Diablo Tools and Keys Editor

[stauffie2]

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System


CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.35 (16/01/2009)
- Emulator
*Monitor: emulator can be started without loading keys file
*Tracker: datas log modified
*Added ECMs Cache for diablo wireless: To activate cache tick case "ECM CACHE" on tab WIRELESS
*Card Client (cs):
>>>>added camd33 support
>>>>added camd35 support (cs357x & cs378x), server Description must include UPD or TCP word
example:
Camd35 Local Server (TCP) = TCP connection
Camd35 Local Server (UDP) = UDP connection
>>>>Added Tab IDENT:
define CAID & Provider(s) supported by card (can be apply for Newcamd/Camd3X/Radegast)
Details on file Fausto & Card Client.txt (Fausto folder)
*NEW TAB SERIAL Added:
Connection to Receiver Serial port using SSSP (=Simple Serial Sharing Protocol)
(Tested Clarke Tech 5000 HD & Goldvision patched ALI firmware)
Connection to Receiver Serial port using HSIC (=Humax Sharing Interface Client)
(Tested under Humax 5400 (patched with TOH - HOT firmware) & HSIC: Need to have card+S+emu in box config and emm block on)
Report to file Fausto & Receiver Serial How To.txt for more details (Fausto folder)

-Extra:
*Language files: New datas added ready for translation


Special Thanks to:

All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.


Enjoy.

[bozomustafa_68]

Latest Fausto New Version 1.36

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM

FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT

Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System


CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.36 (18/03/2009)
- Editor
>>>>Caids File Edit
*Added Drag file function
*Added possibility to edit Comment line, Source list changes saved auto
>>>>Export keys Files
*added Comment datas on caids.xml
*modified file Fausto_CAIDS.TXT
>>>>Import Keys
*added somes coding system for filter selection selection (irdeto,betacrypt,conax)
*fixed somes problems


- Emulator
*Setup: New Tab for editing Fausto INI Files

*Season:
>>>>Emulation Irdeto -> possible to define custom caids (report to file Fausto & Season Irdeto Custom Caids.txt)
>>>>Emulation Conax/Cryptoworks -> added Caid definition (File Season.ini [SeasonCaid])
Tested with caid 0BAA & sub card worked great under FE Card support
Tested Cryptoworks caids with Fausto Emu worked without any prob
>>>>Emulation Conax -> added Atr definition (File Season.ini [ConaxAtr])
>>>>Emulation Cryptoworks -> Added Providers definition (Ident+Label) on file \Fausto\EMU\Season\CryptoworksProviders. ini

*Cards support: (File \Fausto\Emu\Cards\Cards.ini)
All datas concerning cards stored on new file \Fausto\Emu\Cards\Cards.ini
>>>>Seca, Conax added support of frequency 6.00 MHZ for better performance
>>>>Seca -> can unlock channel protected by parental code (ex: Seca French Card, Channel Canal+ -> XXX Movie)
>>>>Conax -> added M2 card support or similar (no freeze at all, tested under 3.57 & 6.00 MHZ)
>>>>Conax -> Possible to define Maturity level & Pin Code for unlocking channels
>>>>VG2 -> added card baudrate auto detection or Set Baud wanted on INI file
>>>>Cryptoworks -> possible to define on file AtrBauds, AtrParity, AtrStopBits, DataBauds, DataParity, DataStopBits according to the different cards
>>>>Cryptoworks -> read card subcriptions
>>>>Irdeto -> irdeto pure mode or irdeto xin1 supported (settings on cards.ini ECMFilter datas)
>>>>Card log file modified more infos added

*Cards Client (cs):
>>>>Fixed bug for Radegast server auto detection
>>>>Added Gbox client (localhost only, default ports)
>>>>Updated default local host servers list


*DVB Plugins:
>>>>added Fixes for SSSP/HSIC
>>>>added Optimizations, more faster

-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.

[mikame]

Latest Fausto New Version 1.36

[bozomustafa_68]

Fausto
©MASARE Team-Saoud007
©FullDump TM

Latest Fausto New Version 1.36


FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:

Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.37 (23/05/2009)
- Editor
********Caids File Edit
Added possibility to edit/modify/save caid source file -> Press + button

- Emulator
*Monitor:
Added option Monitoring: tick the case to show datas (Ecm,Caid,Prid,keyid,Key,CW,Ch.infos)
by default set to ON

*Season:
********Emulation Conax -> Caid bug fixed

*DVB Plugins:
Made somes changes under MDAPI Wrapper to accruate compatibilities with more plugins
(=somes plugins not worked before worked now)

*Server:
Added cards servers for
Newcamd,
Radegast,
Camd33,
Camd35 TCP
Camd35 UDP
Report to Fausto & Cards servers.txt for details (Folder ..\Fausto)
It extend Fausto portabilities to more receivers
(tested Fausto Card server emu+cards with my Dreambox worked like a charm)

*Clients:
Modified incoming Card Information according to Fausto Server Manager
(ex under Radegast can get card detail from server)

*Setup
Cards.ini file modified
Section [VG]
- Now BoxID value must be entered in Hexadecimal value (ex: 01020304)
- Added new data "EchoByte"
#EchoByte Boolean value (0=false 1=True)
#example for sky Uk EchoByte=1
#example for sky Ita (0919), Viasat EchoByte=0

*Cards Support:
Added EMM support for card server
New VG Card supported: Sky Ita (0919) & Viasat

- Files settings :
FESettings.ini
Cards.ini,
Season.ini
IrdetoCustomCaids.ini
SecaProviders.ini
ViaccessProviders.ini
CryptoworksProviders.ini
Default Created only if existing not found


-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.

[mikame]

DiabloMaker Version 2.2 - TechSat Team
==================================


Array
DiabloMaker Version 2.2 - TechSat Team
=================================

This software automatically generates the KEYS.BIN file for Diablo Cam.

Questo software genera automaticamente il file KEYS.BIN per Diablo Cam.

Diese Software erzeugt automatisch das file KEYS.BIN für Diablo Cam.

Ce logiciel produit automatiquement file KEYS.BIN pour Diablo Cam .

Este software genera automáticamente el archivo KEYS.BIN para Diablo Cam.

What's news in 2.2 version?
-------------------------------------
° Adapted to changes in the structure of the database.
° Added direct link for download any makers tool in the Tab "Forum".
° Improved database access.


TechSat TEAM

[Fiku75]

To config well the cline for diablo wifi cccam;


c:192.168.1.10 12000 user password (this is the right configuration ok)

c: 192.168.1.10 12000 user password (not ok because there is space between c: 192.xx)

c:dns-host.no.ip 12000 user password (not ok. for me worked only with lan ip)

C:192.168.1.10 12000 user password (not ok because the C must be c)

hope helped all of you

if there are other news please update them.

[TV_LICENCE]

Here is some guide how to configure diablo wifi using Gbox

[passete]

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.38 (20/06/2009)
- Emulator

*Client:
Added Manager like for card server
Report to File Fausto ..\Fausto\EMU\CardClient\FaustoClients Example.Cfg for clients script
Report to File Fausto ..\Fausto\Fausto & Card Client.txt for details
Now all clients running at same time
Priorities defined by Server line order
NB: ClientBase.ini is useless, can be deleted after datas set on FaustoClients.cfg

*Card support:
VG: read tiers - Viasat better card init
Cards.ini file modified for VG, added optional datas: Atr, Parity & Stopbits
(rebuild default cards.ini for more details; delete existing and run Fausto emulator)

*Season:
Irdeto xin1: Added Cryptoworks caid selection under popup menu + somes minor changes
Seca, Cryptoworks made somes changes to make it better

-Files settings :
FESettings.ini modified due to changes on card client

-Extra:
*Language files: New datas added ready for translation

Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.


Enjoy.

[bozomustafa_68]

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
CCCam (TCP) tested with CCCam_2.1.1/CCCam_2.1.2
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.39 (04/09/2009)
- Emulator
Fixed problem with N3 prid, now ok with ecm & dcw

*Monitor: popup menu options (mouse right clic)
Under Auto Functions
Added Auto Start Servers & Clients
Added Auto Start Reader (phoenix mode), settings of reader stored on file Cards.ini (Freq & COM)
Fixed Auto Load KEYS file
Added Emulator On Startup -> if ticked emulator window loaded when Fausto application started
Fixed CW, Tracker, Monitoring settings saved on FESettings.Ini

*Clients: added CCcam support
-Tab Manager
Added CCCam server informations windows
Option avalaible ONLY for CCCam line
Double clic on CCCam client line to display server informations
NOTA: if Client manager not running window will be empty
Fausto Client CCCam.pdf file joined for details

*Servers:
added dvb pluggins support (can be shared too via server)
Added Local popup menu under tab Manager (start, stop, remove single server)
Modified ECM log Datas
Modified Log File Datas

*Season interface:
-optimized event manager
-Season Conax: accruate compatibilities now alphacrypt cam worked (Set Xsat=0 on season.ini)
-Season settings file
datas on section
[Emulator]
[CardClient]
[OfficialCards]
are now apply ONLY for season irdeto, others season emulation can retrieve provid auto
Added Data Xsat on section [ConaxAtr] for explanations report to file Fausto & Season INI File.txt
Delete existing Season.ini file to create a default one when Fausto emulator will be open
(Xsat data will be added used with Season Conax Emulation)

*Card support: irdeto card bug fix

[bozomustafa_68]

Version 1.39_B (04/09/2009)

*Editor
*Fixed Keys.bin file creation