Archive

[RYU81]

I change ID my humax 5400 with humax ID changer to update with new loader but after update it ,is not booting and show me nothing,I see only clock on humax.is there way to recovery??help me

[alecos]

insert astra-hotbrid seting is hnf file

[RYU81]

how to do that?or send to me file

[Andreas0109]

i have foud every day new keys for tps and d+, in which line i have to fill in??

The first grooup of 8 hex number at 03 line and second group at the 13 line
( config - parser - raw ediror - upper arrow ( 8 times ) -ok

[invator]

this is true. same problem for me. sometimes take the new keys but mostly not.

[theman2b]

Hi there,

As far as my experience goes, you only have to have a working Irdeto-type card, either gold or fun, and then upload the key.bin into the machine. Once the card works , leave it in the 5400 and only upload new firmware or key.bin via the serial connection.
My system has an old goldcard in there. It is working over a year now , and I never removed it. Do make sure that if you have new firmware uploaded, that the config is pointing to card+emu , not just card. That should normally work . Hope you have any luck

[shibbi88079]

I have the following settings,

Humax IRCI-5400Z

H/W Version OAK I&II 2.1
S/W Version AzIC 1.05.05
Loader Version 4.15.12.16003
System ID 0102.0600
Current service DISN

Question is can I just do a serial update using the toolbox ???

Shibbi...

[shibbi88079]

Ok,

I have found that I have the original loader!!

So no non humax firmware...

I need to do a loaded change to allow any firmware.

Next question, do I have to use the Z-Board or is there a jtag connection on board?

Shibbi...

[hawana]

Well i recommend you to change your system ID to 00160600 and then change your loader to H2.08 and then you can put ToH3.4_Hot7.5 with the latest PMCtable (i recommend Xamuh PMCT) and the latest key.bin that's it.
Best regards and have fun.

[wadi111]

I entered the latest key for BBC Prime (ToH, Parser, raw editor) . I see a few seconds of programme and then the screen goes blank for minutes and comes back for seconds.

Any explanation. Where best to get BBCPrime key and how to enter it. Thanks.

Humax 5400z (ToH 3.4 Hot 7.4)