M-Vision Firmware

[jcsam]

.....

[totox69]

Firmware MVision FS-8000/8080 e+: SRG AU Premeire OK

Firmware M-vision FCIS 9080 USB: SRG AU Premeire OK

[totox69]

G'Day All

Cryptoworks emu changes
ORF betacrypt/cryptoworks problem solved
Roadrunner 2 v1.3 (N2 smartcard reader). SK11
Premiere and SRG Swiss keys updated
SRG Swiss AU OK
Other improvements

Amicalement Totox69

[totox69]

G'Day All

New V 6.15 as :....BK......
6.15
----
keys editor usb improvements
seca3 smartcard EMM changes
usb softcam.key bugs solved
Other improvements. RC, KD

Anicalement Totox69

[totox69]

G'Day All

Updated on 11.05.2007....BK....
V 6.12
as:
6.16
----
Based on new official release
Added support for new N2 D+ 4102 provider


Amicalement Totox69

[Bouzi]

MVision FS-8000 and 8080 e+ TPS AU ok

[totox69]

G'Day All....bk......


USB and old releases
====================
If you get an "err 9" trying to update the software, delete every file into your USB memory but the right .upb file (this is because a bug from older releases).

TPS AES AU
==========
Be sure to search for or to have into your channels list some Hotbird TP 10873 channel (for example, M6 Music Rock) to get AU AES TPS working (you don't need to switch to that channel, just having it into your channels list).

mnet from USB
=============

- mnet.cfg file from USB
Go to Installations, network, IP Setup
Press red key "mnet.cfg". The "mnet.cfg file will be loaded directly from USB
Refer to mnet.cfg file sample for more info

mnet from network howto
=======================

- mnet.cfg file from network
Go to Installations, network, IP Setup
Press blue key "mnet URL" and input the Internet or local network address where mnet.cfg file is located
You can use arrow keys to select characters and you can enter numbers directly pushing the numbers at RCU
FAV key is "." and SAT key is delete
Press yellow key "download". The "mnet.cfg" file will be loaded directly from Internet
This should be specially useful for 9080NET users, without USB. This way the can install big mnet.cfg files
just setting manually IP data and reading the whole mnet file from network

NET keys howto
==============

- softcam.key keys (file name is softcam.key)
Go to "smartcard", "keys editor"
Press blue key "Keys URL" and input the Internet or local network address where softcam.key file is located
You can use arrow keys to select characters and you can enter IP numbers directly pushing the numbers at RCU
FAV key is "." and SAT key is delete
You'll find a softcam file at: , or use your own one
Press yellow key "NETKeys". The "softcam.key" file will be loaded directly from Internet

USB keys howto
==============

- Nagravision 2 cards data (file name is bk.txt or rsa.txt)
Go to "smartcard", "nagra boxkey"
Select bk + key0d or bk + rsa mode
press green key for usb load&save or input manually and press yellow to save
- USB keys for nagra2 (file name is nagra.txt)
Go to "smartcard", "keys manager", "nagra"
Select provider
Press green key. "nagra.txt" file will be loaded
- softcam.key keys (file name is softcam.key)
Go to "smartcard", "keys editor"
You can update all the keys using the well known softcam.key file
Press green key. "softcam.key" file will be loaded

File format:

You can use any character different to "A-F" and "0-9" as separator, so:

------------------------
1122334455667788
------------------------

it's the same as:

------------------------
11 22 33-------445
5
66.////xxxx7 788
------------------------

For bk.txt:
- First 8 bytes are boxkey
- Following 24 bytes are key0D

For rsa.txt:
- First 8 bytes are boxkey
- Following 64 bytes are RSA

For nagra.txt
- First 16 bytes are key0
- Following 16 bytes are key1
(so, if you wish to update just key1, first write 32 zeros (16 bytes) )

For softcam.key
- Use standard softcam.key file


////////////////////////////////////////////////////////////////////////////////


Roadrunner 2 v1.3
=================

What's new
----------
1.3
---
n2 smartcard reader improvements

1.2
---
BK and Key0D can be updated from USB (use a file named bk.txt)
BK and RSA can be updated from USB (use a file named rsa.txt)
-----------------------------------------------------------------------

Roadrunner 2 v1.2
N2 smartcard ready !!!

Go to Setup, Smartcard, Nagra Boxkey
Input your BK and Key0D from card
Push yellow button to store changes and wait 5 seconds to finish
Push green key to read BK and Key0D from USB (they will be stored automatically too)
If you prefer to use RSA mode, push blue key to switch to BK and RSA mode and then push green key to read BK and RSA from USB (they will be stored automatically too)
Exit
Enjoy

Blocker mode:
Select smartcard, option, nagra card and emu AU: ON (some EMMs will be sent to card allowing it to upgrade) or
nagra card and emu AU: OFF (this is default mode, blocker enabled, no EMM at all will be sent to card)
If you're using a modified smartcard use nagra card and emu AU: ON at your own risk

If no decryption, switch off and on again and/or extract and insert again smartcard from embedded card reader

This release should work fine, but
if you experience some "blackouts" change your provider ID at emulator's keys menu, for example: if D+ card, change provider nagra 4101 to 5101 or
set card and emu AU: OFF or
change to "only smartcard" mode (5555) and swith off and on your receiver. You only need "smartcard and emulator" mode (9999) to insert your BK and key0D, after that you can switch to "only smartcard" mode

Remember the modes:
0000 - Smartcard and emulator OFF
5555 - Only smartcard
6666 - Only emulator
9999 - Smartcard and emulator

[chouchou]

Section cleaned.
The posts which don't contain firmware were removed.

[totox69]

G'Day all

ATENTATION ONLY FOR:
F-FS8080 ; FS 8080 Combo
8085 Series
9080 Usb ; 9080 Usb Combo
9085 Net ; 9085 Usb Combo
MV

6.19
TPS AU

Amicalement Totox69

[amar105]

Direct update (don't use it if your receiver has a release < 6.17 or < 1.31):