problem with csat HD channels on Mil12

[polteris]

JSC +9 and JSC+10 not work for me!!

[bokili84]

Yes, dont work because jsc sport shut down the old coding on this 2 channels and now use ONLY new Viaccess 4.0
Look here:

http://en.kingofsat.net/find.php?question=jsc&Submit=Zap

[mr. floppy]

@all
Mil12 works with newcs1.67+mbox 004.23, all HD channels are opened (didn't try penthouse hd, i'll try tonight when it begins to broadcast)

how must be the settings in newcs to get it work?

[zed44]

hi
for a dreambox with internal reader, here comes my settings

<device>
<name>lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

in cwshare.cfg

C: { 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 05002820:05032820;0500F430:05023800;0500 4400:05024400;05020810:05000810;05001110 :05021110;05000B00:05030B00 }

mapping not full for the moment, SRG, JSC and Bis not recognized, but i work on it and try to put full mapping when it will wotk for both prov on the card

regards

[mr. floppy]

thanks. works fine with cccam2.1.4/newcs in internal slot. but how to config to get in smargo working?

[zed44]

@mr floppy

for smargo, in newcs.xml, try to replace the beginning of the file with that :

<newCSconfig>
<readers name="Smargo">
<device>
<name>Phoenix Interface</name>
<type>smartreader+</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 00000000 00 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 00000000000</ipk>
<ucpk>0000000000000000000000000000000000 00000000 00 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 0000000000000000000000000000000000000000 0000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>14000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

and in cline replace port 34000 by 14000

other settings should be the same that in the post i wrote.
please tell us if it works for other member to adopt the solution, i've not tested by myself

regards

[devilboy855]

Now Works

with cccam 2.1.4 newcs 1.67 on DM 800
newcs.xml
cccam.cfg

N: 127.0.0.1 34003 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[mr. floppy]

<node>/dev/ttyUSB0</node>

at the moment the millenium is in:
card reader /dev/usb/tts/3
handled 0(0) ecms and 0(0) emms
Viaccess card

so what are the settings for this? and have i to disable the smargo in cccam.cfg to use it with newcs? like this?
SERIAL READER : /dev/usb/tts/0 infinity
SERIAL READER : /dev/usb/tts/1 infinity
SERIAL READER : /dev/usb/tts/2 infinity
#SERIAL READER : /dev/usb/tts/3 smartreader+
SERIAL READER : /dev/usb/tts/4 smartreader+
SERIAL READER : /dev/usb/tts/5 smartreader+
SERIAL READER : /dev/usb/tts/6 smartreader+
SERIAL READER : /dev/usb/tts/7 smartreader+

[zed44]

@mr floppy

sorry i can't help on cccam.cfg as i don't know at all cccam

try to ask on cccam section to see if someone has the answer

regards

[dadjadja]

all hd channels not work for me I run dreambox 8000 with cccam 2.1.4 internal slot, I mean hd channel with provider 32820 but work with TNT provider tf1 f2 m6