║➽║OScam║➽║OSCam unstable_1.20 ║🔴 v.11.960║

[multisat99]

oscam with irdeto 2 layer 2b support for caid 0624 skylink m7

Oscam for ARM and MIPS receivers supporting dynamic cam key for irdeto skylink cards. There is no need to enter boxkey and rsa key in the configuration.
It supports both ICE and pure irdeto M7 cards. For ICE cards it is necessary to set the configuration option force_irdeto = 1.

If the ARM version prints something like "-sh: oscam-skylink-arm: not found" at startup, then you need to create a symlink to the loader like this:
ln -s /lib/ld-*.so /lib/ld-linux.so.3

It supports using one irdeto card at a time - if more is needed, then run more instance of oscam.
The ARM version also works on the Raspberry Pi - tested!
The MIPS version contains a bug where, after a restart, the reader incorrectly initializes the keys to the card - it is necessary to restart the entire oscam.

The mipsel version version is working.
The arm version not found after files ln tested rpi3,4 can you help me?

[Tuci-Puci]

Oscam-svn11703

oscam-dream-arm-one-in-all-pack-with-without-cak7-with-without-emu-2021-11-16

OSCam ver: 1.20_svn rev: 11703 target: arm-dreambox-linux-gnueabihf-libusb | Tools:
| CROSS = /opt/s3/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf-
| CC = /opt/s3/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf-gcc
| Settings:
| CONF_DIR = /etc/tuxbox/config
| CC_OPTS = -O1 -ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -DWITH_LIBUSB=1
| LDFLAGS = -Wl,--gc-sections -DWITH_LIBUSB=1
| LIBS = -lusb-1.0 -lrt -lm -lpthread -ldl -lrt
| UseFlags = USE_LIBUSB=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY HAVE_DVBAPI WITH_NEUTRINO READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK CLOCKFIX
| Protocols: CAMD33 CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STINGER DRECAS SMART
| Compiler : arm-dreambox-linux-gnueabihf-gcc (crosstool-NG 1.24.0.188_b3ed2c4) 10.2.0
| Config : build/arm-dreambox-linux-gnueabihf-libusb/config.mak
| Binary : /opt/s3/support/binaries/oscam-svn11703-dream_arm-webif-dvbapi-libusb-upx

[Tuci-Puci]

Oscam DM9x0 / Vu+ 4K

oscam-svn11704-dream_arm_openssl_1_0-cak7-webif-dvbapi-libusb-upx
oscam-svn11704-dream_arm_openssl_1_0-webif-dvbapi-libusb-emu798-upx
oscam-svn11704-dream_arm_openssl_1_1-cak7-webif-dvbapi-libusb-emu798-upx
oscam-svn11704-dream_arm_openssl_1_1-cak7-webif-dvbapi-libusb-upx
oscam-svn11704-dream_arm_openssl_1_1-webif-dvbapi-libusb-emu798-upx
oscam-svn11704-dream_arm-webif-dvbapi-libusb-upx

[Tuci-Puci]

Oscam mit EMU für Fritzbox-6660, mit und ohne cak7 Patch

oscam-svn11703-fritz6660_os72_openssl_1_1_i686-freetz-cak7-webif-libusb-pcsc-emu798

[Tuci-Puci]

OSCam GP3 / Gemini OE1.6/OE2.0 (ipk)

Suitable for all Dreambox with GP3 and OE1.6 / OE2.0

Installation instructions: - Unzip * .zip
- Move * .ipk into / tmp directory of the box
- BluePanel> File Browser> tmp> * .ipk> green button / Install
If an older version is already available, it will be updated and updated.
When installing for the first time, select BluePanel> CI-Softcam>: OSCam 1.20> green button / Save

[Tuci-Puci]

MULTI_OPENSSL_OSCAM_TEST freetz_config
freetz_images_mit_openssl_1_0_x_und_1_1_ x_und_3_0_x
image_inmemory
MULTI_OPENSSL_OSCAM_TEST
s3_releases_toolchains
Toolchan-for-7490-multi-openssl
Wunschimage

https://www.freetz.digital-eliteboar...z/SaMMyMaster/

[Tuci-Puci]

oscam-svn11704-samsungtv-webif-dvbapi

OSCam ver: 1.20_svn rev: 11704 target: arm-v7a8v3r1-linux-gnueabi
| Tools:
| CROSS = /opt/s3/support/toolchains/samsungtv/bin/arm-v7a8v3r1-linux-gnueabi-
| CC = /opt/s3/support/toolchains/samsungtv/bin/arm-v7a8v3r1-linux-gnueabi-gcc
| Settings:
| CONF_DIR = /mtd_rwcommon/oscam
| CC_OPTS = -Os -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lcrypto -lm -lpthread -ldl
| UseFlags = USE_LIBCRYPTO=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING WITH_DEBUG MODULE_MONITOR WITH_LB
| Protocols: CAMD35 CAMD35_TCP CCCAM CCCSHARE
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs :
| Compiler : arm-v7a8v3r1-linux-gnueabi-gcc (VDLinux.GA1.2012-10-03) 4.6.4
| Config : build/arm-v7a8v3r1-linux-gnueabi/config.mak
| Binary : /opt/s3/support/binaries/oscam-svn11704-samsungtv-webif-dvbapi-upx

[Tuci-Puci]

gorgone/s3_releases

s3_releases

for a simple simple console cam
perform the following
für eine einfache einfache console cam
folgendes ausführen
./s3 checkout
./s3 native
for a simple simple console cam with emu
perform the following
für eine einfache einfache console cam mit emu
folgendes ausführen
./s3 checkout
./s3 update_emu
./s3 enable_emu
./s3 native
unter support/software kann nun andere software cross compiliert werden in dem beispiel mit _vlmscd ist dokumentiert wie die compilierung zu erfolgen hat
under support/software other software can now be cross compiled in the example with _vlmscd is documented how the compilation has to be done

[Tuci-Puci]

Oscam_Auto_Compile

# Oscam_Auto_Compile
Cross-Compile Oscam build from svn Streamboard

sudo -i && cd /tmp && wget https://github.com/sharillas/Oscam_A...autocompile.sh && chmod +x /tmp/oscamautocompile.sh && ./oscamautocompile.sh

[Tuci-Puci]

all Cams For Gemini Enigma1
all Cams For Gemini Enigma2
all_Config__For_Gemini_Enigma2
e2-mipsel-camd3.908L_090811