║➽║NCam║➽║NCam_Emu compiled║v.15.8║By READ║

[5001]

How can contact Hadu to ncam , like Oscam

Hadu to Oscam contact --> 127.0.0.1 12000 user pass

Hadu to Ncam contact ?

[alouan]

NCam-1.4-r0 (Oficial)

######################################## #################################

**************************************** **************************************** **************
Important notice !!

This is the OFFICIAL version (02.04.2017)
There are no later versions.

If you have downloaded any version, listed as 1.5, 1.6, 1.7, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.

Signed: Javier Sayago (Javilonas)
**************************************** **************************************** ***************

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android ARM (For all api android).
ncam.arm-marvell ARM (Synology DS114, DS214 and similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

**************************************** **************************************** ***************

Ncam settings web::

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.

If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225

**************************************** **************************************** ***************

Changelog v1.4-r0:

- Added support for stapi5.
- New config somewhat more globalized (If you have cuts, adjust the config to your needs).
- Increased values of ECM_FMT_LEN, CXM_FMT_LEN, and MAX_ATR_LEN.
- Compiled with new FLAGS to avoid problems in 4k architectures.

--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal without its corresponding suscription.
You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago),
nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------

If you want to invite me for a beer: https://www.paypal.me/Javilonas

Thx @lonas

[alouan]

NCam-1.5-r0 (Oficial)

#########################################################################


 NCam cardserver v1.5-r0, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
 Important notice !!
 
 This is the OFFICIAL version (04.04.2017)
 There are no later versions.
 
 If you have downloaded any version, listed as 1.6, 1.7, etc ... These are FAKE versions.
 Be very careful when downloading non OFFICIAL versions, 
 we are not responsible for those versions or what their authors may have added.
 
 Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe                     Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.5-r0:


- Added support for i686.exe.
- Added NodeID generator to CCcam.
- Fixed issue reported on new options in loadbalanced.
- Small arrangements in the webif in different areas (little appreciable).


--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas

Thx @lonas

[laitram]

version 2.5

http://www.satsupreme.com/download.php/356337-ncam-2-5

[chistera™]

ncam 2.5 version classic et arm demodulateur 4k ok

[WaRp]

Ncam 7.7 compiled and patched by marouan & READ


-[irdeto] Fixed cw checksum bytes
-[dvbapi + streamserver] Rework audio identification for extended cw
(Removed some stream types from the audio list and added some that were missing. Hopefully this change will fix the rest of the powervu channels that have audio problems. If there are still channels with no audio, please report)

[chistera™]

- Ncam 10.7 compiled and patched by READ
Ncam 10.7 compiled and patched by marouan & READ


-[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor
*This fixes some not ATSC complaint channels reported with no sound.
-HD+ HD05 Card support (tnx pehedima for patch!)
-N.D.S DES/3DES Overcrypt support
-fix bug for wrong decoded classD3 CMD's
-improved Sky DE/CH/AT V14/V15 payload log output
[streamserver] Synced descriptor parsing code with the dvbapi
*This should fix no AC-3 audio on some PowerVu channels.

[WaRp]

Ncam 10.9 compiled and patched by READ


-fix HD03/05 CMD Overflow
-patch provided
-rework code ref gbox_maxecmsend
-clean up some ecm stuff
-Add more option for Cccam. Now you can use (CCcam.cfg) file

################# CCcam with CCcam.cfg ###################
[reader]
label = Server_1
protocol = cccam
= device = /etc/tuxbox/config/CCcam.cfg
inactivitytimeout = -1
reconnecttimeout = 12
group = 3
cccversion = 2.0.11
ccckeepalive = 1
cccmaxhops = 2 # dont use higher than 3 !!!
disablecrccws = 1
cccwantemu = 1

[dreams@t]

NCam-10541 For IRON/PLUS/PRO/ICE

- Add repetitions_forced option (#16)
-This option allowed to Enable/Disable the ncam to read same Cline servers from both file (ncam.server and CCcam.cfg)
-The default option is (enable) you can change it from webinterface of ncam (http://deviceip:8181/config.html) then (Repetitions forced:)
or from ncam/config file to change value to (0)
10541
Multics Hellboy detect

[stv2008]

enigma2-plugin-softcams-ncam_V11.3-r0_all.ipk
enigma2-plugin-softcams-ncam_V11.3-r0_all.deb

NCam v.11.3
Changelog:


    -[powervu] Fixed emm algo
    -Add emu BISS2 (Beta Test)
    -repeat to ask all gbox readers again during fallback time (Thank’s chimpie232)

arm-linux