DVBWorld HD CA+ CI USB box
Key Features
Support DVB-S Protocol (EN 300 744)&DVB-S2 Protocol (EN 302 307)
Support DVB-Data Protocol (EN 301 192)
Universal Serial Bus 2.0 Standard
Digital Satellite TV and Radio Program Receiving
HDTV (MPEG2&MPEG4/H.264)playing
Real Time Digital Video Recording (DVR) and Scheduling Recording
Time-Shifting
Electronic Program Guide (EPG)
Still Frame Capture
Multi Free Channel Preview
Subtitle
Satellite / Transponder Auto Scan
IP PID scanning, IP data broadcasting in LAN
MPEG2 Video broadcasting in LAN, Generate IP data broadcasting task automatically
IP MPEG4 media playing, IP MPEG4 media recording
Internet via Satellite
DVB data service
High download speed via satellite bandwidth
Favorite List
Full Screen Display
Multi language Switch
MPEG-II Software Decoding
Software Upgradeable
DiSEqC 1.2 / USALS Support
IR Remote Controller Available
Perpare CA & CI Modul Upgrade interface
System Requirements
Microsoft Windows 2000/XP/Vista
Desktop or Notebook
P3 500MHz CPU or above for SDTV
P4 2.0GHz CPU or above for HDTV
128M RAM for SDTV / 256M RAM for HDTV
VGA Card with at the least 16MB Memory
One Free USB 2.0 Port
Microsoft Direct X 8.1 or above
Digital Satellite Dish & LNB
Tuner
Input Terminal: F-type 75 Ohm
Receiving Frequency: 950~2150 MHz Tuning Range
Input Level: -75~-10dBm
Carrier Capture Range : ±5MHz
Ambient Temperature: 0°C to +70 °C
Support MCPC and SCPC
Demodulator & FEC
DVB-S
Symbol Rate: 2~45Msps
QPSK filter: Root-raised cosine filter with roll-off 0.35
Punctured codes: 1/2,2/3,3/4,5/6,7/8 and Auto
DVB-S2
Symbol Rate:2~30 Msps
FEC QPSK:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK:3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB & Switch control
LNB Supply Voltage: 13V/18V with Short Circuit Protection
DiSEqC: 1.2
Support Data Burst & Tone Burst
Antenna and LNB Control: 22KHz Tone
Max. LNB Supply Current: 450mA
USB Interface
Universal Serial Bus 2.0 Standard
B Type USB Female Connector
De-Multiplexing
No. Section Filtering: 32PIDs
Engine: Software
Stream Capture: PES &TS
A/V Format
Video Format: MPEG-II Main Profile& Main Level
Audio Format: MPEG-II Audio Layer I & II
Power Adaptor
AC Input: 100 – 240 V ~ 50/60 Hz
DC Output: +9V 2.0A
Options
IR Remote Controller
If User purchased a CA reader , the CA reader is magical CA reader ,it can read original smart card, like Irdeto ,Viaccess, Conax ,Nagravison,Seca…
If User purchased a CI modul ,the CI modul can support the list CAMS:
Compatible CAMs (Conditional Access Module)
Compatible CAM Version
AlphaCrypt 1.0
Aston I 1.05
Astoncrypt 1.03
BataCrypt 1.0
Conax 4.0/4.00e
Cryptoworks 1.0/12011
Irdeto 1.06/2.09
Nagravision All
Pentacrypt 1.05
SECA I & II 1.05
Viaccess 1.0 V481/ V483
Zeta Cam N/A
MAC OSX drivers for DVBWorld
--------------------------------------------------------------------------------
DVBWorld DVB-S2102 and DVBWorld HD DVB-S2 2104 USB Box
1. What's this?
This is a dvbs2 demo driver running on iTele. What's iTele? It's a free dtv-software of mac os x. More about it, please google "iTele". You will find a man who is eating fruit and looking at you, how do you feel? And I feel that the gay is so cool and hackful.
2. How to load the driver?
Please load the the driver by the following steps:
a.open a unix terminal
b.type "sudo cp -R s2_2104.kext /tmp"
c.after enter your password, type "cd /tmp"
d.type "sudo kextload -t s2_2104.kext"
e.plug in the device.
3. How to scan and play program by iTele?
Because iTele only supports DVBS, not DVBS2.And you know, DVBS2 receive operationmode is multifarious, such as NBC-QPSK 3/4, NBC-8PSK 9/10. So I think out a lazy idea to input the parameter. the rule is the follwing. If you what to lock some transpond of DVBS2,and the parameter is like this: frequency:12530000000
symbolRate:14000000
polarity: Horizontal
receive operation mode:NBC-QPSK 3/4
but iTele only provide 3 parmeter(frequency, symbolrate,polarity). So you can add the receive operation mode into the frequency like this:
frequency:12530000134 (134 --> 1 means NBC-QPSK, 34 means 3/4)
symbolRate:14000000
polarity: Horizontal
here is another sample : 12530000290 ( 290 --> 2 means NBC-8PSK,90 means 9/10 ), please edit the locationTunerParams.plist by this rule,(see s2_parameter_show.png)
if 000, iTele will lock the transpond as DVBS.For more help, please refer to the help-picture. When locking ok, and scanning some programs, there is a problem. Some program video format is H264, and you must look for some decoder,For more infomation please refer to "http://defyne.org/dvb/iTele.html".
1.the MMInput2102 is a driver of USB2102 DVB -s device on Mac OS X 10.4.x or above.
2.It supports iTele.
3.load the driver by the following steps:
a.open a terminal.
b.copy the driver to /tmp.
sudo cp -R MMInput2102.kext /tmp
c.load the driver by the flowing command:
cd /tmp
sudo kextload -t MMInput2102.kext
d.plus in the device.
e.test it by iTele.
USB 2102 Support MAC OSX driver
DVBWorld HD DVB-S2 2104 USB Box MAC OSX Driver
Updated 26.10.2008:
Drivers now included in kernel branch 2.6.28
If you did not find suitable drivers there, feel free to use link: http://mercurial.intuxication.org/hg/s2-liplianin
Updated 15.09.2008:
Drivers now included in Steven Toth repository with new S2 API proposal on Linuxtv.
http://linuxtv.org/hg/~stoth/s2/archive/tip.tar.bz2.
Hope soon they will be included in Linux kernel.
Remember, if you did not find suitable drivers there, feel free to use old links.
Updated 20.08.2008:
Velcom to Sourceforge!
http://liplianindvb.sourceforge.net/.
If you did not find suitable drivers there, feel free to use old links.
Updated 07.07.2008:
Version for 2.6.26 kernel and/or latest v4l-dvb. dvblipl07072008.tar.bz2.
Updated 01.07.2008:
Bugs clean. "i" instead of "j" causes driver to hang computer when loading. Thanks to Chris from Cape Town, South Africa. dvblipl01072008.tar.bz2.
Updated 15.06.2008:
TeVii S600 & S400 experimental drivers (not tested yet) dvblipl-tevii.tar.bz2.
Updated 15.06.2008:
Hint for infrared remote. Fixes input device by symlink it. Replace "0x109f" with your card VendorID. root@vdrbox:/etc/udev/rules.d# cat 55-local.rules
# My remote. Add Igor M. Liplianin
KERNEL=="event*", ATTRS{vendor}=="0x109f", SYMLINK="input/irremote"
Start lircd: /usr/local/sbin/./lircd -H dev/input -d /dev/input/irremote
Updated 01.05.2008:
Replace archive with new one. Last one was actually gzip format. Now it is truly bzip2 dvblipl06042008.tar.bz2.
Updated 06.04.2008:
Added TV878DS experimental support. Take file: dvblipl06042008.tar.bz2. If You own this card, feel free email to liplianin-at-me-dot-by testing results.
Updated 03.04.2008:
LIRC configuration instruction. In lirc source directory: ./configure --with-driver=devinput
make
make install
Investigate satellite card input device number: cat /proc/bus/input/devices
Find output lines like this: ..........
I: Bus=0001 Vendor=0001 Product=2002 Version=0002
N: Name="DVB on-card IR receiver"
P: Phys=pci-0000:01:01.0/ir0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=3180 0 55007 d30b4fff
..........
Start lircd: /usr/local/sbin/./lircd -H dev/input -d /dev/input/event4
You'll need to make sure the evdev module is loaded.
Updated 23.03.2008:
Driver for 2002/2102 cards, which do not needs to patch kernel or v4l-dvb. Take file: dvblipl.tar.bz2. Tested with linux-2.6.24.3. Simplified install:
tar -xvf dvblipl.tar.bz2
cd dvblipl
make
make install
This installs modules dm1105.ko and dvb-usb-dw2102.ko.
Updated 22.03.2008: Patch for linux-2.6.23.12. dvb-igorlipl.diff. Tested also on linux-2.6.24.3. LIRC config file for remote control support:lirc.conf. Do not forget firmware for USB card http://liplianin.at.tut.by/dvb-usb-dw2102.fw.
Any donations:
Z340745843664
(c)Copyright. Igor M. Liplianin. 2007, 2008
Hot DVBWorld PCI-Express DVB-S2 Card
DVBWorld DVB-S2 PCI-E CA&CI TV card is one of the best solutions for you to enjoy Satellite paytv with subsribe smartcard shows on your PCs.DW2005 supports HDTV, Digital Radio, Internet via Satellite, and many other powerful features. The high-tech silicon tuner has a longer life expectancy and it brings your digital TV quality to the next level of visual entertainment.
http://www.worlddvb.com/product/htm/DVB-S2pcie2005.htm
DVBWorld`s Devices support Blindscan function
DVBWorld Software Blindscan show :
DVBWorld Newsoftware Version:
install DVBWorld New software and update the new driver, then open the DVBWorld.exe:
settings sat and LNB,then press " Scan Sat",
select "Blind scan a satellite":
when u press "Blind Scaning start",it will show "warning...",pls check the warning:
press" NO" ,now the software start to blind scaning...
when blindscan ok,it show other "warning"...,if u press "yes", now the new TPs and channels will be saved.
the blind scan function only support DVBWorld "pci2004D/PCI-E2006/USB2104D" DVB-S2 devices!!