I will try my best
you will need these softwares infinity USB unlimited 2.78 & Millennium Card Loader 1.0.2.0
1: open the infinity software
2: click on the Tools button
3: click on Virtual COM port (VCP) mode
4: set the COM port to COM10
5: reset-polarity to Phoenix
6: frequency to 3.579
7: voltage to 5.0 v
8: optimized VCP profile to default
9: click enable, the infinity software is now in VCP mode and will only show as a icon bottom right of your screen
10: open Millennium Card Loader software
11: set COM port to COM10
12: set speed to fast
13: insert Millennium card plus (pic chip should face upwards)
14: click on connect
15: click on programme
16: click on latest Millcard file
17: wait until card is loaded.
18: insert card in receiver an enjoy
Millenuim user's IMPORTANT TO KNOW :
Warning if you use other infinity programmer to program the Millennium card You should use an real COM Port ! (USB to COM cable Doesnt Work with Loader, Only PCMCIA to com can work , but not stable.
Reply With Quote
