║➽║NCam║➽║NCam_Emu compiled║v.15.8║By READ║

[ALFAJAY]

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # #
# # # # # # 0.1 # 1 Compiled NCAM: 19-07-20012 # # # # # #
# # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

NCAM cardserver v0.1, build # 1 (MIPS, X86)
Copyright (C) 2012 NCAM developers.
This program is Distributed under GPLv3.
NCAM is Based On Oscam

-------------------------------------------------- ----------

Features: pcsc anticascading Webif dvbapi monitor loadbalancing
Protocols: cccam newcamd cccam_share serial cache-exchange
Readers: nagra viaccess dry

-------------------------------------------------- -----------
compiled:

Ncam.mips enigma2 - Mipsel
Ncam.x86 Linux PC (32 bit)

pending

PENDIENTE1 - Ncam.ppc enigma1 - Power PC
Outstanding2 - Ncam.x86_64 Linux PC (64 bit)
PENDIENTE3 - Ncam.sh40 Enigma2/Spark - (Qbox / ipbox / kathrein / Golden Mean)

-------------------------------------------------- ----------

Installation NCAM (Mips):

/ usr / lib /: libpcsclite.so.1, libpcsclite.so.1.0.0 (permissions 755)
/ usr / bin /: NCAM (permissions 755)
/ var / tuxbox / config /: ncam.user, ncam.server, ncam.conf (permissions 755) * the rest is optional

* Optional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist

-------------------------------------------------- -----------

NCAM Channel Install (Linux PC (32 bit):

/ usr / lib /: libpcsclite.so.1, libpcsclite.so.1.0.0 (permissions 755)
/ usr / bin /: NCAM (permissions 755)
/ usr / local / etc /: ncam.user, ncam.server, ncam.conf (permissions 755) * the rest is optional

* Optional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.cacheex, ncam.whitelist

-------------------------------------------------- -----------

NCAM configuration through the web:

NCAM Admin Control: http://127.0.0.1:8181/ (192.168.xx)
user: root
password: ldteam

Thanks lonasdigital team

[dishmantra]

Will a version be released with cardless reader option(enter your own axi,exi etc)?
I would be very interested to test for you as a beta tester.

[ALFAJAY]

######################################## ################
### ###
###### NCam 0.2 #1 Compiled: 22-07-2012 ######
### ###
######################################## ################

NCam cardserver v0.2, build #1 ( MIPS, X86 )
Copyright (C) 2012 NCam developers.
This program is distributed under GPLv3.
NCam is based on OScam

------------------------------------------------------------


 Features  : webif monitor dvbapi pcsc
 Protocols : newcamd cccam cccam_share
 Readers   : nagra seca viaccess videoguard


-------------------------------------------------------------
Compilados:

Ncam.mips    enigma2 - Mipsel
Ncam.x86    Linux PC (32 bit)  

[ALFAJAY]

0.2.1 NCAM Rev.1

Changes:

- Added back the loadbalancing
- Modification of code in internal parts of the NCAM

[ALFAJAY]

NCAM 0.2.2

Changes:

- Added support for Conax cards.
- Rewrite and internal debugging code NCAM.
- Removed the option SCRIPT web.

Thanks lonasdigital team

[ALFAJAY]

######################################## ################
### ###
###### NCam v0.2.2 Compiled: 23-07-2012 ######
### ###
######################################## ################

 NCam cardserver v0.2.2, ( MIPS, PPC, X86, X86_64, SH40 )
 Copyright (C) 2012 LD TEAM.

-------------------------------------------------------------
 Features  : webif monitor dvbapi pcsc loadbalancing
 Protocols : newcamd cccam cccam_share
 Readers   : nagra conax seca viaccess videoguard
-------------------------------------------------------------


Compilados:


Ncam.mips      Enigma2 - Mipsel
Ncam.x86       Linux PC (32 bit)
Ncam.x86_64    Linux PC (64 bit) 
Ncam.ppc       Enigma1 - Power PC 
Ncam.sh40      Enigma2/Spark - (qbox/ipbox/kathrein/Golden Media)


------------------------------------------------------------




Instalación NCam (Mipsel, sh40):




/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional




*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist




-------------------------------------------------------------


Instalación NCam (PPC):


Igual no son necesarias las librerías aquí, si no os la pide no ponerlas.


/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/var/tuxbox/config/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional




*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist


--------------------------------------------------------------


Intalación Ncam (Linux PC (32 bit y 64 bit):




/usr/lib/: libpcsclite.so.1, libpcsclite.so.1.0.0 (permisos 755)
/usr/bin/: Ncam (permisos 755)
/usr/local/etc/: ncam.user, ncam.server, ncam.conf (permisos 755) *el resto es opcional


*opcional: ncam.dvbapi, ncam.provid, ncam.services, ncam.srvid, ncam.tiers, ncam.whitelist 

-------------------------------------------------------------

Configuración de Ncam vía web:

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam

Changes:

- Added binary SH40
- Added binary PPC
- Added binary X86_64
- Does not change the version only, new architectures supported.

[ALFAJAY]

######################################## ################
### ###
###### NCam v0.3 Compiled: 28-07-2012 ######
### ###
######################################## ################

Changes:

- Added support for Irdeto.
- Added support for cryptoworks.
- Modified the part of CCcam, MAX / MIN connections, MAX / MIN ECM / EMM.
- Modified MAXHOP, reshare, IGNRSHR, STEALTH, reconnection times, etc.
- Major changes in general in the CCcam protocol.
- Added support for more number of clients / servers CCcam.
- Modifcados nagravision reader internal parameters (looking for more stability).
- Modified dvbapi reader parameters (looking to improve reading times).

[dreams@t]

- Added versions for mipsel (Gigablue, dreambox, vu +, XTREND, formuler, etc ...) receptors

- Added versions for routers with DD-WRT and mipsel architecture.

- Added versions for mips-uclibc (plus tiviar for example).

- Added versions SH4.

- Added versions PPC (Dreambox DM600 / 7000/7020 / 7020si)

- Added versions PPC-OLD (Dreambox DM500 / 500S & DBox2)

- Added versions cortexa9hf-vfp-neon (wetek play, etc ...)

- Added x86 versions (i686, PC-Linux 32-bit)

- Added x86_64 versions (PC-Linux 64-bit)

[alouan]

NCam-1.1-r2 (Oficial)


######################################## #################################


NCam cardserver v1.1-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).

Source Code: https://github.com/javilonas/NCam
######################################## #################################


**************************************** ********************************
Important notice !!

This is the OFFICIAL version (18.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
**************************************** ********************************


Compiled:


ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


**************************************** ********************************

Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!


**************************************** ********************************


Changelog v1.1-r2:


- Added support for CCcam.cfg native.
- Added new option auto block sid in CCcam.
- Added support for auto restart reader after some time and extend reset cycle for network reader.
- Added friendly output debug message for CCcam.
- Added Support for streamguard.
- Update jquery-3.2.0
- Upgrade reader tongfang.
- Support httputf8 webif (on/off).
- Added latest OScam patchs till the date 18-03-2016.
- Tandberg ecm and emm algorithm fix.
- Added support radegast.
- Added Ping time feature.
- Added MAX accepted ECM time.
- Added Support for never retry failed load balanced things.
- Define which client can use option force reopen.
- Improved logging and enabled debug mode again.
- Live log active.
- Changes in webif status.
- New option of services in the reader to select a reader in priority.
- Added option ECM timeout limit.
- Fix N*D*S CWs are dropped when connected to real CCCam servers.
- Increase to 128 the service limit.
- Increase ECM length and Fix check_sec_len for some large ecm data.
- Fix card matching for prov is 0 in CCcam.
- General Arrays in CCcam Protocol, now works more like the native CCcam.
- Arrangements to reduce blockages and freezes.
- Support for Rasp pi 3 (Prismcube uses this same binary).
- Fixed the problem of anticascading.
- Fix for aggressive-loop-optimizations warnning.
- Add extended allowed timeframe request.
- Accept all providers when provider is not specified
- Add full support for multiport supported by Cs378x.
- add support AES key to dvbapi and newcamd
- Completely reconfigured by default. Do not forget to redo your config.

[alouan]

NCam-1.2-r3 (Oficial)

#########################################################################


 NCam cardserver v1.2-r3, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam
#########################################################################


************************************************************************
 Important notice !!
 
 This is the OFFICIAL version (20.3.2017)
 There are no later versions.
 
 If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
 Be very careful when downloading non-OFFICIAL versions, 
 we are not responsible for those versions or what their authors may have added.
 
 Signed: Javier Sayago (Javilonas)
************************************************************************


Compiled:


ncam.mips                   Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc            Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                    Linux PC (32 bit - i686).
ncam.x86_64                 Linux PC (64 bit).
ncam.ppc                    Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                    Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon    Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian           ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips            Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe             Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


************************************************************************


Changelog v1.2-r3:


- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.


--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me to a beer: https://www.paypal.me/Javilonas

Thx @lonas