Dragon Cam Tools

[Trinity]

how to repair your DRAGON CAM which is not initiallizing, using
CAS INTERFACE 2 & ADD ON !

Enjoy TRIN

[Trinity]

CIW Loader Dragon 1.2
(by @lembu)

Serial Loader for Dragon Cam.

What's new
----------
1-FAKE or Real File detection.
If FAKE file detected button WRITE will be disabled and red smiley appear
(impossible to prog fake file).
2-PIC based card programming added (16f84+2MB eeprom)
3-Com Port Auto Detection option added.
4-Erasing Card option added.
5-"How to" button added. Describe all functions and procedures.
6-"Select Skins" option added. Change application apparence
7-Serial settings save in DCSettings directory when you close Serial Loader

HOW TO
------
Basic procedure:
1-Load File (Firmware DRA File extension)
2-Check PIC16f84 for Pic Based card loader
3-Select COM Port
4-Clic on WRITE Button

Advanced procedure:
1-Load File (Firmware DRA File extension)
2-Check PIC16f84 for Pic Based card loader
3-Optional:
Check Erase card before if you want erase card just before programming card
4-Check Autodetect COM PORT to use Port higher at COM4
or to detect real port in your machine
5-Select COM Port
6-Clic on WRITE Button

When you leave loader, settings will be saved in DCSettings directory.

ENJOY TRIN

[PAN]

DragonCam Patcher v0.9

[PAN]

CIW Loader Dragon 1.2
(C)MASARE Team - Saoud007

Serial Loader for Dragon Cam.

What's new
1-FAKE or Real File detection.
If FAKE file detected button WRITE will be disabled and red smiley appear
(impossible to prog fake file).
2-PIC based card programming added (16f84+2MB eeprom)
3-Com Port Auto Detection option added.
4-Erasing Card option added.
5-"How to" button added. Describe all functions and procedures.
6-"Select Skins" option added. Change application apparence
7-Serial settings save in DCSettings directory when you close Serial Loader

HOW TO
Basic procedure:
1-Load File (Firmware DRA File extension)
2-Check PIC16f84 for Pic Based card loader
3-Select COM Port
4-Clic on WRITE Button

Advanced procedure:
1-Load File (Firmware DRA File extension)
2-Check PIC16f84 for Pic Based card loader
3-Optional:
Check Erase card before if you want erase card just before programming card
4-Check Autodetect COM PORT to use Port higher at COM4
or to detect real port in your machine
5-Select COM Port
6-Clic on WRITE Button

When you leave loader, settings will be saved in DCSettings directory.

Enjoy.

[watergate]

TPS key generator for update your new aes keys by remote in the debug section.

[passete]

Dragon tools keys switcher .
Hex to Dec, Dec to Hex :

Thanks to the Dragon Team !

[passete]

Here the latest dragoncrypt tool :

a big thanks to JKF team

And MASARE team !

KEYS EDITOR FOR DRAGON CAM MODULE (ALL in ONE: no external tools needed)


Supported versions
Predator 215 to last firmware


PENTA Version 1.08:
- Added CAIDs module updater (menu File -> CAIDs work like DragonCrypt CAIDs Updater)
New file CAIDs.txt created in folder DCFileKeys with all infos on it (Filename, number of caids, caids datas)
SaveAS function added
- Languages files Updated

- Cryptoworks keys: Added autodetect for master ident
- Added Cryptoworks Idents in file Idents_List.txt
- Added Idents list box infos in Cryptoworks managment keys
- Added 'Table Used' info in DRA_KEYS.txt & Idents_List.txt

- Added Polish language Thanx to author for translation
- Added CryptoWork Key managment
- Fixed irdeto ident in treeview, Dra File & Idents_List
- New Tables added: Predator341.TBL,Predator341Bis.TBL,
Predator342.TBL,Predator342Bis.TBL


How to enter CryptoWorks keys in DragonCrypt:
1-Load Your DRA File & Table (Predator342.TBL)
2-Select Cryptoworks system crypt
3-Select ident 0DXX-CW, key window appear
4-Enter ident or sub ident like give in dec key converted to hex (example: 03C1)
5-Enter key number (example 01)
6-Enter key Value (example 1F CF 51 D1 87 24 FE 8D)
7-Press Update button

You have entered : [03C1] [01] [1F CF 51 D1 87 24 FE 8D key] of 12/05 update yur cam it will work now

NOTA:Press Read button if you want to get key value before update or after update


Items added in language file:
[Captions]
TDragonCryptFormCaids.Label1=CAIDs Datas~!@#$
TDragonCryptFormCaids.Label2=CAIDs Infos~!@#$
TDragonCryptFichePrincipale.CryptoWorksR eadKey=Read~!@#$
TDragonCryptFichePrincipale.CryptoWorksW riteKey=Write~!@#$

[Hints]
TDragonCryptFormCaids.CaidList=Select Caid~!@#$
TDragonCryptFormCaids.CaidMaskEdit=Edit/Modify CAIDs~!@#$
TDragonCryptFormCaids.LoadTable=Load CAIDs Table~!@#$
TDragonCryptFormCaids.LoadDraFile=Load Predator Firmware~!@#$
TDragonCryptFormCaids.SaveDraFile=Save Predator Firmware~!@#$
TDragonCryptFichePrincipale.CryptoWorksC aids=CAID~!@#$
TDragonCryptFichePrincipale.CryptoWorksI dentSelected=Ident Selected~!@#$
TDragonCryptFichePrincipale.CryptoWorksI dent=Ident Number~!@#$
TDragonCryptFichePrincipale.CryptoWorksK eyNum=Select Key~!@#$
TDragonCryptFichePrincipale.CryptoWorksI dentList=Idents Infos~!@#$
TDragonCryptFichePrincipale.CryptoWorksK eyVal=Enter Key~!@#$
TDragonCryptFichePrincipale.CryptoWorksR eadKey=Read Key~!@#$
TDragonCryptFichePrincipale.CryptoWorksW riteKey=Write Key~!@#$


Main Functions:
-Keys: edit, modify, clear
-Idents: add, clear, move
-Key Concerter -> HEX/DEC format supported & vice versa (default len key=16)
-Export keys:
DRA_KEYS.TXT -> keys in hex/dec
Softcam.key -> softcam based format
Keys_Updated.txt -> All new keys updated in hex/dec format
Idents_List.txt -> All idents present in firmware by system crypt
-Import keys from: Softcam.key, DRA_KEYS.TXT, FuN6in1
irdeto keys not available in import with softcam -> 00 is not an ident
and import by Ident name not sure a 100% -> if you replace ident name completely function cannot import keys
-Firmware checker: all file checked before loading
You can use this function to certifiate ORIGINAL firmware or verify DragonCrypt Patch (DragonCrypt.ids certificate file)
-Funcard producer: HEX & BIN format supported
-Files Repair: Loader file for PIC & FUn7 cards
-Serial Dragon Loader: FuN7 & PIC Based cards, com port autodetection, card erase...
-DROP File function:
DRA file in main window
DRA File in Dragon Serial Loader
DRA File in Funcard Producer
DRA File in Firmware Checker
SoftCam.key File in Edit Softcam
SoftCam.key, DRA_KEYS.TXT, EEprom6in1.hex in import form
Report to HOW TO text file for more details.


Default Directories
- DCDra -> Store Dragon Firmware
- DCThemes -> Themes apparences for application
- DCFuncard -> Store funcard produce
- DCLanguages -> Store multi language support files
- DCFileKeys -> SaveAS: *.BIN, *.DRA
DRA_KEYS.TXT, IDENTS_LIST.TXT, DRA_KEYS to SOFTCAM.KEY, SOFTCAM.KEY to DRA_KEYS,
KEYS_UPDATED.
Destination Directory will be open after file creation by the application
Directory automatiquely created if not exist.
- DCRepairFile -> PIC/FunFlash
Destination Directory will be open after file creation by the application
Directory automatiquely created if not exist.
- DCDatas -> Idents Table
- DCTables -> Firmwares Table
- DCSettings -> Serial loader settings (Com port, port auto detection, Erase card, PIC Based card)
Predator Table used by default
- DCids -> Original Version and patched version checked.
- DCTutorials -> All documentation about DragonCrypt Or DragonCam. PDF file format.


FAKE FILE:
Impossible to load Fake File (Check Firmware)
Impossible to Create Funcard from Fake File (Check Firmware)
Impossible to Programming Dragon Card Loader with Fake File (Check Firmware)
100% Secure and Safe.


Language Files include:
01-Albanian
02-Arabic
03-Bulgarian
04-Croatian
05-Deutch
06-English
07-French
08-German
09-Hungarian
10-Italian
11-Polish
12-Portugues
13-Spanish
14-Turkish

Use SIL Editor in DragonCrypt-Language Editor to create new language.
SPECIAL THANK'S TO ALL GUYS FOR TRANSLATION


Multi-Themes:
Differents themes to changes application apparence.


Tools written for Dragon Cam:-DragonCrypt Keys Editor
-CIW Loader Dragon 1.2
-DragonCrypt CAIDs Updater

[naghali]

i fundet her is for repear loder kort til evrey one

[bab.elouad.cite]

Predator editor Absat.zip

[antrag]

DRagonCrypt 110 by HN

Good Fun