NO ATR Blue DRAGON CARD

[fadiss]

Please help me in the Blue Dragon card after writing NO ATR

[michael318]

Please help me in the Blue Dragon card after writing NO ATR

write your card with this loader: DragonLoader v1.1 from here : http://www.satsupreme.com/download.php?id=232865
+ an irdeto file eg: novaxxxxxxx.bdc and you would be ok!!

[matrixcoder]

Have the same problem NO ATR and no card detected.

Anyone managed to get atr again??

[jugoslav]

Bdc atr restorer

[matrixcoder]

Nothing helps card is dead.

[jugoslav]

I've made some major changes to my BDC_ATR_Restorer WinExplorer script.

This will NOT resurrect a card that has been killed with a killer BDC file.

However, it will restore the ATR to a BDC which is stuck in application mode and the Dragon Loader cannot erase or detect it.

You must use a Phoenix Interface, initially at 6.00 MHz, ideally in a "real" rs232 comport. Then, when prompted, change to 3.57 Mhz and run the script again. It works fine for me with a CAS3 interface.

Please give feedback on any success or not.

[matrixcoder]

Still not working :(

[jugoslav]

restore atr gamma card end blue dragon card

[golf1979]

Bdc atr restorer

Working...
TX Data : 01 02 FE DE AD 00
TX Data : 01 02 FE DE AD 00
TX Data : 01 02 FE DE AD 00
TX Data : 01 02 FE DE AD 00
TX Data : 01 02 FE DE AD 00
TX Data : 01 02 FE DE AD 00
Error!
The card has no ATR!
Try another card in your card reader to check that the hardware is working properly.
If you see just '3B' or no ATR then press the Analyze ATR button to show the new ATR
If still no ATR or '3B' then pull and replace the card and reset again .
If that does not work then try running the 'Didem _ATR_restorer.xvb' script.

........Or maybe your card is truly dead. Sorry.

[thor_]

this card is finaly death