Opticum HD X4 & HD X7 EMU Firmware

[dreamer1983]

Firmware are modificy by gisclub.tv
all new keys are merged by dreamer1983
NOTE: insert this firmware only with rs232 0-modem cable don,t do it with usb are not tested
=============================================================================================
The main change is a test function SMAP - a kind of fill prioriti sheet, which is incorporated in all known file hsdata.

In English it is described as follows:
cmd-> smap ~ degree ~ tp ~ service_id ~ caid ~ ecmpid ~ chid ~ commit
# Sample smap ~ 130 ~ 11 420 ~ 567 ~ 500 ~ 789 ~ 00 ~ abc tv
# For smap cmd. degree, tp should be decimal, service id, caid, ecmpid, chid should be hex. max support 256 service map
# Degree, tp, service_id. make sure which channel u want map.
# Caid, ecmpid, chid. make sure only this ecm is used for this service. all other ecm will be ignored.
# Sat degree. if east. like hotbird 13 east degree. will be 13 * 10 = 130. for west. like nilesat 7 west degree, will be (360-7) * 10 = 3530

Let's translate and analyze that which we enter and how it will work.
======================================================================

[dreamer1983]

New emu firmware ver 1.4.41
This firmware are modificy By FFTeam
and keys are merged by dreamer1983
- HS 2.03
new remote & old remote ok

[timire]

I loaded it with usb it installed well, but when I test it with my cccam server, channels take time to open.It is not fast with my cccam server and also my cccam server did not open one satellite out of the 3 satellite am hooked to.So I revert back to Ali3602_06020200_ globo_amster 1.4.34 which is very fast with my cccam and also open all the satellites I hooked to.

[ALFAJAY]

New Software for old and new remote

ILTV-1.4.39-X4-new+oldRemote

[sohagpnk]

There is no net server config and net client config option in network menu Ali3602_06020200_ globo_amster 1.4.34 firmware how can i get this ?

[timire]

They are there check well.Are you sure you are using the right Ali3602_06020200_globo_amster 1.4.34 firmware? cos that's what am using and those functions are right there.This amster firmware is very fast and stable with cccam account.I've tried others none satisfied me as this.

[sohagpnk]

please send me the firmware or give me the link for download

[r3c0n]

please send me the firmware or give me the link for download

http://www.satsupreme.com/showthread.php/158020-Opticum-HD-X4-amp-HD-X7-EMU-Firmware?p=855184&viewfull=1#post855184

For Opticum X4 (402, 403,..)

ALI3602_06020200_globo_OPTICUM_HD_X4_220 _ps_amstar_1.4.34.rar

or if you have receiver with DVB, Opticum X7: ALI3602_06000200_globo_OPTICUM_HD_X7_300 _ps_amstar_1.4.34.rar

Amstar Firmware is the best so far. Quality by SD Channels is nearly HD.
By other Firmware the Remote control buttons are not full matching and the Picture Quality on a HD-TV is poor on non HD Channels if look closer.

[falasha28]

Hi,

I have loaded my Orton x403 with the amstar 1.4.34 firmware. But the problem is that it detects the USB but the menu is grayed out and there is nothing you can do on USB (upgrade and PVR). Kindly assist.

Secondly, can anyone assist me with manual inputting of HD frequencies. I cannot locate the menu for DVB-S2 (i.e. to input either QPSK or 8PSK and also selecting the FEC for HD channels)

Regards

[timire]

Hi,

I have loaded my Orton x403 with the amstar 1.4.34 firmware. But the problem is that it detects the USB but the menu is grayed out and there is nothing you can do on USB (upgrade and PVR). Kindly assist.

Secondly, can anyone assist me with manual inputting of HD frequencies. I cannot locate the menu for DVB-S2 (i.e. to input either QPSK or 8PSK and also selecting the FEC for HD channels)

Regards

Ensure you are using a good usb drive. Delete any folder or just make sure u put the software inside empty usb drive.
To upgrade go to menu-->system-->upgrade by usb and load the software.
Then for the manual inputing of HD channels FEC and the rest stuff you need channels editor tools.

http://www.satsupreme.com/showthread...or-HD-SD/page2