Opticum X402p & 403p firmware last upt.

[bluebottle]

Please note that the latest software's 1.4.0 will erase your channels list and are not compatible with existing channel lists. If you use these software's then you will need to rescan your satellites.
This is a pity as the menu styles are excellent and the clearest I've seen so far, if you are going to try the software then back up all your old settings first that way you can reinstall them if wish.

[muholdvadasz]

Please note that the latest software's 1.4.0 will erase your channels list and are not compatible with existing channel lists. If you use these software's then you will need to rescan your satellites.
This is a pity as the menu styles are excellent and the clearest I've seen so far, if you are going to try the software then back up all your old settings first that way you can reinstall them if wish.

With 1.3.87 channel list NO PROBLEM. But still "record bug" :( /1. press OK, 2. press RED (for group) and NO GROUP, but start recording :( /

[aqua39]

Firmware looks and works fine but one thing make it unusable. When I press left arrow to volume down, screen become black and tuner don't respond. Is any solution on this fault?

[dreamer1983]

The Remote Controll(FB) are fixed from FFTEam
the keys are fixed from dreamer1983

New sw 1.4.06

You need to download the software and channel list by the "All SW + Bootloader" mode. 
(The current channel list will be removed and replaced by the channel list of Canal Digitaal, Astra1, Astra2, Astar3, Hotbird, Turksat). 
1- Audio/video synchronous problem is solved. 
2- EPG problem is fixed. 
3- Channel list problem is fixed. 
4- Language setting menu is added after factory reset (with countries flags). 
5- Bold letter type for menu.

[amebasu]

The Remote Controll(FB) are fixed from FFTEam
the keys are fixed from dreamer1983

New sw 1.4.06

You need to download the software and channel list by the "All SW + Bootloader" mode. 
(The current channel list will be removed and replaced by the channel list of Canal Digitaal, Astra1, Astra2, Astar3, Hotbird, Turksat). 
1- Audio/video synchronous problem is solved. 
2- EPG problem is fixed. 
3- Channel list problem is fixed. 
4- Language setting menu is added after factory reset (with countries flags). 
5- Bold letter type for menu.

This firmware, have serious bug with audio up & down, with sorting channel list....
Very bad...

[dıgı]

14.07.2011

Software Opticum X4

new sw 1.3.93

[dreamer1983]

New Firmware ILTv Menu ver 1.3.93
The remote are fixed from FFTeam
the keys are fixed from dreamer1983
------------------------------------------------------
- neuer Videotreiber
- V13 Karte geht 
- neuer Bootloader 1.1.6 (also MIT Bootloader einspielen wenn noch ein alter vorhanden)
- wer neuen Bootloader mit eingespielt hat kann seine Senderliste einspielen
- Senderliste mit Boot 1.1.5 sind voll kompatibel
- Multifeed = Info + 0 oder grüne Taste
-spielt DVR,MP3,MP2,MP1,JPG,BMP,OGG,WAV,FLAC,MKV, MP4, MOV, AVI, MPG, MPEG, VOB, DAT, TS, TRP, m2ts, m2t, tp
- kein Divx, XVid (hinweis dazu wurde eingefügt falls so eine Datei versucht wird abzuspielen)
-Senderlisten untereinander kompatibel: ILTV, Truman,Xwindow, Synaps und Lemontree
-einspielen einfach per Usb oder RS232

ACHTUNG 2 mal alte FB drinne 1 mal Orginal,einmal auf ILTV angepast bitte mal testen ob 1 oder 2 besser ist
neue FB auch drinne
=======================
- New video driver
- V13 card goes
- New boot loader 1.1.6 (ie import WITH bootloader if there exists an old)
- Who has recorded with new bootloader can import its list of channels
- Channel List 1.1.5 are fully compatible with boat
- Multi Feed = Info + 0 or green button
DVR-plays, MP3, MP2, MP1, JPG, BMP, OGG, WAV, FLAC, MKV, MP4, MOV, AVI, MPG, MPEG, VOB, DAT, TS, TRP, m2ts, m2t, tp
- No DivX, XVid (note this was added if such a file will try to play)
Station lists compatible with each other: ILTV, Truman, Xwindow, and Synaps Lemontree
-import via USB or RS232

[so_ang]

New Firmware ILTv Menu ver 1.3.93
The remote are fixed from FFTeam
the keys are fixed from dreamer1983
------------------------------------------------------
- neuer Videotreiber
- V13 Karte geht 
- neuer Bootloader 1.1.6 (also MIT Bootloader einspielen wenn noch ein alter vorhanden)
- wer neuen Bootloader mit eingespielt hat kann seine Senderliste einspielen
- Senderliste mit Boot 1.1.5 sind voll kompatibel
- Multifeed = Info + 0 oder grüne Taste
-spielt DVR,MP3,MP2,MP1,JPG,BMP,OGG,WAV,FLAC,MKV, MP4, MOV, AVI, MPG, MPEG, VOB, DAT, TS, TRP, m2ts, m2t, tp
- kein Divx, XVid (hinweis dazu wurde eingefügt falls so eine Datei versucht wird abzuspielen)
-Senderlisten untereinander kompatibel: ILTV, Truman,Xwindow, Synaps und Lemontree
-einspielen einfach per Usb oder RS232

ACHTUNG 2 mal alte FB drinne 1 mal Orginal,einmal auf ILTV angepast bitte mal testen ob 1 oder 2 besser ist
neue FB auch drinne
=======================
- New video driver
- V13 card goes
- New boot loader 1.1.6 (ie import WITH bootloader if there exists an old)
- Who has recorded with new bootloader can import its list of channels
- Channel List 1.1.5 are fully compatible with boat
- Multi Feed = Info + 0 or green button
DVR-plays, MP3, MP2, MP1, JPG, BMP, OGG, WAV, FLAC, MKV, MP4, MOV, AVI, MPG, MPEG, VOB, DAT, TS, TRP, m2ts, m2t, tp
- No DivX, XVid (note this was added if such a file will try to play)
Station lists compatible with each other: ILTV, Truman, Xwindow, and Synaps Lemontree
-import via USB or RS232

ALL cnt use wth mt Remote T_T

[tom_1999]

Firmware works great for me, except that I can't use the multifeed!
When I hit the green button I can see the option of selecting different channels, when I choose a different channel though, nothing happens. Is there a solution?

[*Besmiri*]

Opticum HD X403p /amstar_1.4.05

HD Sender laufen stabiler und Verzerren nicht