Doscam for coolstream

[mile kristo]

doscam for coolstream

Version History:

V0.01
- Cryptoworks EMU
- Camd3.keys format

v0.02
- Nagra Aladin EMU (mapping necessary for KD Free)

V0.03
- Seca EMU

v0.04
- Via2.6 EMU
- Via3.0 EMU
- Conversion to SoftCam.Key
- No mapping for Digital Cable Free longer necessary

V0.05
- Via1 EMU for mezzo-added (0500:007400).
- Raspberry Fix
- Other minor bug fixes

v0.06
- Fixed ABSat

v0.07
- SoftNDS EMU (CAID ViaSat 0x090F)
- BISS

v0.08
- Fixed buildconfig
- Irdeto2 EMU

v0.09
- Irdeto2: fixed caid 0x0603
- Nagra2: added support for provid 0x7301 (and probably others)
- Nagra2: fix for big endian systems
- Possibility to delay added controlword
-> Example: device = / var / keys / SoftCam.Key, 100
-> The example above delays the cw for 100ms
-> Allowed values ​​between 0 and 2000

v0.09
- Svn update

[mile kristo]

V0.09
- Irdeto2: fixed caid 0x0603
- Nagra2: added support for provid 0x7301 (and probably others)
- Nagra2: fix for big endian systems
- added possibility to delay controlwords
-> example: device = /var/keys/SoftCam.Key;100
-> the example above delays the cw for 100ms
-> allowed values between 0 and 2000

V0.09
- svn Update

V0.10
- Seca AU (RAI)
- EMM keys (primary and secondary masterkey) needed in SoftCam.Key, e.g. S 0030 XX YYYYYYYY

V0.10
- svn Update



the minimum config of the emu looks like this
Source code
[reader]
label = emu
protocol = constcw
device = /var/keys/SoftCam.Key

[mile kristo]

V0.10
- Seca AU (RAI)
- EMM keys (primary and secondary masterkey) needed in SoftCam.Key, e.g. S 0030 XX YYYYYYYY

V0.10
- svn Update

V0.11
- DRE Crypt EMU
-> key format: D AAAABB CCDD XX...
-> D = DRE Crypt
-> AAAA = caid
-> BB = provid
-> CC = keyset
-> DD = keyid
-> XX... = key
-> example: D 4AE111 3B00 24....CA
- modified "cccwantemu = 1" for doscam purposes

the minimum config of the emu looks like this
Source code
[reader]
label = emu
protocol = constcw
device = /var/keys/SoftCam.Key

[mile kristo]

From V0.11 should for connections via cccam ext doscam to be set on the client reader to the following entry ID entries to avoid on the server:

[alouan]

doscam Version 0.12 for Coolstream and RaspberryPi

DOSCam V0.12 "Fasten Your Seatbelts"
-> From now on is the DOSCam their own way and not the official SVN builds on the OSCam.

[general innovations]
- From now on DOSCam works perfectly without config.
- Implemented New Car beta tunnel can also tunnel EMMs.
- WebIf runs by default on port 8080.
- Monitor service runs by default on port 988
- There is a user created automatically monitor: monitor, password: monitor
- Monitor and WebIf are by default only accessible from the LAN.
- If everything goes customizations with a Minimalconfig [see comments]

[Dvbapi]
- Automatic detection Boxtype
- Newly implemented dvbapi with new request_mode new request_mode = 0 and = 1
- Request_mode = 1 is the new standard [Exception: dbox2 uses the mode0]
- Freeze free CAID changes in both modes, when a reader not found or provides a network reader loses the connection.
- Also Multicrypt channels can be decoded without oscam.dvbapi.
- New thread Coolapi Channel & Handling
- EMM on Free2air channels
- No-create the dvbapi Users longer necessary: it is automatically created with AU rights for all readers
- The parameter decodeforever was removed. The cam never ceases to decoden.

[Reader]
- No definition of internal readers more necessary.
- AU and emmcache automatically activated.
- Automatic card detection
- Automated ins7e11 for videoguard cards
- Boxid VideoGuard card by default 12345678
- For the most common Nagra cards no indication of RSA and Boxkey is necessary.

-> S02/D02 run in encrypted mode. For the Nagra mode (eg D09 mandatory) must be set in oscam.conf following:

[global]
lb_auto_betatunnel = 0

- ORF ICE runs without config in the internal reader by default in encrypted mode.
- For external users / Sharing: slot1 is in group = 1, Slot 2 is in group = 2

[EMU]
- Improved EMU integration
- No EMU reader is configured, the SoftCam.Key is expected in the standard Configverzeichnis (on the Coolstream: / var / tuxbox / config /) or in the directory that was passed with the-c parameter at startup.
- Even without config can be further sharen the EMU, it is in group = 64
- EMU will also be answered beta tunnel requests.

[Notes]
- In principle, the creation of the server in oscam.conf and externern users in oscam.users is only necessary when a server operation.
- In principle, no config is necessary in a client mode, unless you use an external reader, which must be defined in oscam.servers.
- If everything goes customizations with a Minimalconfig:

-> Example 1: The user wants to change the port from 8080 to WebIf 3,001th Suffice following config in the oscam.conf:

[webif]
httpport = 3001

-> Example 2: The user wants slot1 "Sky" means:

[reader]
label = Sky
protocol = internal
device = 0
group = 1

-> Example 3: Creating an external reader:

[reader]
Label = Extern
Protocol = sc8in1
device = /dev/ttyUSB0:6
Group = 1

[guitarfreak]

Can a binary for doscamV0.12 be used for dreambox?

[mile kristo]

Added support for Kronos platform: CoolAPI -
- Video Guard: certain APPs are due to the pairing automatically blocked (untested!)
Added Viaccess AU (TNTSAT E1 / E2): EMU -
-> M-Key is required in SoftCam.Key
-> Example: V 1A D00040 M0 ... 58

[mile kristo]

some bug fixes (AU G09, V14 Freezer, various little things

[tedy58]

Can be found somewhere the sourcecode of the public version of doscam?