Sunny/Kaon AT-7010D Firmware? Bootloader? Please!

[rapalot]

Hello!

I have a Sunny AT-7010D with:
S/W V01.00.01
H/W V12.00.A1
Loader: V.2.1.0

Can someone tell me which firmware and boot loader to use? That would be great.
I already tried many different firms, but it is impossible to unlock the channel lock.
I also tried to load a new boot loader, but nothing at all happened. I tried BL219v4 and KaonTeam BL1.1.9v4.
The only firmware I found and where I can unlock the channel lock is Kaon - Firmware - KSC-570 - HW12.01.A1 - SW0B.00.01 - FR.
It's much better as my original firmware, because epg and time is now working without problems and I can watch O*R*F, but no other crypted channels. I would be great if I could have E@syTv or M*T*V

Which firmware can I use?
Which boot loader is working? It's impossible to load BL219v4 and KaonTeam BL1.1.9v4.

I hope someone is willing to help me. I really would appreciate it!

Thanks

[pr2]

To uploade the firmware try the switch off/on at the back of your Kaon (cold restart) instead of the remote control (hot restart).
This should help you inject the bootloader 2.1.9v4 in your Kaon receiver.

[paardje]

I have exactly the same problem as RAPALOT with my Kaon KSC570 :the only working firm is the 12.01.A1 , all the other firms are impossible to unlock the "channel lock".
I've tried also with BL219V4 even with a cold restart on the back-side of the receiver it doesn't work !!
There must be a solution for this problel I think, anyone has the answer please ???
Many thanks.

[rapalot]

Thank you for the answer!
I also tried it with with cold restart, but that didn't work either.
Is there another boot loader version which is compatible?

[pr2]

Hello,

Sometimes you need to use the bootloader 6.1.8 as a first step, then go to the 2.1.9v4.

Be carefull changing the bootloader can block your Kaon and the only solution will be to use a JTAG interface. I am "specialist" for the 12.03.A5 and 12.C1.A5, not the 12.00.A1.

Never change the bootloader on a PVR ready model (KSC-570H for exemple), the bootloader for those models is specific!

Pr²

[lucky24]

I have the same problem with 570 and HW 12.C1.A5.

I try with bootloader KaonTeam BL2.1.9v4 and doesn't works.

How can I put the BootLoader 6.1.9?

Thanks!

[rapalot]

Thank you for the answer!

You can get the boot loader from here.
There is 6.1.8V1 and 6.1.8V2. Which one is the right one?

How big is the chance to destroy the bootlaoder? I don't want to ruin something and use JTAG. If it's too dangerous I stay with mine.

Maybe someone can test it before.

[rapalot]

Hi!
I managed to laod the BL219v4.
I flashed a firmware frome here. They have the BL210v3 included.
You need to go to key key menu, load default, restart receiver with the backswitch, then you have BL219v3 installed.
Now it should work to flash the BL219v4.

Now I have another question.
Is it possible to load the menu from another firmware.
I really would like to have 0B.00.01. In my opinion it looks best.

[fodil68]

please your " here " don't exist !!!!!

[rapalot]

please your " here " don't exist !!!!!

What H/W version do you have and waht exactly is your problem?