Inserting dcw/ccw keys for strong stb

[jascosix]

hi guys,
How does one insert dcw/ccw keys on strong stb's after pressing 8282 keys and the menu comes up. What is the next step for a specific channel?

[KARABANGA]

hi guys,
How does one insert dcw/ccw keys on strong stb's after pressing 8282 keys and the menu comes up. What is the next step for a specific channel?

Hi. To enter BISS/DCW/CCW keys is the same method. You need to attach the keys to the channel as follows: if keys are for channel ABC then select channel ABC. Go into your receiver BISS menu by pressing 8280 on remote or go to MENU - SYSTEM INFORMATION - BISS. Check in BISS menu that channel name is correct ie ABC and then select a spare line and press OK on remote to bring up a alpha/numeric keypad. Use this keypad to select and enter the key values; for example to enter A move cursor to A and press ok to insert. When key has been entered then exit and save changes. Channel should open. Remember that you need to be on correct channel before entering keys otherwise it wont work. Please note that BISS keys are usually 16 characters long and DCW/CCW are 32 characters long. If your line requires 32 digits then you will need to add 16 zero's at the end for the BISS key. The above method is for TM receivers and similar but may work for your receiver as well. Hope this makes sense.

Regards.