Oscam Mod :DOScam - (by depp0ns ) with emu

[ALFAJAY]

New update 09.12.2012

Oscam Mod :DOScam - (by depp0ns )with emu

V0.06

- Fixed ABSat

[alouan]

here is a new version with some changes.

So far (as of V0.03) contained the following changes from the mod original Oscam:
- Cryptoworks EMU (e.g. ORF AustriaSat, ARQUIVA)
- Nagra Aladrin EMU (e.g. Digital Cable Free)
- Seca EMU (e.g. RAI)

New in v0.04:
- Via2.6 EMU (for example C-Sat 0500:022610)
- Via3.0 EMU (e.g. TNTSAT 0500:030 B00)
- Conversion to SoftCam.Key
- No mapping for Digital Cable Free longer necessary
- Update to the latest SVN version

The minimum config of the EMU looks like this:

[reader]
label = emu
protocol = constcw
device = /var/keys/SoftCam.Key

Of course, also a Group and other parameters can be added, as seen on her regular readers.
It is definitely advisable with the CAID (s) specified as such a reader-matching occurs and not blindly every CAID will be tried.
Example

[reader]
label = emu
protocol = constcw
device = /var/keys/SoftCam.Key
caid	= 1801,0D05,0500,0100

If e.g. ORF is only seen enough, even 0D05 and the rest can get out. I think the logic behind it should be clear. If despite CAID still problems, it makes sense in the corresponding CAID oscam.dvbapi prioritize. Example oscam.dvbapi for ORF, Digital Cable Free & TNTSAT:

P: 0D05		#ORF
P: 1801 	#Kabel Digital Free
P: 0500:030B00 	#TNTSat

Notes:
- Case-insensitive when device path for SoftCam.Key (case-sensitive)! SoftCam.Key example, is something other than Softcam.key You can see the file we call you want, but it must also be so with device = ... stand.

- TNTSAT (0500:030 B00) uses long ECMs, which are not supported by each protocol. Is locally dvbapi users there of course, but the reader should be shared on the network, then the camd3 or cccam-protocol can be used. With the newcamd protocol, it does not work! Any other station also works with the newcamd protocol.

V0.05:
- Via1 EMU for mezzo-added (0500:007400).
- Raspberry Fix
- Other minor bug fixes

v0.06
- Fixed ABSat

Since libusb apparently for some presents insurmountable problems, I have now also created a package without libusb.

V0.07

- 0x090F ;-)
- BISS

[alouan]

doscam Version 0.18 for others Receiver and Router

doscam Version 0.17 for others Receiver and Router:

It was first created for other platforms Binäries! Welcomes feedback only here!

[General Changes] - Implementation of Viaccess Nanos D2 02 13 /15 ( TNTSAT ) for Smart Card and EMU
- New Default is 1 of unlockparental
- Various bug fixes in terms of stability

[ Zeroconf ]
- Zeroconf Reader HOP1 be = 1 (default when no config) treated the same as local in preferlocalcards Reader
- Zeroconf reader lose virtually seen no more hop if proxy Reader weitergeshared

[ EMU ]
- Changes in the EMU , which mean that when using the CCCam protocol on the client CAIDs all the EMUs are seen as virtual cards WebIf ( 0D00 corresponds to eg all 0DXX CAIDs )
- The virtual EMU cards are created automatically when geshared EMU only to direct peers
- AU disabled for RAI in EMU
- Support ONID in SoftCam.Key (F onidsidpid ) . The old format (F sidpid ) is still supported.

[ CCCam protocol ]
- Fixed bug beta tunnel
- Fixed bug that reshare rules flouted
- Fixed bug where non- CCCam reader even then reshared under certain conditions as a virtual maps if they were offline
- Fixed bug that under certain conditions verhindete AU from the client

[Cool Stream]
- Improved Protocol Type Selection
- > This now also cards like the Millenium card run smoothly . Also, some cards should run faster and more stable than before ( mainly affects Viaccess and Cryptoworks cards)
- Reactivate Reader at T1 Command Error
- Improvements in the CoolAPI

Version 0.18

[Dvbapi]
- Fixed any possible duplicate requests

[alouan]

Docam v0.18 for:

- Dbox2 and DM500s
- Coolstream HD-1
- Coolstream HD-2
- RaspberryPi

[Dvbapi]
- Fixed any possible duplicate requests
[Cool Stream]
- Fixed possible crash on Coolstream devices

[chris_jack_luc]

We need doscam V0.19 to open the HD-Channels of tntsat.

The Kyng-Team have achieved it with emu on Atlas HD 100 and 200.

[dias7]

can you add version for pc linux 32 please

[merlin9930]

bonjour
ca fonctionne sur dream 500hd
merci
@++
merlin

Hi
It works on dream 500HD
thanks

[chris_jack_luc]

Because oscam is still not able to read the tntsat-cards, it would be very nice if we can get doscam V0.19 to open the HD-Channels of tntsat ... for christmas

[knasson]

As you seem to still believe in Santa Claus ask him to put an Atlas HD200s in you shoes!

[alouan]

Docam v0.19 for:

- Coolstream HD-1
- Coolstream HD-2
- Dbox2 and DM500s
- RaspberryPi
- doscamV0.19.zip :

        doscamV0.19-dmppcold-webif
        doscamV0.19-fritz72xx-webif
        doscamV0.19-fritz73xx-webif
        doscamV0.19-marv_6281-webif
        doscamV0.19-mipsoe20-webif
        doscamV0.19-openwrt24-webif
        doscamV0.19-tplink-webif

        doscamV0.19-armv6-webif-libusb
        doscamV0.19-fritz72xx-webif-libusb
        doscamV0.19-fritz73xx-webif-libusb
        doscamV0.19-marv_6281-webif-libusb
        doscamV0.19-mipsoe20-webif-libusb
        doscamV0.19-openwrt24-webif-libusb

- Oscam.conf , oscam.server and oscam.user were combined to doscam.cfg
-> All the other config files have been renamed as follows :
doscam.dvbapi
doscam.srvid
doscam.services
doscam.tiers
doscam.guess
doscam.whitelist
doscam.provid
doscam.ac

- Pin codes can be defined now in doscam.cfg under [ pincode ]
-> Format: HHHHHHHHHHHHHHHH : XXXX (H = Hexserial , 8 digits and Webif under the Entitlements to read, X = 4-digit pin)
- > Example of map with Hexserial 0000AABBCCDD0000 and Pin 1234 :
[ pincode ]
0000AABBCCDD0000 1234

- AES keys can be defined now in doscam.cfg under [ crypto ]
- > Format for AES Keys : A: CAID : provid : keyid : aesKey
-> The A stands for AES. Later there will possibly be other things in [ crypto ]
- > Example 0500:030 B00 :
[ crypto ]
A: 0500:030 B00 : 0D : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

- Rate limits can be now defined as in doscam.cfg under [rate limit]
-> Format: CAID : [ provid ]: [ srvid ]: [ chid ] : Ratelimitecm : Rate Limit Time (ms): Srvidholdtime (ms )
-> Entries in square brackets are optional
- > Example of 0100:00006 A for all SIDs :
[rate limit]
0100:00006 A ::: 4:11000 :

- New Reader Parameters " slots " which to define it in a quad Mouse, MCR and similar devices superfluous , for each slot a reader
-> The device must always only the first slot are specified
- > Example of operation with a quad Mouse ( 4 slots) :
[ reader]
label = quad
protocol = mouse
device = / dev/ttyUSB0
slots = 4
group = 1
- > Example of operation with a MCR8 (8 slots) :
[ reader]
label = MCR8
protocol = sc8in1
device = / dev/ttyUSB0 : 1
slots = 8
detect = cts
group = 1

- Improvements in the DVBApi for request_mode = 1
- Improvements in the automatic recognition of internal slots
- Bug in CCCam protocol now fixed , which could lead to freezers
- Now fixed a few rare segfaults
- Adjustments in the T14 protocol for Coolstream devices
- New BISS format ( ONID sid VPID ), for example F onidsidvpid 00 XXXXXXXXXX XXXXXX
- Gbox protocol adapted so that it remains compatible with the OSCam (long ecm support and gbox_my_password under [ gbox ] instead of [ reader] )
- CacheEX , CSP and CW Cycle check from the code