0 (normal CD, normal RESET, CLOCK 3571200)
17:31:24.281: 0: new card inserted
17:31:24.281: COM2: set serial options: 9600,SM_8O1
17:31:24.281: 0: reseting card
17:31:26.140: 0: indirect convention detected
17:31:26.140: 0: atr decoding TS=3f hist=7 Y1=70 TA1=18 F=372 D=0.000000 TB1=00 TC1=00 N=0 Y2=00
0: historical: c2 47 40 00 68 90 00
0: historical: '[email protected]..
Blocked 2 same messages...
17:31:26.140: 0: atr checksum not given/not required
17:31:26.140: 0: indicated wwt(T0)=1000 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
17:31:26.140: 0: Init Viaccess card
17:31:26.140: COM2: wrong baudrate set to defaultCOM2: set serial options: 9600,SM_8O2
17:31:26.140: card v.unknown
17:31:26.453: card UA: 3330158176
17:31:27.640: provider FFF400 (ISSUER)
17:31:28.812: provider 008230 (CANALSAT)
17:31:29.953: provider 025030 (RESERVE2)
17:31:31.125: provider 008220 (CANAL+)
17:31:32.265: provider 025020 (Bouquet MLTV Fr)
17:31:33.437: provider 025000 (FTVOD)
17:31:34.562: provider 025010 (TPSL)
17:31:34.734:
17:31:34.734: Ch: 2101 - 043. AB1
17:31:34.734: Programm crc: D99B97D0
17:31:34.734: PMT: ACamd_PMT.txt, search, not found PMT=0835 (AND SID=07D1)
17:31:34.734: PMT: chcache.ini, 0835,07D1,0500,00025020,0B55,0000,043. AB1
17:31:34.734: 0x0835 0x07D1 0x0500 0x00025020 0x0B55 0x0000 11111110
17:31:35.750: SC-Viaccess 0: ECM [0B55][0500/00025020] Pro (0.937)
17:31:35.750: [00] SendDCW Odd: :9CC873D7605AE29C
17:31:35.750: [00] SendDCW Even: 5BE0D611971233DC:
17:31:37.484: SC-Viaccess 0: ECM [0B55][0500/00025020] Pro (0.625)
17:31:37.484: [00] SendDCW Odd: :35879955F46CBE1E
17:31:47.531: SC-Viaccess 0: ECM [0B55][0500/00025020] Pro (0.610)
17:31:47.531: [00] SendDCW Even: 0986E776DED38C3D:

...

[ollvin]

Up !

Est-ce que quelqu'un pourrait au moins m'indiquer un autre plugin pour lire ma carte sur port com avec DVBViewer ? J'ai essayé UVCE mais il ne semble pas fonctionner sous DVBViewer... Est-ce que les plugins de partage comme Newcs ont une simple fonction de lecture sur port Com ?

Help !

[ollvin]

Des fois, je me sens seul... Peut-être que je sens le pâté...

Dernier essai :
J'ai installé newcs pour contourner le problème et je test, au cas où, acamd en client (après tout je ne sais pas quel est le problème). Newcs trouve ma carte et m'affiche bien que l'utilisateur est loggé

[ 15:09:16 ] [ Newcamd:15001 ] User dummy logged in, client: Generic

mais acamd ne parvient pas lire (voir log).
Note : le cryptage est en Viaccess 3. Est-ce que c'est compatible avec newcs et le protocole newcamd ?

Une suggestion ? Un autre client compatible DVBViewer ?

... Démarrage acamd...

15:09:14.062: now using protocol version 525 (cdLen=8)
15:09:14.062: hostname=localhost port=15001 emm=1 emmCaids 0000/0000
15:09:14.062: Newcamd: username=dummy password=dummy key=0102030405060708091011121314 providers=none
15:09:14.062: client 'Newcamd' ready
15:09:14.062: ** registered systems:
15:09:14.062: ** SC-NDS            (pri -10)
15:09:14.062: ** SC-Nagra          (pri -10)
15:09:14.062: ** SC-Cryptoworks    (pri -10)
15:09:14.062: ** SC-Conax          (pri -10)
15:09:14.062: ** SC-Viaccess       (pri -10)
15:09:14.062: ** SC-Seca           (pri -10)
15:09:14.062: ** SC-Irdeto         (pri -10)
15:09:14.062: ** Cardclient        (pri -15)
15:09:14.062: no smartcard interface defined!
15:09:15.406: 
15:09:15.406: Ch: 2109 - 040. RTL9 
15:09:15.406: Programm crc: 932E99EE
15:09:15.406: PMT: ACamd_PMT.txt, search, not found PMT=083D (AND SID=07D9)
15:09:15.406: PMT: chcache.ini, 083D,07D9,0500,00025020,0B5D,0000,040. RTL9
15:09:15.406: 0x083D 0x07D9 0x0500 0x00025020 0x0B5D 0x0000 11111110
15:09:15.484: Incomming PackageSize [188]
15:09:15.562: Login attemp (1)
15:09:15.609: connecting to localhost:15001/tcp (127.0.0.1)
15:09:16.781: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C67E2E60 provider 025010/00000000C67E2E60 025000/00000000C67E2E60 025020/00000000C67E2E60 008220/00000000C67E2E60 025030/00000000C67E2E60 008230/00000000C67E2E60 FFF400/00000000C67E2E60
15:09:16.781: Newcamd 0: ECM [0B5D][0500/00025020] Pro (0.000)
15:09:16.781: Newcamd 0: ECM [0B5D][0500/00025020] not able to decode
15:09:16.812: Newcamd 0: ECM [0B5D][0500/00025020] Pro (0.000)
15:09:16.812: Newcamd 0: ECM [0B5D][0500/00025020] not able to decode
...

[tourou]

salut

deja est ce que newcs lis ta carte ?

poste ton newcs.log complet

[ollvin]

En fait, ça marche... quand ça veut.

Je lance newcs, il voit bien la carte, puis se met à "servir".

This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:48:56
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 13:47:25 ] [ Box detect ] Windows XP Build 2600
[ 13:47:25 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface COM2) not present, defaulti
ng to NO
[ 13:47:25 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface COM2) is INVALID, skipping...

[ 13:47:25 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface COM2) is INVALID, skipping..
.
[ 13:47:25 ] [ Config ] Pincode for device 0 (Phoenix Interface COM2): 0000
[ 13:47:25 ] [ Config ] COM2 ECM priority: round
[ 13:47:25 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 13:47:25 ] [ EMM Cache ] Initialising dynamic Cache
[ 13:47:25 ] [ ECM Cache ] Initialising dynamic Cache
[ 13:47:25 ] [ Loader ] Starting Telnet on port 1001
[ 13:47:25 ] [ Loader ] Started HTTP-server on port: 8080
[ 13:47:25 ] [ Loader ] Reader type 2 on node COM2
[ 13:47:25 ] [ Phoenix ] Opening device COM2
[ 13:47:25 ] [ Phoenix ] Setting parity to ODD on node COM2
[ 13:47:25 ] [ Phoenix ] Setting 1 Stop bit on node COM2
[ 13:47:25 ] [ Phoenix ] Setting baud to 9600
[ 13:47:27 ] [ ATR ] T=0  1etu=8.68us  Guardtime:12etu  WWT:115200etu
[ 13:47:27 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 13:47:27 ] [ Loader ] Init Viaccess card
[ 13:47:27 ] [ Phoenix ] Setting parity to ODD on node COM2
[ 13:47:27 ] [ Phoenix ] Setting 1 Stop bit on node COM2
[ 13:47:27 ] [ Phoenix ] Setting baud to 9600
[ 13:47:27 ] [ Keyman ] Adding key C67E2E60 type 0 on Provider 000000 for caid 0500 ID=0
[ 13:47:28 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider FFF400 for caid 0500 ID=0
[ 13:47:29 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 008230 for caid 0500 ID=1
[ 13:47:30 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 025030 for caid 0500 ID=2
[ 13:47:31 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 008220 for caid 0500 ID=3
[ 13:47:32 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 025020 for caid 0500 ID=4
[ 13:47:33 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 025000 for caid 0500 ID=5
[ 13:47:33 ] [ Keyman ] Adding key C67E2E60 type 1 on Provider 025010 for caid 0500 ID=6
[ 13:47:34 ] [ Loader ] Card 0500 on port COM2 ready
[ 13:47:34 ] [ Loader ] Starting Newcamd Server on port 15001
[ 13:47:34 ] [ Newcamd ] Newcamd thread Server started on port 15001

Acamd se connecte et accroche bien les chaînes

13:50:59.671: ACamd v0.6.1.8
13:51:00.515: systems: registering CA system Cardclient, pri -15, ident 1000
13:51:00.515: structloaders: registering loader cardclient config
13:51:00.515: cardclients: registering cardclient Newcamd
13:51:00.515: cardclients: registering cardclient Newcamd2
13:51:00.515: cardclients: registering cardclient CCcamN
13:51:00.515: cardclients: registering cardclient Radegast
13:51:00.515: cardclients: registering cardclient Camd35
13:51:00.515: cardclients: registering cardclient EmuBox03
13:51:00.515: cardclients: registering cardclient Gbox
13:51:00.515: cardclients: registering cardclient GboxN
13:51:00.515: cardclients: registering cardclient MboxN
13:51:00.515: structloaders: registering loader smartcard data
13:51:00.515: systems: registering CA system SC-Irdeto, pri -10, ident 1001
13:51:00.515: feature: using feature SMARTCARD
13:51:00.515: registering Irdeto smartcard (id 49726474)
13:51:00.515: systems: registering CA system SC-Seca, pri -10, ident 1002
13:51:00.515: registering Seca smartcard (id 53656361)
13:51:00.515: systems: registering CA system SC-Viaccess, pri -10, ident 1003
13:51:00.515: registering Viaccess smartcard (id 56696173)
13:51:00.515: systems: registering CA system SC-Conax, pri -10, ident 1004
13:51:00.515: registering Conax smartcard (id 436f6e78)
13:51:00.515: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
13:51:00.515: registering Cryptoworks smartcard (id 4372576f)
13:51:00.515: systems: registering CA system SC-Nagra, pri -10, ident 1006
13:51:00.515: registering Nagra smartcard (id 4e616772)
13:51:00.515: systems: registering CA system SC-NDS, pri -10, ident 1007
13:51:00.515: registering NDS smartcard (id 56694732)
13:51:00.546: Monitor listen on port 1646
13:51:00.624: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
13:51:00.624: Engine [DVB Viewer Pro]
13:51:00.624: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
13:51:00.624: loaded 9 smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
13:51:00.624: loading cardclient config from C:\Program Files\DVBViewer\Plugins\cardclient.conf
13:51:00.624: now using protocol version 525 (cdLen=8)
13:51:00.624: hostname=localhost port=15001 emm=1 emmCaids 0000/0000
13:51:00.624: Newcamd: username=dummy password=dummy key=0102030405060708091011121314 providers=none
13:51:00.624: client 'Newcamd' ready
13:51:00.624: ** registered systems:
13:51:00.624: ** SC-NDS            (pri -10)
13:51:00.624: ** SC-Nagra          (pri -10)
13:51:00.624: ** SC-Cryptoworks    (pri -10)
13:51:00.624: ** SC-Conax          (pri -10)
13:51:00.624: ** SC-Viaccess       (pri -10)
13:51:00.624: ** SC-Seca           (pri -10)
13:51:00.624: ** SC-Irdeto         (pri -10)
13:51:00.624: ** Cardclient        (pri -15)
13:51:00.624: COM5: open serial port
13:51:00.624: COM5: open failed: No error
13:51:00.624: failed to open serial port COM5
13:51:00.624: COM5: shutting down
13:51:00.624: COM5: shutdown done
13:51:00.624: no smartcard interface defined!
13:51:01.921: 
13:51:01.921: Ch: 1289 - 151. Mezzo 
13:51:01.921: Programm crc: 06346D0B
13:51:01.937: PMT: ACamd_PMT.txt, search, not found PMT=0509 (AND SID=019A)
13:51:01.937: PMT: chcache.ini, 0509,019A,0500,00008230,100C,0000,151. Mezzo
13:51:01.937: 0x0509 0x019A 0x0500 0x00008230 0x100C 0x0000 11111110
13:51:01.953: Incomming PackageSize [188]
13:51:01.968: Login attemp (1)
13:51:02.156: connecting to localhost:15001/tcp (127.0.0.1)
13:51:03.499: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C67E2E60 provider 025010/00000000C67E2E60 025000/00000000C67E2E60 025020/00000000C67E2E60 008220/00000000C67E2E60 025030/00000000C67E2E60 008230/00000000C67E2E60 FFF400/00000000C67E2E60
13:51:04.359: Newcamd 0: ECM [100C][0500/00008230] Pro (0.859)
13:51:04.359: [00] SendDCW Odd:                  :B6F22CD4E523626A
13:51:04.359: [00] SendDCW Even: 1DAE23EEE94BF024:
13:51:04.453: Newcamd 0: ECM [100C][0500/00008230] Pro (0.000)
13:51:04.453: Newcamd 0: ECM [100C][0500/00008230] not able to decode
13:51:06.390: Newcamd 0: ECM [100C][0500/00008230] Pro (0.625)
13:51:06.390: [00] SendDCW Odd:                  :DA440C2AC22AFAE6
13:51:17.546: 
13:51:24.640: Ch: 1134 - 047. TEVA 
13:51:24.640: Programm crc: CE731BCE
13:51:24.671: PMT: ACamd_PMT.txt, search, not found PMT=046E (AND SID=040A)
13:51:24.671: PMT: chcache.ini, 046E,040A,0500,00025020,078E,0000,047. TEVA
13:51:24.671: 0x046E 0x040A 0x0500 0x00025020 0x078E 0x0000 11111110
13:51:25.562: Newcamd 0: ECM [078E][0500/00025020] Pro (0.703)
13:51:25.562: [00] SendDCW Odd:                  :EDDB27EF2F073F75
13:51:25.562: [00] SendDCW Even: D17F15656B525916:
13:51:29.640: Newcamd 0: ECM [078E][0500/00025020] Pro (1.015)
13:51:29.640: [00] SendDCW Odd:                  :45953D177D1B25BD
13:51:34.062: 
13:51:34.062: Ch: 1306 - 081. Eurosport 
13:51:34.062: Programm crc: 2F3D465C
13:51:34.281: PMT: ACamd_PMT.txt, search, not found PMT=051A (AND SID=1FD7)
13:51:34.281: 0x051A 0x1FD7 0x0500 0x00008210 0x10A6 0x0000 11111110
13:51:35.484: Newcamd 0: ECM [10AC][0500/00008230] Pro (1.094)
13:51:35.499: [00] SendDCW Odd:                  :07C75826CB63CBF9
13:51:35.499: [00] SendDCW Even: 8127E28A601281F3:
13:51:39.437: Newcamd 0: ECM [10AC][0500/00008230] Pro (0.578)
13:51:39.437: [00] SendDCW Even: ADEF44E0920DBC5B:
13:51:50.249: Newcamd 0: ECM [10AC][0500/00008230] Pro (0.563)
13:51:50.249: [00] SendDCW Odd:                  :C25B86A360CBB8E3
13:52:00.718: Newcamd 0: ECM [10AC][0500/00008230] Pro (0.578)
13:52:00.718: [00] SendDCW Even: 0BE52C1C73732C12:
13:52:11.562: Newcamd 0: ECM [10AC][0500/00008230] Pro (0.594)
13:52:11.562: [00] SendDCW Odd:                  :CC41EAF76B724F2C
13:52:22.390: Newcamd 0: ECM [10AC][0500/00008230] Pro (0.593)
13:52:22.390: [00] SendDCW Even: 4A31BD38D8903EA6:

Tout va bien dans newcs :

[ 13:48:04 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:48:05 ] [ Newcamd ] ECM -> dummy (NOT OK) 0500 0000 07D8
[ 13:48:10 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 07D8
[ 13:48:19 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 07D8
[ 13:48:29 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 07D8
[ 13:48:39 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 07D8
[ 13:48:49 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 07D8
[ 13:48:55 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 084D
[ 13:48:57 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 084D
[ 13:49:14 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1083
[ 13:49:17 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1083
[ 13:49:21 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1081
[ 13:49:28 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 200E
[ 13:49:30 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 200E
[ 13:49:41 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 200E
[ 13:49:52 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 200E
[ 13:50:03 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 21FF
[ 13:50:09 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 0FA1
[ 13:50:15 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 0FA1
[ 13:50:25 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 0FA1
[ 13:50:35 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 019A
[ 13:50:44 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 019A
[ 13:50:54 ] [ Newcamd:15001 ] User dummy logout
[ 13:51:03 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:51:04 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 019A
[ 13:51:06 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 019A
[ 13:51:18 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 019A
[ 13:51:19 ] [ Newcamd ] ECM -> dummy (NOT OK) 0500 0000 0BC6
[ 13:51:25 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 040A
[ 13:51:29 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 040A
[ 13:51:35 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7
[ 13:51:39 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7
[ 13:51:50 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7
[ 13:52:00 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7
[ 13:52:11 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7
[ 13:52:22 ] [ Newcamd ] ECM -> dummy (OK) 0500 0000 1FD7

Et quelque part par là dans acamd, la chaîne fige :

13:52:52.718: socket: select timed out (20000 ms)
13:52:52.718: recv error. reconnecting...
13:52:52.718: Newcamd 0: warning an unexpected error occurred
13:52:52.718: Newcamd 0: ECM [10AC][0500/00008230] Pro (20.000)
13:52:52.718: Newcamd 0: ECM [10AC][0500/00008230] not able to decode
13:52:52.734: Login attemp (1)
13:52:52.734: connecting to localhost:15001/tcp (127.0.0.1)
13:52:52.749: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C67E2E60 provider 025010/00000000C67E2E60 025000/00000000C67E2E60 025020/00000000C67E2E60 008220/00000000C67E2E60 025030/00000000C67E2E60 008230/00000000C67E2E60 FFF400/00000000C67E2E60
13:53:12.749: socket: select timed out (20000 ms)
13:53:12.749: recv error. reconnecting...
13:53:12.765: Newcamd 0: warning an unexpected error occurred
13:53:12.765: Newcamd 0: ECM [10AC][0500/00008230] Pro (20.015)
13:53:12.765: Newcamd 0: ECM [10AC][0500/00008230] not able to decode
13:53:12.765: Login attemp (1)
13:53:12.765: connecting to localhost:15001/tcp (127.0.0.1)
13:53:12.781: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C67E2E60 provider 025010/00000000C67E2E60 025000/00000000C67E2E60 025020/00000000C67E2E60 008220/00000000C67E2E60 025030/00000000C67E2E60 008230/00000000C67E2E60 FFF400/00000000C67E2E60
13:53:32.781: socket: select timed out (20000 ms)
13:53:32.781: recv error. reconnecting...
13:53:32.781: Newcamd 0: warning an unexpected error occurred
13:53:32.781: Newcamd 0: ECM [10AC][0500/00008230] Pro (20.000)
13:53:32.781: Newcamd 0: ECM [10AC][0500/00008230] not able to decode
13:53:32.781: Login attemp (1)

Toujours rien quand je change de chaine :

13:55:11.734: 
13:55:11.734: Ch: 1281 - 085. Eurosport 2 
13:55:11.734: Programm crc: 96BFDABA
13:55:12.890: socket: select timed out (20000 ms)
13:55:12.890: recv error. reconnecting...
13:55:12.890: Newcamd 0: warning an unexpected error occurred
13:55:12.890: Newcamd 0: ECM [10AC][0500/00008230] Pro (20.000)
13:55:12.890: Newcamd 0: ECM [10AC][0500/00008230] not able to decode
13:55:13.328: PMT: ACamd_PMT.txt, search, not found PMT=0501 (AND SID=09C6)
13:55:13.328: 0x0501 0x09C6 0x0500 0x00008210 0x0FB7 0x0000 11111110
13:55:13.421: Login attemp (1)
13:55:13.421: connecting to localhost:15001/tcp (127.0.0.1)
13:55:13.437: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C67E2E60 provider 025010/00000000C67E2E60 025000/00000000C67E2E60 025020/00000000C67E2E60 008220/00000000C67E2E60 025030/00000000C67E2E60 008230/00000000C67E2E60 FFF400/00000000C67E2E60
13:55:18.078: 
13:55:18.078: Ch: 1280 - 082. InfoSport 
13:55:18.078: Programm crc: B7C0E1A2
13:55:20.109: PMT not found...
13:55:22.124: CAT not found...
13:55:22.124: 
13:55:22.124: Ch: 1134 - 047. TEVA 
13:55:22.124: Programm crc: CE731BCE
13:55:22.140: PMT: ACamd_PMT.txt, search, not found PMT=046E (AND SID=040A)
13:55:22.140: PMT: chcache.ini, 046E,040A,0500,00025020,078E,0000,047. TEVA

Dans newcs, ça donne ça :

[ 13:52:52 ] [ Newcamd:15001 ] User dummy logout
[ 13:52:52 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:53:12 ] [ Newcamd:15001 ] User dummy logout
[ 13:53:12 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:53:32 ] [ Newcamd:15001 ] User dummy logout
[ 13:53:32 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:53:52 ] [ Newcamd:15001 ] User dummy logout
[ 13:53:52 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:54:12 ] [ Newcamd:15001 ] User dummy logout
[ 13:54:12 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:54:32 ] [ Newcamd:15001 ] User dummy logout
[ 13:54:32 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:54:52 ] [ Newcamd:15001 ] User dummy logout
[ 13:54:52 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:55:12 ] [ Newcamd:15001 ] User dummy logout
[ 13:55:13 ] [ Newcamd:15001 ] User dummy logged in, client: Generic
[ 13:55:33 ] [ Newcamd:15001 ] User dummy logout
[ 13:55:33 ] [ Newcamd:15001 ] User dummy logged in, client: Generic

Acamd se delog, relog sans arriver à lire.

Après, j'ai beau fermer DVBViewer (et donc acamd) et newcs et rallumer, on en est au même point. Il faut que je fasse la même manip dont j'ai parlé dans mon premier post, dans acamd, à savoir changer un option, pour tout décoincer. J'y comprends rien. Enfin, si je pouvais me passer d'acamd, ça réglerait peut-être le problème.
Tiens, là, pendant que je viens d'écrire ce long post, la connexion est restée bien sage, je peux zapper sans problème. Bref, très aléatoire.

[tourou]

je serai toi je testerai la version 5.9 d'acamd elle est plus stable a mon gout

tu devrai aussi désactiver le port com dans acamd