BISS keys are stored in your PMC Table.
If you have an up-to-date table you should be O.K.
To update your PMC Table you need the PMC Tool software that comes with the Humax Toolbox.
BISS keys are stored in your PMC Table.
If you have an up-to-date table you should be O.K.
To update your PMC Table you need the PMC Tool software that comes with the Humax Toolbox.
How analysis ?....
Attached is an example PMC Table containing BISS keys
To view the contents extract the .csv and open the file using PMC Tool contained within Humax Toolbox.
Scroll down about 5 pages and you will see a whole section devoted to BISS keys.
If you move to one of the lines, say BISS Megasport and double-click on that line you will enter "Edit" mode
You will see a series of boxes that contain the following data:
Type: Should be set to "Ident" from the pull-down menu
Name: Channel Name is entered
ID: Antenna 21 to be selected for all BISS channels
Box 4: Server ID is entered
Box 5: BISS CA-ID (2600) is entered
Box 6: First four digits of key entered
Box 7: Second four digits of key entered
Box 8: Third four digits of key entered
Box 9: Last four digits of key entered
Box10: Box not used
If the key alters, you can over-write the key and then load the amended PMC Table to your Humax
If you want to include a new channel, select the "Insert" key on your keyboard instead of double-clicking for Edit mode. Now follow the same format as described above.
I hope that this makes sense.
BISS keys tv8 to turksat?
Non capito niente amico mio.Se io volio cambiare le ciavi(keys) cambi nel programma Sammy Humy..le bin file., con humax tolbox chi sai e come scrivere le ciavi. Gracie (italiano)
hi
i have mumax va-fox.
pls tell me how to enter keys by remote control.
regards
chandana
Thank You for your very good explanation.
first sorry if my English is not so good.
I have only to remarks:
1st it is possible to view and edit PMCtable via remote control.
Instal --> ToH --> EMC --> PMCT --> Ok .. etc
2nd Updating biss keys and editing using PMCTable Tool and re download to humax receiver does not succede with all channels. such as:
TV8 and Discovery ... on EurAsiaSat 42deg East.
I know tow URLs to get recent biss keys such as RDI sat and Sat-Key.ORG
So what could be the reason?
and if you know other sat resources to get updated biss keys?
with best regards and wishes
happy new year.
when you want to insert the <biss> k*ys in humax 5400z you not insert <biss> k*ys why in humax humax with the <toolcatone> don't have the system <biss> that system is on to the <pmct> and unlock only with pmct
Hi AbuAhmed,
Yes it is possible to edit the PMC Table with your remote control but, unfortunately, the changes are not permanent. When you power down / switch off your Humax the alterations are lost and the PMC Table reverts to its original entries.
Any alterations that you want to keep should be done with the PMC Tool (or similar).
As with all forms of encryption, not all the keys are known. Keeping your PMC Table up-to-date with the latest release is the best method I know. Personally, I prefer the Xamuh PMC Tables.
Another little trick that you might try as a possible alternative source of keys is as follows:
1) Download a Softcam file such as the one attached
2) Extract the file from the Zip folder
3) Rename the file:
Original Name - Softcam.key
New Name - Softcam.txt
4) Double click on the file to open it. Now all the included keys can be read in ordinary text format.
5) Copy any useful keys to your PMC Table or Key File.
Re: HUMAX USER GUIDE (Little HOW TO...)
A big thanks to Trinity for her well informed guide.
I am new to this and i was looking for the this information to start me up.
and this was the best one .
thank you very much.
Posting Permissions
Reply With Quote