KAON firm missmatch

[wahab07]

looks like this for me

UPGRADE TOOL (V2.30) 22-MAR-2004 Patch
File open O.K.!
> Old version binary.
-. Target loader version :L 619
-----------> Front :: 74HC164 used (connector: 14pin)
-----------> Target 2M Flash.
-----------> Target AMD/ST FLASH(TOP).
Connect Success
//======================================== ==========
// FileInfo: AT-7010DCIZ, H/W(12.C1.A5), S/W(02.00.07)
// Target: L 619, u-C[0] , FLS[2M], KSC-570, H/W(12.C1.A5), S/W(13.05.04)
//======================================== ==========
Target Model Mismatch : KSC-570
13.05.04: Software Version is High
-. STB Model : AT-7010DCIZ
-. STB H/W Ver : 12.C1.A5
-. STB S/W Ver : 13.05.04
DownLoad Start
:>> flash not ok.RESPONSE_DOWNLOAD_FAIL
:>> ERR: on STB->PC

your problem is that you didnt push the space bar befor opning the file.when you push the space bar you will have engenner mode.try it .

[Thorus]

I'm new here, but I have the same problem with the same receiver (Kaon KSC 570, S/W 02.00.00, H/W12.C1.A5, loader 6.19, C.A 2.2.2). I tryed a firmware but KUP 230 or KUP 300 recongnize my receiver as Kaon 511Z. Which version of boot loader can I use? If you did it, send me please the new bootloader and the firmware. Thanks.

[angelosalamone5]

you need to press spacebar in kup to unlock enginer mode and then there will work

[pr2]

Open the firmware.
Click on the screen where you have the log and presse the space bar.
Engineer Mode must appear.

If you don't have Engineer Mode it will not work.