Backups image for Vuo+Duo

**aguda** · 14-07-2011, 18:49:43

OE1-6-Oficial-V5.10-Troia-vuplus....VU+DUO

Imagem Backup do Troia
Depois de montada tem que acertar a rede (ip) e antenas no tuner para a antena que se tenha...
Ésta imagem oficial OE1.6 V5.10 que meti tudo do melhor que conheço de skin,emuladores,VTI painel picon 30w...etc...testem e digam se gostam...

USB
http://www.sendspace.com/file/px0e5e

NFI
http://www.sendspace.com/file/5wk4go

**aguda** · 15-07-2011, 21:03:01

Official Wu Duo 5.10 @ isayuksel Image Backup

First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is
After the setup wizard after installing the software is encountered. At this stage I'm only language choice. Other transactions without getting out of the wizard.
Quote:

Turkish language was chosen.

We check our config for the network.

Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
User Interface: yes
Use DHCP: yes

We take note of the IP address of your current settings section.

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

Channel List in order to install I need to do some adjustments.

Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
(Menu => System => Customize section) Enable the use of multi-bouquet "yes" as a change. Kumandamızın green button to save the changes (OK) is pressed.

Again, the channel setting, install, and we can do with the computer for other tasks "Webinterface" needs to create plug-in.

For this
Menu => Accessories => Green Button (Download Extension) a is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Here, under the extensions section "Webinterface" plug-in came on the OK button is pressed kumandamızın. "Extensions-Webinterface" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

"Practice is over the text" key to exit kumandamızın are going to see.

Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).

Quote:

Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

Tuner A: (simple) Not set, as desired.
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.

We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plug-in from scratch.
Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

"Practice is over the text" key to exit kumandamızın are going to see.

Us to establish this, more add-ons management (more options and removing add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

Quote:

İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.

Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will be first noticed Changeable. Add-up and drop-down menu and we will remove the red key now.

Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons you can mark (or remove).

We are under the System category, "StartUpService" i, under the direction of the image "videmode" plug-ins are choosing. With red button (back), she next to the red button (Close) are going. "Add-on Management activity information" window, choose Add-In (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.

When we started re-opening the connection with the reason we set up our device videomode plugin settings will be related to the shape and resolution.

Quote:

HDMI is selected.
1080i was chosen

Image configuration.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed. Green Key (OK) were recorded with the changes.

Quote:

Blindscan under the System category,
CommonInterfaceAssigment under the System category,
Hotplug system under the category,
PermanentClock under the System category,
PositionerSetup under the System category,
Satfinder under the System category,
Setpassd under the System category,
VideoEnckancment under the System category,
VlcPlayer under the Software category,
Autoresolution under the Multimedia category,
EasyMedia under the Multimedia category,
MyTube under the Multimedia category,
SimpleRSS under the Multimedia category,
VirtualZap under the Multimedia category,
WeatherPlugin under the Multimedia category,
YouTubePlayer established under the Multimedia category

Quote:

Menu> Add-Ins> Manage Add-ons (Red Button)> Visual Interface "Kern-HD1R2" was established. The interface has been activated

Emu are doing the installation of:

Quote:

Just leave çıkartıyoruz vu_cccam_official.zip file download. Folder in the files by ftp as described below cihazımıza yollayıp chmod values are holding.

1) S99-cccam.sh file etc/rc3.d / under throw chmod 777 of the value of the offer.

2) K01-cccam.sh file etc/rc4.d / under throw chmod 777 of the value of the offer.

3) CCcam file usr / bin / chmod threw under: 755 offer good value.

4) SoftCam.k O file usr / keys / under throw Chmod: 644 offer good value.

5) CCcam.cfg file etc / under throw Chmod: 644 offer good value. (Of course, we organize ourselves according to)

6) cccam.prio file etc / under throw Chmod: 644 offer good value.

Note: The panel from the TS can also make it easier to install Emu. In this case, you need to do CCcam.cfg file / etc directory if you have below will send a server by entering bilgilerinizide.

Quote:

Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D

When you want to set up as external plugins. Ipk file via ftp / tmp directory, take, then give the following telnet command to restart the device, and finally enough.

Code:
ipkg install / tmp / *. ipk
Quote:

tunisiasat manager_3.0 download-addons-founded.

Quote:

Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (2.0) and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c

Quote:

enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and

Quote:

Nstreamplayer plugin was 0.3.

Quote:

WebMedia plugin was downloaded.

Quote:

Zap was founded in pips. @ Ozkaradag

Quote:

EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) Was the subject of using the EPG Exporter plugin ...

Quote:

Established TSpanel 2.0.

Quote:

Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:
Code:
ipkg update

DOWNLOAD USB

DOWNLOAD NFI

**aguda** · 17-07-2011, 13:19:04

Backup BlackHole Vu+ Duo 1.6.3 Hdmi Cec By Comadreja

USB:
http://www.multiupload.com/CCVB1TBV5U

NFI:
http://www.multiupload.com/XSI4K7577Z

Añadidos:
vHannibal Dual feed setting 09.07.2011
Picons Lichers HD 05.07.2011
TSPanel 3.1 (Para tener de todo. Plugins, skins, cams, etc..)
LSK 0.3 Free Memory
Sbox 0.0.4-f
Sbox 0.0.4-f + Cccam 2.2.1
Sbox 0.0.4-f + Cccam 2.1.3
Cccam 2.2.1
Cccam 2.1.3

**fushkrujs** · 17-07-2011, 19:24:52

BlackHole Vu+ Duo 1.6.3 Hdmi Cec Backup @isayuksel

Code:

BlackHole Vu + Duo HDMI CEC Backup 1.6.3 @ isayuksel

First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is

Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Turkish language was chosen.
DHCP on the network.

Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.

To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create

We check our config for the network.

Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).

Quote:

Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002

Be sure to reboot after installing the device to the channel settings.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.

Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons you can mark (or remove).

Quote:

Add-on manager;
PermanentClock under the System category (not active),
Setpasswd under the System category (the password is assigned),
StartUpService under the System category (Channel D),
VlcPlayer under the Software category,
SimpleRSS under the Multimedia category (not active),
VirtualZap under the category of multi-media (press and hold the arrow),
Plugin Weatheer under the Multimedia category,
YouTubePlayer established under the Multimedia category
Image management under the category has been removed VideoTune

Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.

Also in line with our desire to make a simple config for:

Quote:

Menu> Setup> System> Audio / Video settings
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as an expert in the Green Key (OK) to acknowledge.

Initial channel identification:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.

When you restart your device to open the channel you want.

If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.

Quote:

set as the startup service: Channel D

When you want to set up as external plugins. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow, then the drop-down menu, press the "Manual Install Ipk packges" on your remote control by pointing to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and

Quote:

Nstreamplayer plugin was 0.3.

Quote:

WebMedia plugin was downloaded.

Quote:

Zap was founded in pips. @ Ozkaradag

Quote:

EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) Was the subject of using the EPG Exporter plugin ...

Quote:

tunisiasat manager_3.0 download-addons-founded.

After restarting our device;

Quote:

Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (2.5b), then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c

Quote:

AppleTrailer, MediaCenter MediaPlayer, Sherlock was founded ...

Quote:

Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:
Code:
ipkg update

Emu are doing the installation of:

E2_CCcam_2.2.1_bh download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.

Making settings for the installation and Bulsat mgcamd:

1) E2_Mgcamd_135a_bh download file (the file will not open), as in the / tmp folder, send the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.

2) Patched by mgcamd_1.35a Bulsatcom pinkyto0o Enigma2 zipten çıkarıyoruz download file. Zipten extracted in the folder
mgcamd_1.35a file via ftp / usr / bin under the taking. (Overwrite the existing file we print) the value of the file chmod 755 do.

3) add-ins come with the green key. Hacksat-k e y-Downloader plug-in point, the key Emuler Update> Mgcamd-key update to download CCcam Kéylerini do.

4) Black Hole Blue Panel also kumandamızın blue key left / right arrow keys to find the Mgcamd-1.35a. Kumandamızın We press the OK button. Mgcamd-1.35a is activated by pressing the OK kumandamızın even necessarily need to rerun.

CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.

Backupda active glass: Mgcamd, CCcam server you should use a cccam2.2.1 active. Server to enter a look at the following post:

CCcam.cfg enter a file server

Quote:

Oscam2901/CCcam213 was founded ... (Experiment not be able to. This matter has been added according to demand.'m Trying to ask our friends to declare either a positive or negative opinion.)

If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Manager Addons> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins.

I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:

Vu + bootlogo replacement program and the use of ...

If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, ndirdiğiniz zipten remove the folder / usr/share/enigma2 / directory should be submitted under. There is no Backupta.

After you install the backup settings and plug-ins take the VU + 'ta Duo & Solo USB and backup at NFI

Vu + Duo in line with the above description is prepared to give the backup link. Who want to download and install and review:

58166750821165254004.jpg
84393316522932209660.jpg
03537467305394623519.jpg
22484793743178419535.jpg
42698403618394892788.jpg
48053673454268489160.jpg

>>>Download<<<

**aguda** · 18-07-2011, 00:51:16

BK_BQ_Team-blackhole 1.6.3

Buenas a todos
Hoy traigo el segundo backup de BQ_Team creado por djchen y fandos para los VU+ Duo
basado en la imagen Blackhole 1.6.3 en la que hemos añadido unas cuantas cositas, para daros la mayor comodidad posible, sin cargar la imagen.

Plugins:

-CCcam info 1.3
-Livefootbal 2.0
-Script Backup img USB
-Mhw2epgdownloader:epg 7 dias sd y hd

Emus:

-CCcam 2.21 Full
-Sbox 0.0.48-2 & CCcam 2.13
-Mbox-4-b0022r3

Varios:

-Lista de canales junio astra + horbit del amigo KR5323
-Sintonizador A astra + horbit
-Sintonizador B conectado a A
-Tdt usb volar black HD A850 activado
-DHCP desactivado
-IP 192.168.1.40
-Password cambiado ( boqueron )
-Logos de inicio personalizados BQ_Team
-Spinner personalizado BQ_Team

espero que os guste para poder seguir subiendo futuros backup

DOWNLOAD USB

Salu2

**aguda** · 23-07-2011, 11:57:13

sly uk ready ViX Team v2.2.100 Vu+DUO backup

Whats New ?

This image is sly uk ready with Oscam and CCcam editted for updating entitlements
Mgcamd 1.35a
CCcam 2.1.3
Oscam 5703
CCcam Providers update to 23.07.2011
CCcam Channel Info update to 23.07.2011
Catseye E2 Settings File 75 East-58 West 09.07.2011
Nephilim 28.2E Picons (usr/share/enigma2)
Cooltvguide Coolman V4.0.0
TSpanel 3.2
Screenshots

PASSWORD:
vuplus

Download USB

Download NFI

Enjoy
Linuxsat-support Team

**aguda** · 23-07-2011, 11:58:45

ViX Team Vu+ Duo Image v2.2.100 İmage Backup @isayuksel

Code:

VIX Team Vu + Duo Image Image Backup v2.2.100 @ isayuksel

First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is

Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Turkish language was chosen.
DHCP on the network.

Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.

This theme for this review: (4) Vu + Duo-channel search and bookmark create

We check our config for the network.

Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

4 different methods to throw the Channel List (Contacts).

Be sure to reboot after installing the device to the channel settings.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.

Menu => Accessories => Green Button (Download Extension) a is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Quote:

Downloadable add-ons => systemplugins Autoresolution below,
Downloadable add-ons => systemplugins setpasswd below,
Downloadable add-ons => permanentclock under extensions,
Downloadable add-ons => MyTube under extensions,
Downloadable add-ons => extensions under the Sherlock-vuplus (5.01),
Downloadable add-ons => simplerss under extensions,
Downloadable add-ons => virtualzap under extensions,
Downloadable add-ons => vlcplayer under extensions,
Downloadable add-ons => weatherplugin under extensions,
Downloadable add-ons => youtubeplayer established under extensions.

Emu are doing the installation of:

wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device of the / tmp folder, send out the bottom. Menu> Setup> VIX> Offline add-in download section to come, "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın. We acknowledge again başlatmayıda.

Enigma2-plugin-cams in the same way, the do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation.

mg_cfg file / usr / send keys under.

CCcam.cfg file / etc folder is located. This file server uses the knowledge should not to enter.

Quote:

CCcam 2.2.1 Installed | Installed Mgcamd 1.3.5a | Bulsat Patch File is loaded.
Bulsat Patch File Download:
Bulsatcom mgcamd_1.35a download Patched by pinkyto0o Enigma2 çıkarıyoruz zipten. Zipten extracted in the folder
mgcamd_1.35a file via ftp / usr / softcams under the taking.
do chmod 755 value.

Quote:

Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout
Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın.

Quote:

tunisiasat manager_3.0 download-addons-founded.

Quote:

Menu => Accessories => tunisiasat-addons-manager_3.0 tunisiasat plugins to come in here, "Netradioturk_2.6-b" and "LiveFootbal" founded

Quote:

enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.

Quote:

WebMedia plugin was downloaded.

Quote:

Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set up, started service: Channel D

DOWNLOAD NFI
http://www.mediafire.com/?kirgr7ofsipzjsj

DOWNLOAD USB
http://www.mediafire.com/?4gobsvjvpxfudfv

**aguda** · 24-07-2011, 22:33:47

Backup BlackHole Vu+ Duo 1.6.4 Hdmi Cec By Comadreja

Añadidos al Backup

Settings Dual By CST 23.07.2011
Picons By Lichers 05.07.2011
Actualizado TS Panel a versión 3.2 (Dentro de este panel encontraras todo lo que necesitas para poder moldear la imagen. Addons, Keyupdater, skins, etc.. Incluye el LSK Addons manager y el Free memory by Terrorman)

Emus:
SBox 0.0.5-0 #3 + Cccam 2.2.1
SBox 0.0.5-0 #3 + Cccam 2.1.3
SBox 0.0.5-0 #3
Cccam 2.2.1
Cccam 2.1.3

Dhcp activado....

USB:
http://www.fileserve.com/file/Rk38Gn3

NFI:
http://www.fileserve.com/file/4vPCRDE

**aguda** · 25-07-2011, 11:52:49

BlackHole Vu+ DUO 1.6.4 Full Hdmi-Cec Backup @isayuksel