HOW To "Solved Problems" For All Receiver

[sghaier ayoub]

thank you for your help -that s a good job man

[urmans]

HUMAX

HOW To Add A new Key for Biss Channel

Go To Biss Codes
[Menu --> TOH --> Parser --> Ram Editor --> Press On Radio]
Go To Empity Line
00000000000000000000
Press Ok
Write The Code
Press OK

[urmans]

Echosmar

How to enter code on Echosmar 2440

Menu + Preference + Language Settings + Ok
+ Buton Rouge (Save) + 9999 *

====================================
Echosmar DS-1230

After instal new firmware please do:=> menu + stb setting + mute + 666

====================================
Echosmar 2340

menu+info sys+8888+ bouton rouge 2 times
=====================================

[urmans]

DIGIWAVE
********

This is the detailed manual KEY CHANGE for your DIGIWAVE/DW-7000 / 7200
First get the new keys

For DISH, they are N0101 00 (key 00) and N0101 01 (key 01)
For BELL they are Key 86 (key 00) and Key 96 (key 01)

Turn on your DW.

Select MENU, USER INSTALLATION, SYSTEM SETTING

Press RED button. You are now in the Key Edit section.

Right to NAGRA2 (not NAGRA)

Down 1 to PROVIDER

Right to 0001 DISH NETWORK (or 0801 BELL EXPRESSVIEW)

(Note: Normally only 1 key is changed. If 1 set of keys (00 or 01) is the same as you see, you don't need to do that key. IGNORE any other keys below 00 and 01)

Down to Key 00 (or 01) and press ENTER

Enter the 16 pairs using the 0 - 9 buttons and scroll left/right+ ENTER for A, B, C, C, D, E & F.
The < at the right is to DELETE last entry.
DO NOT use spaces.

When all 16 are in the OK/CANCEL will appear.
Double Check your inputs.

Press OK.

Down to SAVE KEY, press ENTER

Repeat above for Key 01 if BOTH keys need to be changed.

When done, EXIT out. Channels should come back on in a few seconds.

[urmans]

How Do I get into the Keys Menu?
(Ariza) Extreme

1) Press the MENU button on your remote. See: Pic 1
The menu options will pop up as shown.

2) Using the > button on your remote, go to the Advance option. See Pic 2

3) Using your remote Press Quickly key 1234.
Your TV should look like Pic 3

4) Use the UP/Down arrow than select NagraVision or others.
Your screen should look like Pic 4

Warning!!!: Make sure you know what to do and which key you want to edit.

[chouchou]

Hi guys,

I really appreciate wat ur doin.
I'm new. Can anyone tell me how to manully input codes in Hivion 9090x?

1- MENU
2- STB
3- 1234

[urmans]

With the latest software dated 13-6-2008 Master PIN Strong & Sky X change from 0103 TO 3010

[silviu_zaharia]

how to decript CRYPTOWORKS on a XCRUISER XDSR 300??Its simple!!!Go to parental lock,enter the code 3333,press the red button,after exit with MENU key.Guarantee will work,i tried it on six recivers for the channels on sirius 4,HUSTLER,ESPN,ROMANTICA,etc

[satpalchat]

can you please advice how to edit the code of Supernet 488 / supernet 488a or Space 480

tnx

[satpalchat]

SRT3620 & 3630

To Edit the code key press the number 8282.
Enter the code 6969 two times each time coming from main power OFF/ON and the unit will open the scrambled channels.

TO EDIT PROVIDER ID OR ADD NEW KEY
PRESS MENU GO TO INSTALLATION/INFORMATION then
PRESS "FUNC"KEY 4 TIMES.

TO RESET OR INITIALIZE THE KEY CODE OF
PRESS "MENU" then
GO TO "SYSTEM INFORMATION"
PRESS "FUNC" KEY 4 TIMES then
PRESS "0"

How about Strong SRT3735 ?????