Oscam YMOD - Bulcrypt 1

[Geryl]

Излезе нова версия 18-33 можеби отваря v2.Някой ще провери ли че няма никакво описание.

[turbopower]

Версия 2 самнява ме там бъга от вер 1 е оправен тоест за всеки приемник ключовете се извикват индивидуално. За нова та версия по важното е има ли билд за pc защото в предишната това липсваше.

[Geryl]

има има и за вин и за линукс

[atilla74]

Няма подръжка на в2

[radionov]

И аз пробвах версия2 ама ядец.

[atilla74]

и 33 не ъпва...

[toshko37]

за v2, няма и да стане, всяка карта е с различен ключ който е в процесора, ако го налучкате или прочетете по някакъв начин ... ще се похвалите ;)

[iv3]

Аз съм със DM500s Gemini_0470_DM500_max_var_12122009 опитвам се да подкарам една карта със ymodv18-t33 не знам дали е v1 или v2
Това ми е лог файла:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 00:00:17 1970
-------------------------------------------------------------------------------
1970/01/01 0:00:17 1833 300162A0 s >> OSCam << cardserver started version 1.00-unstable_svn-ymodv18-t33, build #0 (powerpc-tuxbox-linux)
1970/01/01 0:00:17 1833 300162A0 s version=1.00-unstable_svn-ymodv18-t33, build #0, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 0:00:17 1833 300162A0 s client max. idle=120 sec, debug level=0
1970/01/01 0:00:17 1833 300162A0 s max. logsize=50 Kb
1970/01/01 0:00:17 1833 300162A0 s client timeout=5000 ms, fallback timeout=3600 ms, cache delay=120 ms
1970/01/01 0:00:17 1833 300162A0 s auth size=17648
1970/01/01 0:00:17 1833 300162A0 s services reloaded: 0 services freed, 20 services loaded
1970/01/01 0:00:17 1833 300162A0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 0:00:17 1833 300162A0 s signal handling initialized (type=sysv)
1970/01/01 0:00:17 1833 300162A0 s 446 service-id's loaded
1970/01/01 0:00:17 1833 300162A0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
1970/01/01 0:00:17 1833 300162A0 s 1000 provid's loaded
1970/01/01 0:00:17 1833 300162A0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
1970/01/01 0:00:17 1833 300162A0 s monitor: disabled
1970/01/01 0:00:17 1833 300162A0 s camd33: disabled
1970/01/01 0:00:17 1833 300162A0 s camd35: disabled
1970/01/01 0:00:17 1833 300162A0 s cs378x: disabled
1970/01/01 0:00:17 1833 300162A0 s newcamd: disabled
1970/01/01 0:00:17 1833 300162A0 s cccam: initialized (fd=9, port=16000, crypted)
1970/01/01 0:00:17 1833 300162A0 s radegast: disabled
1970/01/01 0:00:17 1833 300162A0 s http thread started
1970/01/01 0:00:17 1833 300162A0 s creating thread for device /dev/sci0
1970/01/01 0:00:17 1833 300162A0 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 0:00:17 1833 300162A0 s waiting for local card init
1970/01/01 0:00:17 1833 31825B50 h HTTP Server listening on port 8888
1970/01/01 0:00:17 1833 32025B50 r reader thread started (thread=32025B50, label=reader1, device=/dev/sci0, detect=cd, mhz=300, cardmhz=357)
1970/01/01 0:00:17 1833 32025B50 r reader1 card detected
1970/01/01 0:00:18 1833 32025B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 0:00:19 1833 32025B50 r ATR: 3B 20 00
1970/01/01 0:00:20 1833 32025B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.00 Mhz
1970/01/01 0:00:21 1833 32025B50 r [bulcrypt-reader] type: BulCrypt, caid: 5581, serial: ******
1970/01/01 0:00:21 1833 32025B50 r [bulcrypt-reader] ready for requests
1970/01/01 0:00:21 1833 32025B50 r found cardsystem bulcrypt
1970/01/01 0:00:21 1833 300162A0 s init for all local cards done
1970/01/01 0:00:21 1833 300162A0 s anti cascading disabled
1970/01/01 0:00:21 1833 32825B50 c plain dvbapi-client granted (mylocalbox, au=on (1 reader))
1970/01/01 0:00:21 1833 32825B50 c dvbapi: 3 entries read from oscam.dvbapi
1970/01/01 0:00:21 1833 32825B50 c dvbapi: found pmt file /tmp/pmt.tmp
1970/01/01 0:00:21 1833 32825B50 c dvbapi: found pmt file /tmp/pmt.tmp
1970/01/01 0:00:21 1833 32825B50 c dvbapi: found pmt file /tmp/pmt.tmp
1970/01/01 0:00:22 1833 32825B50 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0F7C PROVID: 000000
1970/01/01 0:00:22 1833 32825B50 c dvbapi: new program number: 000F (5581:000F unknown)
1970/01/01 0:00:22 1833 32825B50 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0F7C PROVID: 000000
1970/01/01 0:00:22 1833 32825B50 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0F7C PROVID: 000000
1970/01/01 0:00:22 1833 32825B50 c dvbapi: stoping demux for pmt file /tmp/pmt.tmp
1970/01/01 0:00:22 1833 32825B50 c dvbapi: new program number: 000F ()
1970/01/01 0:00:22 1833 32825B50 c dvbapi: Start descrambling PID #0 (CAID: 5581) 1
1970/01/01 0:00:22 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:D5AA/09=22): found (88 ms) by reader1 - 5581:000F unknown
1970/01/01 0:00:25 1833 32825B50 c dvbapi: read error 110 on fd 21
1970/01/01 0:00:25 1833 32825B50 c dvbapi: try pids again #1
1970/01/01 0:00:26 1833 32825B50 c dvbapi: [ADD PID 1] CAID: 5581 ECM_PID: 0F7C PROVID: 000000
1970/01/01 0:00:26 1833 32825B50 c dvbapi: new program number: 000F (0000:000F unknown)
1970/01/01 0:00:27 1833 32825B50 c dvbapi: Start descrambling PID #1 (CAID: 5581) 1
1970/01/01 0:00:27 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:D5AA/09-22): cache1 (122 ms) by reader1 - 5581:000F unknown
1970/01/01 0:00:33 1833 32825B50 c dvbapi: emm filters started.
1970/01/01 0:00:33 1833 32825B50 c dvbapi: emm filters started.
1970/01/01 0:00:33 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:1DE8/29=48): found (90 ms) by reader1 - 5581:000F unknown
1970/01/01 0:00:33 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:1DE8/29-48): cache2 (92 ms) by reader1 - 5581:000F unknown
2012/07/12 6:28:01 1833 32025B50 r mylocalbox emmtype=shared (85), len=180, idx=0, cnt=1: written (547 ms) by reader1
2012/07/12 6:28:01 1833 32025B50 r mylocalbox emmtype=shared (85), len=180, idx=0, cnt=2: written (547 ms) by reader1
2012/07/12 6:28:08 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:7E64/43=89): found (89 ms) by reader1 - 5581:000F unknown
2012/07/12 6:28:08 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:7E64/43-89): cache2 (94 ms) by reader1 - 5581:000F unknown
2012/07/12 6:28:19 1833 32025B50 r mylocalbox emmtype=shared (85), len=180, idx=1, cnt=1: written (547 ms) by reader1
2012/07/12 6:28:20 1833 32025B50 r mylocalbox emmtype=shared (85), len=180, idx=1, cnt=2: written (547 ms) by reader1
2012/07/12 6:28:21 1833 32825B50 c mylocalbox (5581&000000/000F/0F7C/0000/4F:88EE/26=E3): found (89 ms) by reader1 - 5581:000F unknown

а това настройките

oscam.conf
[global]
usrfile = /tmp/user.log
logfile = /tmp/oscam.log
fallbacktimeout = 3600
cachedelay = 120
nice = -1
maxlogsize = 50
saveinithistory = 1
readerrestartseconds = 10


[monitor]
hideclient_to = 15
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = mylocalbox
pmt_mode = 0

[cccam]
port = 16000
reshare = 1
ignorereshare = 1
forward_origin_card = 0
version = 2.1.4
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.255,10.0.1.0-10.0.1.255


oscam.server
[reader]
label = reader1
protocol = internal
device = /dev/sci0
caid = 5581,4AEE
detect = cd
mhz = 300
cardmhz = 357
ident = 5581:000000;4AEE:000000
group = 1
emmcache = 1,3,2

oscam.user
[account]
user = mylocalbox
pwd =
group = 1
au = reader1
cccmaxhops = 0
keepalive = 0

[account]
user = ***
pwd = ***
group = 1
uniq = 1
au = 0
allowedprotocols = cccam
monlevel = 1
cccmaxhops = 2

Каде Бъркам?

[mminkov]

картата ъпната ли е, дай реда със серийния номер и зачисти само него, при мен е такъв:

2012/07/12 10:24:36 8643A10 r [bulcrypt] CAID: 0x4AEE|0x5581, CardType: 0x75, Serial: 11 4 xxxxxx 121, HexSerial: xx yy xx

вижда се и типа на картата 0x75. Като гледам, рийдъра пише в картата, остави я така на БНТ1 2-3 часа.
Направи си и този файл:
root@debian:~# cat /usr/local/etc/oscam.dvbapi
P: 5581:000000 1
P: 4aee:000000
I: 092F

И още, защо ползваш ymod, нали го анатемостахме, ако искаш ще ти компилирам някоя версия (само с булкрипт, N, C и L линии) - ако не можеш сам, избери си!

[iv3]

Не мога да компилирам затова ползвам ymod око ми направиш един ще съм много благодарен.

Нямам такъв ред дал съм целият лог който се генерира от
oscam.conf
[global]
usrfile = /tmp/user.log
logfile = /tmp/oscam.log