Solution Morebox Card Initializing & Damaged

[opentel25]

This is a tutorial how to solve the problem of morebox card smartcard initializing With Samsat HD 80.

1- First Of All , Send The file named " New_MOREBOX Card_Samsat_80_HD this firmeware With USB"( it is a must! )

Wait till the End of the process Do not touch or turn off the receiver and do not insert the card !

-You will see the receiver restarts after and write Boot and Load on the front of the receiver Do Not touch Or turn Off till the End Of the process and shows number of channel on the front !

2- Now insert The morebox card In , You will see as it is shown on the pic Bellow

It will be shown As Abracadabra Card , Now take off the card from the receiver , and do the same thing as the first process , it means through out the USB you have to send the file named " EN8900 HD_3602_V6_MOREBOX_2T_14112011 " All Files are in the attached Files.


When the process is finished insert the card in again and you will see that morebox card will be read correctly !
As well as ,with this two processes you will recover the damaged morebox card .And always remember !

[carabo]

Hello, in process 2, you say:

-Now insert The morebox card In......
-When the process is finished insert the card in again....

My question is this: You insert the card (process 2), but the receiver is on or the receiver is off.

The best regards and thanks for your tutorial.

[opentel25]

Hello, in process 2, you say:

-Now insert The morebox card In......
-When the process is finished insert the card in again....

My question is this: You insert the card (process 2), but the receiver is on or the receiver is off.

The best regards and thanks for your tutorial.

Process 2 l said insert the card you will see as it is shown on the pic abracadabra card of course the receiver must be ON otherwise how would you see !

[carabo]

I ask you, if, before inserting the card, the receiver must be turned off and once inserted the card then turn on the receiver.

I say the following for the process 2:

A-receiver off, inset card, turn on the receiver and I will see the image of abracadabra

or

B-receiver on, insert card, and I will see the image of abracadabra.

Please tell me if option A or B.

The best regards and thanks you.

[dragadosse]

Peace
I have applied all the instructions and guidance, but in instruction n=2 did not succeed
Problem in the card
Any guidance?

[opentel25]

or

B-receiver on, insert card, and I will see the image of abracadabra.

l meant this : B-receiver on, insert card, and I will see the image of abracadabra.

[opentel25]

Peace
I have applied all the instructions and guidance, but in instruction n=2 did not succeed
Problem in the card
Any guidance?

it should work if you've followed the process , make sure that the card is not inserted , the receiver mut be turned on then , tou insert the card and see !

[bosson_23]

the probleme is not solve with this methode , waitting another solution thankx