Cablecom (Swiss cable network) ID 7301

[claude1000]

7301 00 53401F426E8987FBCEFFB17997A608DC

work fine in Carouge

[ironcode]

yea sorry, works fine (Berne):

N 7301 00 53401F426E8987FBCEFFB17997A608DC
N 7301 01 67268A474ED5A53867A2813A639D0F6A
N 7301 M1 7544E982065D53E7CF049AF2E725544A50268DA1 462F15D8A197ECE4B80FE221122F92AD56324380 A04878EBF563427DD85C38645907583E23AC5153 E300CF84

[itge13]

does work!!!

[halva77]

hi all thanks a lot for the great support here!
Got a question: Have issue with the TC channels. (on DM600 DVR) Above keys are working fine. (tested 1.10.) Since about 5.10. got some issue.
TC channels have only audio working. (screen is dark) Did now new channel search and try all other channels and receivers. Also added informations above several times with res
Got someone a tip?
Thanks!

[sharkyme]

Do you have rescan frequency?
Upc have change from 3 June

[halva77]

yes, done several times. no additional channel & transponder found. strange thing, then it was working all the time before. did not change anything. also after I did upload last ID, it was working for few days (?). thanks for support!

[medrotec]

Good day
I the same problem with the TC channels it is only the tone has there. Does someone have an idea?
Thanks for the assistance.

[gemini256]

Hello,

I have lost channels. And i dont found it. When a scanning another the channels my tuner dont found all the channels.

[lungen]

Good day,
The problem with the TC channels is caused by a format change of the TC Signal. TC changed the format from MPEG1/2 to MPEG4.
The 500c dreamboxes aren't able to handle this format.

[medrotec]

Good day
Thanks for these information. I do not have a 600C those can that apparently also. Isn't Linux the problem or supports the hardware of 500/600 MPGE4?
Thanks in advance.