Millenium Card Programming problem

[st4b]

Hi,

I`ve bought a Millenium Plus Euro Card from kiwi europe ltd. so it can`t be a fake :) but I couldn`t manage to program it. I am using a Master crd2 programmer and the Millennium Card Loader v 1.0.2.

this error message appears on each try to program it: No ATR from card

could it be the programmer I`m using ? do I need a certain programmer ? which programmer do you guys use ?

thanks.

[mr. floppy]

im using cas3+. no problem at all. just set the cas in phoenix-mode 3,579mhz and then start millenium loader.

[satpat]

Im Using Cas3 for phoenix mode 3.579 and
Loader Mill connect => click no card reader..and port com..


OK for card=>Satkiwi only Mill.original

[st4b]

mhh, tried it with cas3 + phoenix @ 3.579 still the same error.

[Grizou0]

some time, carss is a no correct atr: 3B FF E0 9000 for exemple.
Loader is ok only with correct atr.
If your millenium card give you a bad or fake atr, card is out. -> Return to seller.

[wikisat]

mhh, tried it with cas3 + phoenix @ 3.579 still the same error.

you need to use both serial and usb cables when in phoenix mode, set on fast mode.

[Zyknyp]

Can you program it with an old-style Serial phoenix/Smartmouse (not USB that is?)

[unkletom]

I still have my Mr PCB Maximus Multiprogrammer (v.1.04) from when I used a Funcard with my Hummy. Any idea if I can use it to program a Millennium Plus Card?

Tom

[Didden]

i have a big problem

my millenium card don't work anymore.
i can not flash it anymore.

he keeps resseting the card.

greetz

[Cyb3rc0m]

i have a big problem

my millenium card don't work anymore.
i can not flash it anymore.

he keeps resseting the card.

greetz

+details , to can help you, (configuration that you use ....)
programmer/connectics...