Advertise Here
Advertise Here
Advertise Here
Advertise Here
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Back Up Vu+ Solo Images

  1. #21
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Vti 4.0 backup @isayuksel Vu Solo

    Code:
    Neues VTi "Vu + Team Image" - V 4.0 Backup image of Vu solo @ isayuksel
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings
    
    Quote:
    
    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.
    DHCP on the network.
    
    Where You can call this channel channel list or we can install ready.
    
    (4) Vu + Duo channel search and bookmark create
    
    4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    December 12, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. @ Kayacan
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Menu => Add-ons section of the press came and Kumandamızın Green (Download Plug-ins) is pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a while, "downloadable add-ons" will be listed in the categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Do you want to download any plug-in "..... When you select a plug-in? " A warning will come in the form of knowledge. Here, a "yes" is selected while still accommodating kumandamızın "OK" button to add the establishment can be downloaded. [/ B]
    
    Quote:
    
    Downloadable add-ons => extensions under the "bitrateviewer" was established
    Downloadable add-ons => extensions under the "cccaminfo" was established.
    Downloadable add-ons => extensions under the "enhancedmoviecenter" was established
    Downloadable add-ons => extensions under the "MyTube" was established.
    Downloadable add-ons => extensions under the "openwebif" was established.
    Downloadable add-ons => extensions under the "permanentclock" was established.
    Downloadable add-ons => extensions under the "pzyemail" was established.
    Downloadable add-ons => extensions under the "sherlock-vuplus" was established.
    Downloadable add-ons => extensions under the "showclock" was established. exit, press the key long-term.
    Downloadable add-ons => extensions under the "simplerss" was established. Is not active.
    Downloadable add-ons => extensions under the "virtualzap" was established.
    Downloadable add-ons => extensions under the "vlcplayer" was established.
    Downloadable add-ons => extensions under the "weatherplugin" was established. Istanbul is set up.
    Downloadable add-ons => extensions under the "youtubeplayer" was established
    Downloadable add-ons => systemplugins under the "positionersetup" was established.
    Downloadable add-ons => systemplugins under the "Satfinder" was established.
    Downloadable add-ons => systemplugins under the "setpsswd" was established. The password is assigned.
    Downloadable add-ons => systemplugins under the "startupservice" was established. Channel D is set
    Downloadable add-ons => cccam2.3.0 was established under the cams.
    Downloadable add-ons => CCcam config was founded under.
    
    I suggest you to restart your device after installing plug-ins.
    
    Determination of the initial channel:
    
    Quote:
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down options, press the OK button on your remote control set-point as the stratup service.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    
    Quote:
    
    Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory after a workout, press the blue drop-down menu on your remote control, point the installer manually. Install ipkg option, it can point to press the OK button on your remote control.
    
    Quote:
    
    Turkuazpanel_0.3.3_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    r0_beta2 buyukbangpanel_1.1-founded.
    
    Quote:
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    Menu => Plugins => tunisiasat manager_3.0 e-addons-plugins-come first under the sport livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" was founded. netradioturk-stations_2.7 updated.
    
    Emu are doing the installation:
    
    CCcam 2.3.0 downloadable add-ons, has been established.
    
    Note: CCcam.cfg file path / etc dir. Here editleyebilirsiniz information about the server.
    
    1:37 Mgcamd setup:
    
    Mgcamd_1_37.tar.gz file download / tmp folder are sending. By pressing the blue button Kumandamızın Table nu open VTI. We press the OK button, point to the installation manual kumandamızın here. . Tar.gz download kumandamızın the OK button is pressed again, come on. In this way we do our installation.
    
    key establishment and key update installer we also deal with:
    
    Quote:
    
    Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
    To set up Hacksat telnette
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    Kurulumlarımızı our config and do the other.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 placed in the directory should be submitted.
    
    Quote:
    
    Picon Turksat Eutelsat w3 sets installed.
    
    You can try different skins according to your request: VU + Duo Twin Linux HDTV Skin Archive
    
    
    Quote:
    
    enigma2-skin-hdglass16_4.01 interface is established.
    
    If we want to upload the site by installing any Backup dosyamızı open sharing.













    Important Note:

    Backup file before installing the first (if you have not done before installation) bootloder need to update the process. This process also imajdan be installed prior to a one-off.

    After removing the image to download and install zipten solo_cfe_2.0_usb.zip file for this, such as making the installation process.

    Easy come.

    Download

  2. Advertise Here
  3. #22
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Official Image Backup @ isayuksel Wu solo 29/12/2011 (kernel 3.1.1)
    
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
    Quote:
    
    
    
    Language Turkish is selected.
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    User Interface: yes
    Use DHCP: yes
    
    We take note of the IP address of the current settings section.
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    I need to do some adjustments in order to install Channel List.
    
    Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
    (Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.
    
    Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.
    
    For this
    Menu => Plugins => Green Key (Attachment Download) A is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
    Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (December 26, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Add-on (plugin) installs are doing:
    
    We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
    Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.
    
    Quote:
    
    
    
    İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.
    
    
    Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.
    
    
    Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.
    
    Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.
    
    Quote:
    
    
    
    HDMI is selected.
    1080i was chosen
    
    Image configuration.
    
    Quote:
    
    
    
    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed to. Green Key (OK), with the changes noted.
    
    Quote:
    
    
    
    Under the System category, hotplug,
    PermanentClock under the System category,
    PositionerSetup under the System category,
    Satfinder under the System category,
    Setpasswd under the System category,
    VideoEnckancment under the System category,
    VlcPlayer under the Software category,
    Autoresolution under the category of multi-media,
    MyTube under the category of multi-media,
    SimpleRSS under the category of multi-media,
    VirtualZap under the category of multi-media,
    WeatherPlugin under the category of multi-media,
    Multi-media category was established under the YouTubePlayer
    
    Quote:
    
    
    
    Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
    Code:
    
    ipkg install / tmp / *. ipk
    
    Quote:
    
    
    
    Important note: Copy and paste the command can Yıkarıdaki shape. In addition, there is no need to type the name of the plugin. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
    
    Quote:
    
    
    
    turkuazpanel_0.3.5_mipsel.ipk established.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.
    
    Quote:
    
    
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    
    
    ShowClock established. exit, press the key long-term.
    
    Quote:
    
    
    
    BitrateWiewer established.
    
    Quote:
    
    
    
    Sherlock was 5.0.
    
    Quote:
    
    
    
    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)
    
    Quote:
    
    
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    
    
    enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
    
    Quote:
    
    
    
    enigma2-skin-hdglass16_4_03_mipsel.ipk established.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.
    
    Quote:
    
    
    
    enigma2-plugin-glasssysutil_4.07_mipsel.ipk established.
    
    Quote:
    
    
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    
    
    Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo
    
    Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.
    
    Emu are doing the installation:
    
    Note: Emu glasssysutil installation is made of.
    
    Glass in the remotes UnivCam Manager (0) key you want to install other emuları.
    
    In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.
    
    CCcam 2.3.0
    Mgcamd 1:37 and
    Mgcamd was 1:38.
    
    CCcam 2.3.0 emu Backupda appointed as active. After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.
    
    CCcam.cfg enter a file server
    
    key establishment and key update installer we also deal with:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    
    Kurulumlarımızı our config and do the other.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 / directory should be submitted under.






    DOWNLOAD

  4. #23
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Turkuaz Team Mod Pli (05.01.2012) Vu+ Solo
    
    First of all, the latest version of the Pli Official Site of the new image to usb from the download and installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After installation to be done after the installation settings::
    
    
    Quote:
    
    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.
    
    Where You can call this channel channel list or we can install ready.
    
    To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create
    
    We need to establish Webinterface to install any plug-in Channel List. For this
    
    Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you find the extensions under the category of plug-in webinterface_old kumandamızın on the OK button is pressed while.
    
    Cihazımızı re-launching plug-in order to be effective.
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings when loading the editor need not to enter the value of the rope.)
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (December 26, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Channel setting is sure to reboot after installing the device.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed to. Green Key (OK), with the changes noted.
    
    Quote:
    
    Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    
    Determination of the initial channel:
    
    Quote:
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down options, press the OK button on your remote control set-point as the stratup service.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service as the startup option to stop using the drop-down options, press the OK button on your remote control point.
    
    Quote:
    
    
    set as the startup service: Channel D
    
    Add-on (plugin) installs are doing:
    
    Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category.
    
    Quote:
    
    Add-on manager;
    under systemplugins Autoresolution,
    under systemplugins Setpasswd (Password is assigned),
    under systemplugins videoenchancement,
    backupsuite under the category of extensions (8.2),
    bitrateviewer under the category of extensions,
    under the category of extensions cccaminfo
    under the category of extensions dreamexplorer 7.3,
    permanentclock under the category of extensions,
    sherlock under the category of extensions (5.1) (help press),
    under the category of extensions showclock (exit, press the key long-term),
    simplerss under the category of extensions (supply address has been entered),
    under the category of extensions virtualzap
    under the category of extensions vlcplayer
    under the category of extensions weatherplugin
    under the category of extensions youtubeplayer
    established under softcams ccam 2.3.0.
    
    Whenever you install plugins as external. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
    Code:
    opkg install / tmp / *. ipk
    Quote:
    
    turkuazpanel_0.3.5_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)
    
    Quote:
    
    enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
    
    Quote:
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" was
    
    Emu are doing the installation:
    
    Emu downloadable add-ons were setup.
    
    CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.
    
    CCcam.cfg enter a file server
    
    key establishment and key update installer we also deal with:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    Code:
    Export MALLOC_CHECK_ = 0
    opkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    Kurulumlarımızı our config and do the other.
    
    If we want to install the interface as described in Attachment installations can be done.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    Quote:
    
    Bootlogo and changed the radio fund.
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.
    
    Quote:
    
    Uploaded on Türksat picon file ..
    
    
    Prepared in accordance with the above description for the backup link I give Vu + Solo. Who want to download and install and inspect:
    
    
    
    Enjoy ...












    Download

  5. #24
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Turkuaz Team Mod BlackHole 1.7.0 Vu+ Solo
    
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: (1) Vu + Duo with the image of a USB install is
    
    After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings
    
    Quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.
    DHCP on the network.
    
    Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.
    
    To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (December 26, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 has been added satellites. Added lists as old satellites.)
    @ Galaxy2002
    
    Channel setting is sure to reboot after installing the device.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Add-on (plugin) installs are doing:
    
    Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    Quote:
    
    
    
    Add-on manager;
    PermanentClock under the System category,
    Setpasswd under the System category (the password is assigned),
    StartUpService under the System category (Channel D),
    VlcPlayer under the Software category,
    SimpleRSS under the category of Multi-media (not active),
    VirtualZap under the category of Multi-media (press and hold the arrow key),
    Multi-media category was established under the Weatheer Plugin.
    
    Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.
    
    In line with our desire to do other simple config for:
    
    Quote:
    
    
    
    Menu> Setup> System> Audio / Video settings
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to Scale (OK) acknowledge.
    Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) We acknowledge with.
    Menu> Setup> System> Customize section of the user's experience as an expert in changing the Green Key (OK) We acknowledge with.
    
    Determination of the initial channel:
    
    Quote:
    
    
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down options, press the OK button on your remote control set-point as the stratup service.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    Quote:
    
    
    
    
    set as the startup service: Channel D
    
    
    We can install some plugins that are not BH Panel Addons Manager add-on manager. For this purpose;
    
    Press the green and yellow, respectively Kumandamızın BH Addons Manager and select the rear panel, we come back. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While we want to establish a plug-in on this too, and then the OK button is pressed kumandamızın. Brief explanations about the plugin will display the info. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, press OK to carry out the installation.
    
    
    Quote:
    
    
    
    DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v4.2 Sherlock WebMedia was 5.0.
    
    As described above, you can install the Apple Trailer v1.0 addons Mangere. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This causes the addons panel or the / tmp directory needs to be established.
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow and then drop-down menu, press the "Manual Install Ipk packges" on your remote control, point to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
    
    Quote:
    
    
    
    turkuazpanel_0.3.5_mipsel.ipk established.
    
    Quote:
    
    
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    
    
    ShowClock established. exit, press the key long-term.
    
    Quote:
    
    
    
    BitrateWiewer established.
    
    Quote:
    
    
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    
    
    r0_beta2 buyukbangpanel_1.1-founded.
    
    Quote:
    
    
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    
    
    Menu => Plugins => tunisiasat come first as an e-addons-manager_3.0 livefootball (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was
    
    Emu are doing the installation:
    
    E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.
    
    CCcam 2.3.0 emu Backupda selected as active.
    
    CCcam.cfg enter a file server
    
    E2_Mgcamd_138_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    2.0 Manual has been established as the BTK glass. btkcam.cfg file / usr / k.eys below. Server information must be entered here. B-line are not included.
    
    N, O, and key update installer we also deal with the establishment of:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    
    ipkg update
    
    Once installed, the update of k ey are doing.
    
    Kurulumlarımızı our config and do the other.
    
    If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.
    
    Quote:
    
    
    
    EleganceHDR_BH1.6x_VU_V2 interface is loaded. Is not active.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    Quote:
    
    
    
    Değişrtirildi bootlogo and radio fund ...
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.





    DOWNLOAD USB

  6. #25
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
    Quote:
    
    Language Turkish is selected.
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    User Interface: yes
    Use DHCP: yes
    
    We take note of the IP address of the current settings section.
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    I need to do some adjustments in order to install Channel List.
    
    Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
    (Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.
    
    Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.
    
    For this
    Menu => Plugins => Green Key (Attachment Download) A is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
    Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    Backupda Channel List TurkuazPanel 'loaded from.
    
    Quote:
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Add-on (plugin) installs are doing:
    
    We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
    Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.
    
    Quote:
    
    İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.
    
    
    Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.
    
    
    Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.
    
    Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.
    
    Quote:
    
    HDMI is selected.
    1080i was chosen
    
    Image configuration.
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed to. Green Key (OK), with the changes noted.
    
    Quote:
    
    Under the System category, hotplug,
    PermanentClock under the System category,
    PositionerSetup under the System category,
    Satfinder under the System category,
    Setpasswd under the System category,
    VideoEnckancment under the System category,
    VlcPlayer under the Software category,
    Autoresolution under the category of multi-media,
    MyTube under the category of multi-media,
    SimpleRSS under the category of multi-media,
    VirtualZap under the category of multi-media,
    WeatherPlugin under the category of multi-media,
    Multi-media category was established under the YouTubePlayer
    
    Quote:
    
    Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
    Code:
    ipkg install / tmp / *. ipk
    Quote:
    
    Important note: Copy and paste the command can Yıkarıdaki shape. In addition, there is no need to type the name of the plugin. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
    
    Quote:
    
    turkuazpanel_0.4_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    ShowClock established. exit, press the key long-term.
    
    Quote:
    
    BitrateWiewer established.
    
    Quote:
    
    Sherlock was 5.0.
    
    Quote:
    
    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)
    
    Quote:
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    enigma2-skin-hdglass16_4_13_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-glasssysutil_4.07_mipsel.ipk established.
    
    Quote:
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo
    
    Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.
    
    Emu are doing the installation:
    
    Note: Emu glasssysutil installation is made of.
    
    Glass in the remotes UnivCam Manager (0) key you want to install other emuları.
    
    In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.
    
    CCcam 2.3.0
    Mgcamd 1:37 and
    Mgcamd was 1:38.
    
    CCcam 2.3.0 emu Backupda appointed as active. After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.
    
    CCcam.cfg enter a file server
    
    key establishment and key update installer we also deal with:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    Kurulumlarımızı our config and do the other.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 / directory should be submitted under.
    
    Quote:
    
    Picon Turksat and Eutelsat W3 set is loaded
    
    
    Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI
    
    Quote:
    
    Turquoise Backup Panel are taken from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
    
    Prepared in accordance with the above description for the backup link I give Vu + Solo. Who want to download and install and inspect:
    
    TurkuazTeamMod_Official_11_01_2012_solo
    
    After the installation can review the bookmarked links to the following:
    
    Original acclaimed Mount Operations






















    Download

  7. #26
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Linuxsat-support SLY UK & Tring Ready Vu+ Solo BlackHole 1.7.1 Backup by Mutz Nutz



    Whats New ?

    New Bootloader is required for this image so its advised to upgrade it first before flashing, get the bootloader HERE.
    This backup is Tring and SLY UK ready, Mgcamd v1.38+Newcs v170 will update Tring and oscam will update SLY UK entitlements.

    *Oscam v6253+CCcam v2.1.3*
    *Mgcamd v1.38+Newcs v170*
    *CCcam v2.3.0*
    *CCcam Providers update to 21.12.2011*
    *CCcam Channel Info update to 21.12.2011*
    *Oscam.srvid Tring & SLY UK update to 21.12.11*
    *Livefootball 3.3*
    *Flashexpander ( needs setup for your device )*
    *Catseye E2 Settings File 75 East-58 West 20.01.2012*
    *Cooltvguide by Coolman V5.1.0*
    *TSpanel 4.5*
    *Glass System Utility full ver 4.07*
    *ECM Time As NAN Fix*


    Screenshots













    PASSWORD:
    linuxsatsupport

    DOWNLOAD

  8. #27
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Team Teal Mod 1.7.1 BlackHole Vu + Solo
    
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings
    
    Quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.
    DHCP on the network.
    
    Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.
    
    To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    
    
    Backupda Channel List TurkuazPanel 'loaded from.
    
    Quote:
    
    
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Channel setting is sure to reboot after installing the device.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Add-on (plugin) installs are doing:
    
    Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    Quote:
    
    
    
    Add-on manager;
    PermanentClock under the System category,
    Setpasswd under the System category (the password is assigned),
    StartUpService under the System category (Channel D),
    VlcPlayer under the Software category,
    SimpleRSS under the category of Multi-media (not active),
    VirtualZap under the category of Multi-media (press and hold the arrow key),
    Multi-media category was established under the Weatheer Plugin.
    
    Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.
    
    In line with our desire to do other simple config for:
    
    Quote:
    
    
    
    Menu> Setup> System> Audio / Video settings
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to Scale (OK) acknowledge.
    Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) We acknowledge with.
    Menu> Setup> System> Customize section of the user's experience as an expert in changing the Green Key (OK) We acknowledge with.
    
    Determination of the initial channel:
    
    Quote:
    
    
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down options, press the OK button on your remote control set-point as the stratup service.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    Quote:
    
    
    
    
    set as the startup service: Channel D
    
    
    We can install some plugins that are not BH Panel Addons Manager add-on manager. For this purpose;
    
    Press the green and yellow, respectively Kumandamızın BH Addons Manager and select the rear panel, we come back. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While we want to establish a plug-in on this too, and then the OK button is pressed kumandamızın. Brief explanations about the plugin will display the info. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, press OK to carry out the installation.
    
    
    Quote:
    
    
    
    DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v4.2 Sherlock WebMedia was 5.0.
    
    As described above, you can install the Apple Trailer v1.0 addons Mangere. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This causes the addons panel or the / tmp directory needs to be established.
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow and then drop-down menu, press the "Manual Install Ipk packges" on your remote control, point to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
    
    Quote:
    
    
    
    turkuazpanel_0.4_mipsel.ipk established.
    
    Quote:
    
    
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    
    
    ShowClock established. exit, press the key long-term.
    
    Quote:
    
    
    
    BitrateWiewer established.
    
    Quote:
    
    
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    
    
    r0_beta2 buyukbangpanel_1.1-founded.
    
    Quote:
    
    
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    
    
    Menu => Plugins => tunisiasat come first as an e-addons-manager_3.0 livefootball (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was
    
    Emu are doing the installation:
    
    E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.
    
    CCcam.cfg enter a file server
    
    E2_Mgcamd_138_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.
    
    N, O, and key update installer we also deal with the establishment of:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    
    ipkg update
    
    Once installed, the update of k ey are doing.
    
    Kurulumlarımızı our config and do the other.
    
    If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.
    
    Quote:
    
    
    
    EleganceHD_P_BH1.7x_VU_V1 interface is loaded. Was chosen as the active interface.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    Quote:
    
    
    
    Değişrtirildi bootlogo and radio fund ...
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.
    
    Quote:
    
    
    
    Uploaded on Eutelsat Picon Turksat set.
    
    Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI
    
    Full backup or usb hdd to the Main Menu BlackHole can backup device.




    DOWNLOAD

  9. #28
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    3,015
    Uploads
    1,520
    Likes
    2,712

    Re: Back Up Vu+ Solo Images

    Code:
    Turkuaz Team Mod AAF 29.01.2012 Vu+ Solo
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings
    
    Quote:
    
    Seçilidi HDMI.
    1080i is selected.
    Language Turkish is selected.
    DHCP on the network.
    
    Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.
    
    To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    Backupda Channel List TurkuazPanel 'loaded from.
    
    Quote:
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
    @ Galaxy2002
    
    Channel setting is sure to reboot after installing the device.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings:
    4:3 content is as follows: Just Scale
    > 16: P content is as follows: Just Scale
    Green Key (OK) and recorded.
    
    Quote:
    
    Menu> Setup> System> Button Setup mode QuickEPG across the extended value as the plugin has been changed to a bar.
    
    Add-on (plugin) installs are doing:
    
    Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category.
    
    Quote:
    
    Downloadable add-ons => systemplugins under the "setpasswd" (password is assigned),
    Downloadable add-ons => extensions under the "cccaminfo",
    Downloadable add-ons => extensions under the "MyTube",
    Downloadable add-ons => extensions under the "permanentclock",
    Downloadable add-ons => extensions under the "showclock",
    Downloadable add-ons => extensions under the "simplerss",
    Downloadable add-ons => extensions under the "vlcplayer",
    Downloadable add-ons => extensions under the "weatherplugin",
    Downloadable add-ons => softcams, under the "CCcam 2.3.0",
    Downloadable add-ons => under softcams, "mgcamd 1.38" was established.
    
    Quote:
    
    Menu => Setup => System => Extended SystemTime Setting> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
    Code:
    ipkg install / tmp / *. ipk
    Quote:
    
    Important note: Copy and paste the command can Yıkarıdaki shape. In addition, there is no need to type the name of the plugin. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
    
    Quote:
    
    Turkuazpanel_0.5_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    BitrateWiewer established.
    
    Quote:
    
    Sherlock was 5.0.
    
    Quote:
    
    Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)
    
    Quote:
    
    enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.
    
    Quote:
    
    file was edited on nStreamPlayer. @ Dursundursun
    
    Quote:
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Our device after restarting;
    
    Quote:
    
    Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo
    
    Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.
    
    Emu are doing the installation:
    
    Installation of add-ons have been downloaded from Emu.
    
    CCcam.cfg file / usr / k e ys at. Here you can edit the server by entering your information.
    
    CCcam 2.3.0 Backupda glass was selected as active.
    
    N, O, and key update installer we also deal with the establishment of:
    
    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
    
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    If the installation fails again, try to give the following command:
    
    Code:
    ipkg update
    Once installed, the update of k ey are doing.
    
    Kurulumlarımızı our config and do the other.
    
    If you wish to install downloadable add-ons, plug-in interface or external interface as described in the installation setup can do.
    
    Quote:
    
    pli-enigma2-skin-black-white-image_1.0_mipsel.ipk interface is loaded. Was chosen as the active interface.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    Quote:
    
    Değişrtirildi bootlogo and radio fund ...
    
    
    If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.
    
    Quote:
    
    Picon Turksat set is loaded.
    
    Settings and add-ons installed, then take the backup:
    
    VU + 'ta Duo & Solo USB and backup at NFI
    
    Quote:
    
    Turquoise Backup Panel are taken from.
    Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
    
    
    
    
    Vu + customized image link in accordance with the above description I give to solo. Who want to download and install and inspect:
    
    Easy come ...
    
    Enjoy ...
    Download

  10. #29
    VIP Member Lujdzo's Avatar
    Join Date
    14-06-2006
    Posts
    968
    Uploads
    48
    Likes
    8

    Re: Back Up Vu+ Solo Images




    VU+Solo VTI 5.0.0 Full UK Ready Backup By TenBelow








    Whats Included?


    Cams:
    Oscam 7675 & CCcam 2.13 Preconfigured For UK White Card


    Plugins
    Cross EPG
    Yamp Yet Another Music Player version 2.4.0
    Enhanced Movie Center (EMC) V.3.6.7 beta
    1Channel VOD
    RTE Player
    Muzu.tv Player
    Autobouquets Enigma 2


    Settings
    Catseye E2 Settings 04/01/2013


    Other
    Ecm Time Showing As Nan Fix Applied
    Oscam Colour Button CSS


















    All Image & Cam Passwords = linuxsat




    Enjoy!


    :tenb:




    Code:
    http://www.multiupload.nl/W3NGFXYT9G

  11. #30
    New Member
    Join Date
    26-09-2013
    Posts
    5
    Uploads
    0
    Likes
    0

    Re: Back Up Vu+ Solo Images

    thanks in advance too much
    but i need to make a full backup of my box
    and i need to save it after finishing it on my pc
    i allready made it using the black hole image it self but i can not transfere it to windows as the flash formated in ext filf and this is not readable in windows please help

Page 3 of 3 FirstFirst 123
Advertise Here

Similar Threads

  1. Vu+ SOLO Image Original
    By aguda in forum Vu+ Solo Images
    Replies: 23
    Last Post: 11-10-2011, 11:19:11
  2. Vu+ Duo / Solo Toolbox
    By wesstus in forum Vu+ Bootloaders / Drivers / Tools
    Replies: 0
    Last Post: 27-09-2010, 00:25:07
  3. Sólo D+ Por Astra ó Hay Más?
    By oceano in forum Spanish / Español
    Replies: 3
    Last Post: 12-04-2006, 19:45:19
  4. S*y solo in N*s
    By andreas_al in forum Italian / Italiano
    Replies: 4
    Last Post: 13-06-2005, 20:13:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •