Sim amigo ...é possivél ver canais codificados sem ter cartão...se procurares bem por aí á muitos meios.Originally Posted by janbyte
Cumpts .
katy
Yes friend ... You can see encrypted channels without card ... well if you look around you many ways.
Sim amigo ...é possivél ver canais codificados sem ter cartão...se procurares bem por aí á muitos meios.
Cumpts .
katy
Yes friend ... You can see encrypted channels without card ... well if you look around you many ways.
Thank you very much for your answer.
All the best,
Jan
hello!
WHEN I PUT THE FIRMWARE 1.4.88 IN MY RECEIVER AMIKO 8820 ALL CHANNELS WITH VIACCESS KEY DON'T WORK (mcaskey)
could you please fix it
thanks
Amiko HD-8840 Series
V1.4.88
Release Notes:
*FIX* Fixed an OSD display problem
what about??? could you fix it please?
Code:New emu firmware ver 1.4.88 new keys ok new setting ok by dreamer1983 Release Notes: *FIX* Fixed an OSD display problem Satellit: 1 TURKSAT 2A,3A 042.0E 2 HELLAS SAT 2 039.0E 3 ASTRA 2A,2B,2D / EUROBIR 028.2E 4 BADR 4,6 026.0E 5 ASTRA 1H,1KR,1L,1M 019.2E 6 EUROBIRD / EUTELSAT 016.0E 7 HOTBIRD 6,8,9 013.0E 8 INTELSAT 10-02 / THOR 5, 000.8W
anyone please?
any idea?
Amiko SHD 8900 Allien
Neutrino-martiiGit-by-FFTeam-31-10-2012
Instructions E2/Neutrino flash:
In preparation, the boot loader [SPARK] to [Enigma] be changed:
- Unit at the main power switch at the rear
Appears to hold while turning the [OK] [FORC] in the display -
- Now select with the arrow key [V] now [ENIG] and confirm with [OK]
- Box flashes for a few seconds now
- Switch off when finished> Box
Flashing Enigma2/Neutrino:
- Folder [enigma2] Create a USB Stick
- Unzip and copy the files "e2jffs2.img" + "uImage" to the [enigma2] to the stick
- Stick to the unit where infected
- Hold on power, press [OK] to [FORCED] appears
- Now press the arrow key [>] for update from a USB stick> now the upload will begin to flash, as evidenced by [U LD] in the display
- The device boots then newly independent
to install the setup wizard, comes (suitable for Scart)
Picons, logos drinne
Oscam-ip drinne: 8888 call for webif
- Pre-configured for common card, simply activate its over webif
NTFS-recording and playback
Recording in TS format
Pearl Display
Teletext
-Tuxboxcomannder
Broadcast List
Sound set
Wlan activated in the kernel menu
Pingulux-Plus included remote control
Load newest image on a USB stick to copy the 2 files in folder "enigma2"
Image install
after neutrino is started appears the device wizard - you can almost always go on further.
Then I add an even that:
pressing menu - 1 - 2 - Modify your volume to about 10
pressing menu - 1 - 7 - Red button - Select Theme from Classic to Thomas8 (I myself use thomas4)
pressing menu - 1 - 7 - Volume: Top center, advanced color bar: a,
pressing menu - 1 - 7 - 1 - Level indicator (var & HDD): OFF, broadcast color: Currently, info bar at start of program: A
pressing menu - 1 - 7 - 2 - broadcast in color: Current
menu - 1 - 8 can Pearl display on / off to make another appearance, etc.
NTFS is recording
Fat32 recording goes
IP: 8888 enter, click on his card reader and turn active
Menu, then press 2, here you can neutrino restart or boot Spark
NEW: neutrino martiiGit FFTeam-by-31-10-2012
TIP: FAV button, custom programs and program eg ARDHD choose
Notes:
*NEW* Added SkyL*nk emu support
To this firmware are installed many satellite by dreamer1983
this patch can upgradet with USB flash or rs232 cable
===============================
Astra2A 28.2*E
Badr-4/5/6 26.0*E
Astra 1H/K 19.2*E
Eutelsat W2M 16.0*E
Hot Bird 6/8 13.0*E
Astra 1E/4A 4.8*E
Turksat2A/3A 42.0*E
HellasSat 2 39.0*E
enjoy!
30.nov.2012
Reply With Quote
