tv cabo virgin card

[the peppi]

hi
i got a new card with powerbox
still not activated and the card has not being updated
so the card is still a rom110 rev A01

i want to put it on newcs and then with cs2gbox to gbox
can someone tell me what i need and what i need to do for this

thnx guys

[snot]

hello

well is possible you just need to now the boxkey and rsa and put it on newcs it works just fine believe me.
but for that you need to read the card (take out the rsa) and take out the receiver dump (bk data).
dont forget if you put the card inside it will upgrade the card to ac3 and still no public script to open it .

check here :http://www.satsupreme.com/showthread.php?t=18921

you got all you need to take out the card data ....


best regards

snot

[the peppi]

thnx snot
but the problem is that the link from the topic is all portugese
and i dont read or speak protugese
i do this for a friend of mine and he brought the card and box from portugal

[the peppi]

nobody who can help to get the boxkey out
where are the experts still on holliday

[the peppi]

hello hello hello is there anybody outthere
if you can hear me is there anyone at home ?

[snot]

hello

relax this thing s need pacient and now how .
you don t do it in 1 hour .

1 - to get the boxkey you need a dump of the receiver (octal) to get it you need to now the board revision (the new ones got glue on the processor and the points are hard to get ).
it depends board revision old ones are easy to get just need a jtag and some resistencs.
if you got the new one receivers just start to take out all the glue

2- your card is virgin right never been on receiver and never activated by tvcabo operator ????

3-do you have a subscrition on it ?????

to read the card you got the script on the link i give you above just put it on unlooper and run the reading script it will give you the dump on this dump you get the data .

one more thing use online translator it will help you to translate portuguese ....i use it a lot to other languages

best regards

[the peppi]

@ snot
many thnx for youre reply
because i really don't know how to and i can use all the help i can get
i hope i answer youre questions below and that you have some more tips for me on how to crack this job
just to be shure we are talking about the same thing
i only want to make it work on the newcs and not turn the card into a mosc i think
we want to have the original subscription and pay for it aswell
and then we want to make it work on the newcs/newcamd server

relax this thing s need pacient and now how .
you don t do it in 1 hour .

i know m8 and i have the time for it thats not the problem
only the howto is the problem and since everything is in protugese its very dificult for me

1 - to get the boxkey you need a dump of the receiver (octal) to get it you need to now the board revision (the new ones got glue on the processor and the points are hard to get ).
it depends board revision old ones are easy to get just need a jtag and some resistencs.
if you got the new one receivers just start to take out all the glue

is this the only way to get the boxkey because it is a brand new model
i haven't looked inside yet but i think that it might have the glu inside

to read the card you got the script on the link i give you above just put it on unlooper and run the reading script it will give you the dump on this dump you get the data .

is it not posible to get the boxkey from this dump because i think i only need the boxkey to make it work on newcs/newcamd

2- your card is virgin right never been on receiver and never activated by tvcabo operator ????

no the card is not yet activated so it is a real virgin card

3-do you have a subscrition on it ?????

yes its the standard subscription we got and if it works we want to make it a full one

one more thing use online translator it will help you to translate portuguese ....i use it a lot to other languages

i am sorry to say so but i try'ed it and then from portuges to english that don't work
otherwise it would be better for me to understand the topic you send the link from

[snot]

hello

if you activate the card you get all the data inside ...as a virgin you got nothing there (inside the card i mean at this point)

i got them here running in oficial receivers also on dreamboxs using camd3+newcs and gbox+newcs.
boxkey and rsa is always needed

so the only way is making a dump of the card to get the data ........believe me there s no other way .
make the dump (script and unlooper) after making the dump you must find the dt6 , to calculate the rsa (use progr. expand dt6 ) .all you need is on the link
if you got the rom on AC3 dont worry already public script to ac3 dump

best regards

[the peppi]

hello

if you activate the card you get all the data inside ...as a virgin you got nothing there (inside the card i mean at this point)

if you got the rom on AC3 dont worry already public script to ac3 dump

best regards

aha ok so what you are saying is that if i activate the card then it will become the AC3
and then it has the boxkey and other data on the card
then i can dump it with the unlooper and get the data that i need

and finnaly i can get it to work on newcs if i am correct?
so what i need to do is get the nexus asap or the t911?

[mara28]

"if you got the rom on AC3 dont worry already public script to ac3 dump "

Hello snot,
please ,where to find those scripts??

Regards