to idio minima
to idio minima
Το ίδιο μου έκανε και εμένα ένα 500 γνήσιο με τα dreamup το 1.3.3.3 - 1.3.3.6 (με το ίδιο μήνυμα με διαφορετικά image) μόνο με το 1.3.3.0 μου το φλάσαρε.
εμένα βέβαια το Avira μου έβγαζε ότι αυτά το 3 dreamup έχουν malware αλλά τα τσέκαρα και με άλλο a/virus και τα βρήκαν καθαρά.
Allazei to password sto dreambox?vazw sto dcc root password kanei sundesh ok alla den kanei login.profanos exoun allaksei to password.pws mporw na dw ta arxeia tou dm?uparxei allos tropos?
Kalimera se olous.
Apo xtes den leitourgei to remote control apo to maimoudaki DB 500s.Koita3a mesw camera kinitou kai paratirisa oti i desmi fwtos apo to xeiristirio paramenei anoixti (den kleinei otan afinw to koumpi).To anoi3a, to ka8arisa alla pali ta idia.
To remote ta epai3e i to mataki toy dekti?Poia i gnwmi sas?
file HOBSAT efxaristo. eixes dikio me to dreamup 1.3.3.0.flasare to image.Tora prepi fisika na kano kapies rithmisis h den xriazete,kathe dinati woithia dekti kai pali
EFXARISTO.
μια επισημανση μονο root - dreambox ειναι το username - password στα dream ...
What you need to update the firmware:
You need a current image. Such an image for the DM 500HD has the extension *. NFI.
It is not possible einzuspielen another image type such as *. IMG!
Do not try it please, it does not work.
You still need a DHCP server on your network, an intact bootloader
You need a browser and a network cable. Connect your Dreambox to your
Switch / hub / router.
To import a new image to the Dreambox, you must have the "2nd stage" Loader
in place and undamaged.
The next steps refer to a network with a DHCP server running.
- Turn off the dreambox, use this switch back in the pits. The
Standby is not enough!
* (1.) Press the button on the front panel and hold it down.
* (2.) Turn on the Dreambox via the switch on the back of housing a
* (3.) your Dreambox now get the next free DHCP IP address from your router.
- Now, open a browser on your PC.
(1.) Enter the IP address in the address field of the browser "http://ip/" field.
- (2.) Now press the pick "firmware upgrade" of the displayed page in
Browser.
- On the next page, you can now select the desired image you
dubbing in the box like. Please note the file extension *. nfi that
dub
other images is not possible (NO *. img)!
- Click on the selection of the images on the selection of "FLASH!" and wait
please
completely transferred to the image was flashed.
- Turn up the whole box, and then ask then on again.
The new operating software should now be recorded and boot.
First disconnect the box from main power
start the program "DreamUP
select your comport
maybe use network
if network: enter the local IP from your PC, enter a remote IP for your Box
press the "Connect" - button
and then connect the box to main power
please wait now
after the flash loader is transfered into the Box select the firmware by pressing
the "Flash" - button
select the firmware and click "open"
upload starts now, please wait
Box is flashing the new firmware into the flash memory, please wait
flashing done, press "OK"
press "disconnect then exit"
restart the box