Kush me thote per karten e tring cfare ndryshimi duhet bere ne cccam.cfg? une perdor dm500s me gemini 4.7 cccam 2.1.3/NewCS1.67 dhe kam nje karte tring te mbushur.
Kush me thote per karten e tring cfare ndryshimi duhet bere ne cccam.cfg? une perdor dm500s me gemini 4.7 cccam 2.1.3/NewCS1.67 dhe kam nje karte tring te mbushur.
pershendetje missoervinOriginally Posted by missoervin
shiko nje her < ketu>
Rrofsh oves12 e kam pare ate teme por eshte per linux pc mua me duhet per dm500 cccam/newcs dhe kam pershtypjen qe konfigurimi behet ne cccam.cfg.
Me dm 800 hd e lexon Cccam/Newcs karten tring. ndersa per 500s nuk e di se nuk e kam.
mbase ndonje ketu mund te ndihmoj.
I ke bere ndonje konfigurim apo thejesht e ke instaluar dhe ke vendosur karten ne fole. Nese ke bere ndonje ndryshim me thuaj se me intereson dhe per E2.
duhet te shikosh configun e newcs.xml .
Po se ke bezdi ma posto pak newcs.xml tend ta shikoj
OoZooN-Image-dm8000-3.0.3
[SIZE=]•OoZooN-Image-dm8000-3.0.3.nfi[/SIZE]
•here comes my latest dm8000 Image from Enigma² "release 3.0" OE 1.6 branch.
•Enigma is of 16.12.2010
•the plugins are of 13.12.2010
•the drivers are of 15.12.2010
•new kernel 2.6.18-r7.0
•secondstage is 76
•changes at Enigma² can be pursued
•my changes at oe:
•own bootlogos, artwork by clumsy and BVB01
•with satellites.xml - enigma² by Reinhrd
•changes of dccamd start
•dccamd not included in image, can be installed via plugin download
•(*) included
•(**) only via plugin-download available
•systemplugins:
•automatictimerlistcleanup (**)
•automaticvolumeadjustment (**)
•autoresolution (**)
•cleanupwizard (**)
•crashlogautosubmit (**)
•crossepg (**)
•defaultservicesscanner (**)
•diseqctester (**)
•dvbtime (**)
•hotplug (*)
•ledmanager (**)
•networkbrowser (*)
•networkwizard (*)
•positionersetup (*)
•satelliteequipmentcontrol (**)
•satfinder (*)
•setpasswd (**)
•skinselector (*)
•softwaremanager (*)
•startupservice (**)
•videoenhancement (**)
•videomode (*)
•videotune (*)
•wirelesslan (**)
•plugins:
•aihdcontroller (**)
•ambx (**)
•antiscrollbar (**)
•appletrailer (**)
•audiosync (*)
•autotimer (**)
•autotimeshift (**)
•b00k (**)
•babelzapper (**)
•barryallen (**)
•bartallen (**)
•blockcontent (**)
•bonjour (**)
•buliticker (**)
•bwmon (**)
•captain-shell (**)
•cdinfo (**)
•cooltvguide (**)
•covermanager (**)
•cronmanager (**)
•cutlisteditor (**)
•cvsnews (**)
•dccamd (**)
•dflash (*)
•djmount (**)
•dmvidsdirect (**)
•dreamexplorer (**)
•dreamirc (**)
•dvdbackup (**)
•dvdburn (**)
•dvdcontroller (**)
•dvdplayer (**)
•dyndns (**)
•easymedia (**)
•emailclient (**)
•epgrefresh (*)
•epgsearch (**)
•extendedserviceinfo (**)
•fantastic (**)
•filebrowser (**)
•flashcheck (**)
•freeze (**)
•fritzcall (**)
•ftpbrowser (**)
•genuinedreambox (*)
•googlemaps (**)
•gp2flashbackup (**)
•graphmultiepg (*)
•growlee (**)
•hddtemp (**)
•hdmon (**)
•housekeeping (**)
•httpproxy (**)
•imdb (*)
•iprec (**)
•kiddytimer (**)
•lastfm (*)
•lcdskin (**)
•ledctl (**)
•letterbox (**)
•livescore (**)
•logomanager (**)
•lottoextended (**)
•lottozahlen (**)
•mediacenter (**)
•mediadownloader (**)
•mediaplayer (*)
•mediascanner (*)
•merlinepg (**)
•merlinepgsearch (**)
•merlinmusicplayer (*)
•metacafedirect (*)
•meteoitalia (**)
•modem (*)
•mosaic (**)
•mountie (**)
•mountie-light (**)
•moviecut (*)
•moviejukebox (**)
•movielistpreview (**)
•movieplayer (**)
•movieretitle (*)
•movieselectionquickbutton (**)
•movie-splitter (**)
•movietagger (*)
•multquickbutton (**)
•multirc (**)
•mytube (**)
•netcaster (**)
•nfsserver (*)
•ofdb (*)
•off (**)
•openpanel (**)
•orfat (**)
•orfteletext (**)
•partnerbox (**)
•passwordchanger (**)
•pauli (**)
•permanentclock (**)
•permanentrecording (**)
•permanenttimeshift (**)
•pictureplayer (*)
•pluginlist (**)
•podcast (**)
•puremp3player (**)
•pzyemail (**)
•quickbutton (**)
•quicktv (**)
•reconstructapsc (**)
•remotetimer (**)
•remotetv (**)
•rsdownloader (**)
•sambaserver (*)
•screensaver (**)
•secondinfobar (**)
•seekbar (**)
•sherlock (**)
•shoutcast (*)
•simplerss (**)
•smargo (**)
•socketmmi (**)
•spinnerselektor (**)
•sportinfos (**)
•startuptostandby (**)
•suduko (**)
•suomipoeka (**)
•swapscript (**)
•tageditor (*)
•timeshiftsave (**)
•timeupdate (**)
•trafficinfo (**)
•translator (**)
•tuxcom (**)
•tuxcom (**)
•tversity (**)
•unwetterinfo (**)
•updatecheck (*)
•upnp (**)
•userscripts (*)
•ushare (**)
•valixdcontrol (**)
•virtualzap (**)
•vlcplayer (**)
•wallywest (**)
•wetherplugin (**)
•wethersat (**)
•webbrowser (**)
•webcamviewer (**)
•webinterface (*)
•webradiofs (**)
•werbezapper (**)
•xmltvimport (**)
•youtubeplayer (**)
•zaphistorybrowser (**)
•zapstatistic (**)
•zdfmediathek (**)
•Skins:
•basic hd (**)
•blackbox (**)
•blueline (**)
•blueline.extended (**)
•blueline.single (**)
•brushed alu hd (**)
•chromeline (**)
•chromeline.cobolt (**)
•dmconcinnity-hd (**)
•dmm-hd (**)
•dreammm-hd (**)
•dreamtv-hd (**)
•dtv-hd (**)
•dtv-hd-reloaded (**)
•elgato-hd (**)
•flatline (**)
•flatline.blue (**)
•glassline (**)
•greenline (**)
•greenline.extended (**)
•greenline.single (**)
•greyline (**)
•greyline.extended (**)
•greyline.single (**)
•kerni-hd1 (**)
•kerni-hd1r2 (**)
•lt6-hd (**)
•shadowline (**)
•simple (**)
•swain (**)
•swain.hd (*)
•ultraviolet (**)
•vali.hd (**)
•vali.hd.nano (**)
•vali.hd.warp (**)
•vali.xd (**)
•yads.hd (**)
•picon 01.0e 3d hd (**)
•picon 04.0e 3d (**)
•picon 04.8e 3d hd (**)
•picon 07.0e 3d (**)
•picon 07.0e 3d hd (**)
•picon 09.0e 3d (**)
•picon 09.0e 3d hd (**)
•picon 13.0e 3d (**)
•picon 13.0e 3d hd (**)
•picon 16.0e 3d (**)
•picon 16.0e 3d hd (**)
•picon 19.0e 3d (**)
•picon 19.2e 3d hd (**)
•picon 23.5e 3d (**)
•picon 23.5e 3d hd (**)
•picon 28.2e 3d (**)
•picon 28.2e 3d hd (**)
•picon 39.0e 3d (**)
•picon 39.0e 3d hd (**)
•picon 42.0e 3d (**)
•picon 42.0e 3d hd (**)
•picon kd.3d (**)
•picon kd.3d.hd (**)
•picon um.3d (**)
•picon um 3d hd (**)
•my changes at enigma:
•MHW epg active
•load patch for crossepg
•bouquet button patch
•.recordings patch
•authenticity certificate check (by Dr.Best) <- this image will only work on original dmm hardware!
•this image is updateble via plugins -> softwareupdate over internet!
•OE Build Configuration:
•BB_VERSION = "1.8-dream"
•TARGET_ARCH = "mipsel"
•TARGET_OS = "linux"
•MACHINE = "dm8000"
•DISTRO = "opendreambox"
•DISTRO_VERSION = "1.6.0"
•TARGET_FPU = "soft"
missoervin nqs do me shum shiko ne pm.
newcs.xml should contain this
<newCSconfig>
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="Dreambox SCI">
<device>
<name>SCI Upper Slot</name>
<type>sci</type>
<mhz>368</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<pincode>1234</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>Tringcard</name>
<password>Tringcard</password>
<au>off</au>
<spider>off</spider>
<sidoverride>on</sidoverride>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>No</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
I have set that it only read from one card reader you might have cccam reading from other readers. The
N line in CCcam is
N: 127.0.0.1 34001 Tringcard Tringcard 01 02 03 04 05 06 07 08 09 10 11 12 13 14
It works
Start-up script is
#!/bin/sh
########################################
###### Powered by The Gemini Team ######
### http://www.i-have-a-dreambox.com ###
########################################
# camid #
# 0000 = Commom Interface #
# 0001->0099 = for User Experiment #
# 0177 = Rq-Echo-Client #
# 0178 = RqCS #
# 0179 = RqCamd #
# 0189 = OpenCam #
# 0199 = Dccamd #
# 0200->0299 = Fbiss #
# 0300->0399 = Camd3 #
# 0400->0499 = Camx #
# 0500->0599 = Camx-Radegast-CS #
# 0600->0699 = Evocamd -OLD #
# 0700->0799 = Evocamd_ronlad_cs -OLD #
# 0800->0899 = Mgcamd -OLD #
# 0900->0999 = Mgcamd_ronald_cs -OLD #
# 1000->1099 = Newcamd -OLD #
# 1100->1199 = Newcamd-ronald_CS -OLD #
# 1200->1299 = Newcamd-spider -OLD #
# 1300->1399 = Radegast #
# 1400->1499 = Ronald-CS #
# 1500->1599 = Scam #
# 1600->1699 = Scam-Ronald-CS #
# 1700->1799 = OSCam #
# 1800->1899 = NewCS #
# 2000->2099 = Camd3 #
# 2300->2399 = Camd3-NewCS #
# 2600->2699 = Camd3-MPCardserver #
# 3000->3099 = Evocamd #
# 3100->3199 = Evocamd-Ronald-CS #
# 3200->3299 = Evocamd-NewCS #
# 3300->3399 = Evocamd-MPCardserver #
# 4000->4099 = Mgcamd #
# 4100->4199 = Mgcamd-Ronald-CS #
# 4200->4299 = Mgcamd-NewCS #
# 4300->4399 = Mgcamd-OSCam #
# 5000->5099 = Newcamd-Betad #
# 5100->5199 = Newcamd-Cardserver #
# 5200->5299 = Newcamd-Spider #
# 5300->5399 = Newcamd-NewCS #
# 5400->5499 = Newcamd-OSCam #
# 6000->6099 = CCcam #
# 6100->6199 = CCcam-Capmtserver #
# 6200->6299 = CCcam-NewCS #
# 6300->6399 = CCcam-OSCam #
# 7000->7099 = Mbox #
# 7100->7199 = Mbox-NewCS #
# 9500->9599 = reserved #
# 9600->9699 = reserved #
# 9700->9799 = reserved #
# 9800->9899 = reserved #
# 9900->9999 = reserved #
########################################
CAMD_ID=6293
CAMD_NAME="CCcam 2.1.4/NewCS 1.67"
CAMD_BIN=CCcam_2.1.4
CAMD_CS_SRV_BIN=newcs_1.67
INFOFILE_A=ecm0.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0
########################################
logger $0 $1
echo $0 $1
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
remove_tmp
/usr/bin/$CAMD_CS_SRV_BIN &
sleep 15
/usr/bin/$CAMD_BIN &
;;
stop)
killall -9 $CAMD_CS_SRV_BIN $CAMD_BIN 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
Ndersa kete e gjeta ne nje vend tjeter.
kjo esht per 500s nuk e di nese e lexon karten e tringut.
<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>digital</name>
<password>digital</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.0.100</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>elite</name>
<password>board</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
Posting Permissions
