Matrix Cam Air

[illusionm5]

Тръгнаха всички SD с изключение на HD канали.

[turbopower]

За булкрипт ли става въпрос или за друга кодировка?

[illusionm5]

Точно за него HD КО и само канали SD OK, въпроса е дали е оскама или Fr.

[georgdimitrov]

Точно за него HD КО и само канали SD OK, въпроса е дали е оскама или Fr.

Може ли да дадете някой линкове?
Редактирано: turbopower

[georgdimitrov]

i razbira se s BG kanali

[turbopower]

За клавиатурата само кирилица моля. Относно линковете, мисля че си в грешка темата е за модул за телевизор. Колега illusion моля прикачи firmware който използваш, сигурен ли си че линията ти дава достъп до тези канали?

Sent from my D6503 using Tapatalk

[illusionm5]

Картата ми е фул V2, гледам на 3 Vu+ duo, ultimo y zero от А до Я, всичко си работи без проблем. Със Fr. на немците съм , последния тук. Четя и доколкото разбирам трябва да се опише във mca_cam.upb тук.

[illusionm5]

Писъх на mihaip, да видим ще има ли желание да отговори и ще може ли нещо да се направи.

[turbopower]

Предният път той го нагласи но бушкрипта не работеше. Уф помня аз го бях настройвал също, но смених харда на компютъра и файловете ги няма. От няколко дни се мъча да намеря скриптове, мисля че имам няколко лични от mihaip Довечера ще проверя и ще пусна инструкции. Доколкото си спомням sids не се описваха за това съм в недоумение защо не ти работят. Прикачи оскам конфигурация си тук за всеки случай може пък да е нещо там.

Sent from my D6503 using Tapatalk

[illusionm5]

Значи човека отговори и каза, че няма обяснение.
Това е което имам като конфиг какво ли не съм пробвал. И това е скрипта след сменяне от sd на hd.

• 2016/06/30 21:26:47 00000000 s (main) system name = linux
• 2016/06/30 21:26:47 00000000 s (main) host name = mca
• 2016/06/30 21:26:47 00000000 s (main) release = 2.6.28.2_matrixair
• 2016/06/30 21:26:47 00000000 s (main) version = #2125 mon apr 16 15:55:32 cest 2012
• 2016/06/30 21:26:47 00000000 s (main) machine = armv5tejl
• 2016/06/30 21:26:47 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1040
• 2016/06/30 21:26:47 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2016/06/30 21:26:47 00000000 s (main) signal handling initialized
• 2016/06/30 21:26:48 00000000 s (config) 335 service-id's loaded in 205 ms
• 2016/06/30 21:26:48 00000000 s (net) monitor: Initialized (fd=11, port=89)
• 2016/06/30 21:26:48 00000000 s (main) binary without cardreader support! No emm processing possible!
• 2016/06/30 21:26:48 00000000 s (reader) oscam_server_casa [cs378x] creating thread for device 192.168.1.35
• 2016/06/30 21:26:48 36ac0076 p (reader) oscam_server_casa [cs378x] proxy 192.168.1.35:12088
• 2016/06/30 21:26:48 36ac0076 p (reader) oscam_server_casa [cs378x] proxy initialized, server 192.168.1.35:12088
• 2016/06/30 21:26:48 00000000 s (stat) loadbalancer: Could not open /tmp/.oscam/stat for reading (errno=2 no such file or directory)
• 2016/06/30 21:26:48 00000000 s (main) waiting for local card init
• 2016/06/30 21:26:49 40cfd917 h (webif) webif: Decompressed 136196 bytes back into 318576 bytes
• 2016/06/30 21:26:49 40cfd917 h (webif) http server running. Ip=0.0.0.0 port=81
• 2016/06/30 21:26:49 00000000 s (main) init for all local cards done
• 2016/06/30 21:26:49 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2016/06/30 21:26:49 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2016/06/30 21:26:49 00000000 s (anticasc) anti cascading disabled
• 2016/06/30 21:26:49 07306c94 c (client) plain dvbapi-client granted (dvbapi, au=on (1 reader))
• 2016/06/30 21:26:55 07306c94 c (dvbapi) demuxer 0 ecmpid 0 caid: 4aee ecm_pid: 0d4a provid: 000000
• 2016/06/30 21:26:55 07306c94 c (dvbapi) demuxer 0 found 1 ecmpids and 2 streampids in capmt
• 2016/06/30 21:26:55 07306c94 c (dvbapi) demuxer 0 trying to descramble pid 0 caid 4aee provid 000000 ecmpid 0d4a any chid pmtpid 0000 vpid 0050
• 2016/06/30 21:27:03 36ac0076 p (reader) 192.168.1.35: Resolved ip=192.168.1.35
• 2016/06/30 21:27:03 36ac0076 p (reader) oscam_server_casa [cs378x] connecting to 192.168.1.35:12088
• 2016/06/30 21:27:04 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:d4ec24925f4f2cb5d6ab31551dd2533b): Found (199 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:05 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:48087e1f0fdbc2ee30aeaba3b9de9429): Found (172 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:27 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:ccbcb6dde6e7d732e7a230f71dcab619): Found (128 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:27 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:4b1a8a4ea006df02b1a0cb57c6a8c9ae): Found (181 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:33 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:95de09509f3561aa48c7710355171e2c): Found (176 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:41 07306c94 c (ecm) dvbapi (4aee@000000/0000/03ef/4f:944a68a2eb72cc09bd17850cadd874ae): Found (176 ms) by oscam_server_casa - btv
• 2016/06/30 21:27:49 07306c94 c (dvbapi) demuxer 0 ecmpid 0 caid: 4aee ecm_pid: 0f11 provid: 000000
• 2016/06/30 21:27:49 07306c94 c (dvbapi) demuxer 0 found 1 ecmpids and 2 streampids in capmt
• 2016/06/30 21:27:49 07306c94 c (dvbapi) demuxer 0 trying to descramble pid 0 caid 4aee provid 000000 ecmpid 0f11 any chid pmtpid 0000 vpid 020f

[global]
logfile = stdout;/var/log/oscam.log
usrfileflag = 1
nice = -1
maxlogsize = 100
cwlogdir = /var/log/oscam_cw.log
emmlogdir = /var/log/oscam_emm.log


[dvbapi]
enabled = 1
au = 1
user = dvbapi


[monitor]
port = 89
nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,192.168.0.0-192.168.255.255
appendchaninfo = 1


[webif]
httpport = 90
httpuser = user
httppwd = pass
httphelplang = de
httprefresh = 30
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,192.168.0.0-192.168.255.255
appendchaninfo = 1

[reader]label = oscam_server_casa
protocol = cs378x
device = 192.168.1.35,12088
user = matrixcam1
password = matrixcamhome1
caid = 4aee
ecmwhitelist = 4aee:4f
group = 1
audisabled = 1

[account]
user = dvbapi
caid = 4aee
au = oscam_server
group = 1

#
# dvbapi configuration
#
# types:
# p - priority
# format:
# p: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# i - ignore
# format:
# i: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# m - map
# format:
# m: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# d - delay
# format:
# d: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
p: 4aee
#p: 1838
#p: 1722
#p: 1835
#i: 0


#p: 0500:023800 # prioritize 0500 with provider 023800
#p: :::1bcd # prioritize ecm stream with pid 1bcd on any channel
#p: 1722 # prioritize 1722
#p: 1830::ef75 # prioritize 1830 on channel ef75 only
#m: 1830 1830:003411 # map caid 1830 always to provider 003411
#d: 1702 200 # wait 200ms before writing cw on caid 1702
#i: :002000 # ignore provider 002000 on every channel
#i: 0 # ignore every caid that was not handled before