praticamente nulla !!!! non viene fuori niente. nemmeno un carattere!
max74@max74-HP:~$ sudo modprobe ftdi_sio
[sudo] password for matrix74:
max74@max74-HP:~$
praticamente nulla !!!! non viene fuori niente. nemmeno un carattere!
max74@max74-HP:~$ sudo modprobe ftdi_sio
[sudo] password for matrix74:
max74@max74-HP:~$
Senza cavo inserito:Originally Posted by sorpeppo
sudo modprobe usbserial vendor=0x192f product=0x0916
Posta il log.
Sempre senza cavo inserito:
sudo modprobe ftdi_sio
Riposta il log
Attacca il cavo:
dmesg | grep usb
Posta il log
Sempre col cavo inserito:
usb-devices
Posta il log
Come si puo' vedere, ai ptimi 2 comandi ...quelli col cavo staccato, non esce assolutamente niente, mentre col cavo attaccato si.
posto qui il log
P.S. grazie per le risposte.
matrix74@matrix74-HP:~$ sudo modprobe usbserial vendor=0x192f product=0x0916
[sudo] password for matrix74:
matrix74@matrix74-HP:~$ sudo modprobe ftdi_sio
matrix74@matrix74-HP:~$ dmesg | grep usb
[ 0.388866] usbcore: registered new interface driver usbfs
[ 0.388875] usbcore: registered new interface driver hub
[ 0.388899] usbcore: registered new device driver usb
[ 0.901256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.901258] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.901261] usb usb1: Product: EHCI Host Controller
[ 0.901263] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[ 0.901265] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.917232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.917235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917238] usb usb2: Product: EHCI Host Controller
[ 0.917240] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[ 0.917242] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.213123] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.345758] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.345766] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.457161] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.589775] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.589781] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.661118] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.756619] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52e
[ 1.756628] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.756634] usb 1-1.1: Product: USB Receiver
[ 1.756639] usb 1-1.1: Manufacturer: Logitech
[ 1.775617] usbcore: registered new interface driver usbhid
[ 1.775620] usbhid: USB HID core driver
[ 1.780279] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[ 1.780459] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.780745] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input6
[ 1.781082] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.861182] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.988152] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a127
[ 1.988160] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.988166] usb 2-1.5: Product: HP Webcam
[ 1.988171] usb 2-1.5: Manufacturer: SuYin
[ 1.988175] usb 2-1.5: SerialNumber: CN0316-S30C-OV10-VH-R02.01.00
[ 13.720395] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13
[ 13.720504] usbcore: registered new interface driver uvcvideo
[ 96.353126] usb 1-1.1: USB disconnect, device number 3
[ 122.255345] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 122.347947] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 122.347954] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 64
[ 122.347958] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64
[ 122.347961] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x4 has invalid maxpacket 64
[ 122.347965] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x85 has invalid maxpacket 64
[ 122.347968] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 64
[ 122.348949] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6011
[ 122.348955] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 122.348961] usb 1-1.2: Product: Triple Reader+
[ 122.348965] usb 1-1.2: Manufacturer: Argolis
[ 122.348970] usb 1-1.2: SerialNumber: 00000689
[ 122.372620] usbcore: registered new interface driver usbserial
[ 122.372633] usbcore: registered new interface driver usbserial_generic
[ 122.372643] usbserial: USB Serial support registered for generic
[ 122.382993] usbcore: registered new interface driver ftdi_sio
[ 122.383325] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 122.383794] usb 1-1.2: Detected FT2232C
[ 122.383798] usb 1-1.2: Number of endpoints 2
[ 122.383802] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 122.383805] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 122.383808] usb 1-1.2: Setting MaxPacketSize 64
[ 122.386908] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 122.387009] usb 1-1.2: Detected FT2232C
[ 122.387013] usb 1-1.2: Number of endpoints 2
[ 122.387016] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 122.387019] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 122.387022] usb 1-1.2: Setting MaxPacketSize 64
[ 122.387440] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 122.387533] usb 1-1.2: Detected FT2232C
[ 122.387536] usb 1-1.2: Number of endpoints 2
[ 122.387539] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 122.387542] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 122.387545] usb 1-1.2: Setting MaxPacketSize 64
[ 122.387945] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 212.048453] usb 1-1.2: USB disconnect, device number 4
[ 317.246038] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 317.338483] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 317.338490] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 64
[ 317.338495] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64
[ 317.338498] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x4 has invalid maxpacket 64
[ 317.338502] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x85 has invalid maxpacket 64
[ 317.338505] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 64
[ 317.339494] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6011
[ 317.339502] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 317.339508] usb 1-1.2: Product: Triple Reader+
[ 317.339513] usb 1-1.2: Manufacturer: Argolis
[ 317.339518] usb 1-1.2: SerialNumber: 00000689
[ 317.340172] usb 1-1.2: Detected FT2232C
[ 317.340177] usb 1-1.2: Number of endpoints 2
[ 317.340182] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 317.340186] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 317.340191] usb 1-1.2: Setting MaxPacketSize 64
[ 317.340551] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 317.340913] usb 1-1.2: Detected FT2232C
[ 317.340920] usb 1-1.2: Number of endpoints 2
[ 317.340927] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 317.340933] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 317.340939] usb 1-1.2: Setting MaxPacketSize 64
[ 317.341296] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 317.341645] usb 1-1.2: Detected FT2232C
[ 317.341650] usb 1-1.2: Number of endpoints 2
[ 317.341655] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 317.341660] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 317.341664] usb 1-1.2: Setting MaxPacketSize 64
[ 317.342026] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 339.402809] usb 1-1.2: USB disconnect, device number 5
[ 391.246804] usb 1-1.2: new high-speed USB device number 6 using ehci-pci
[ 391.339273] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 391.339280] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 64
[ 391.339284] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64
[ 391.339288] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x4 has invalid maxpacket 64
[ 391.339291] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x85 has invalid maxpacket 64
[ 391.339295] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 64
[ 391.340254] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6011
[ 391.340262] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 391.340268] usb 1-1.2: Product: Triple Reader+
[ 391.340273] usb 1-1.2: Manufacturer: Argolis
[ 391.340277] usb 1-1.2: SerialNumber: 00000689
[ 391.341131] usb 1-1.2: Detected FT2232C
[ 391.341138] usb 1-1.2: Number of endpoints 2
[ 391.341145] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 391.341152] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 391.341157] usb 1-1.2: Setting MaxPacketSize 64
[ 391.341630] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 391.342093] usb 1-1.2: Detected FT2232C
[ 391.342100] usb 1-1.2: Number of endpoints 2
[ 391.342107] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 391.342114] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 391.342121] usb 1-1.2: Setting MaxPacketSize 64
[ 391.342651] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 391.343102] usb 1-1.2: Detected FT2232C
[ 391.343110] usb 1-1.2: Number of endpoints 2
[ 391.343117] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 391.343124] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 391.343130] usb 1-1.2: Setting MaxPacketSize 64
[ 391.343668] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 420.306666] usb 1-1.2: USB disconnect, device number 6
[ 642.611706] usb 1-1.2: new high-speed USB device number 7 using ehci-pci
[ 642.704179] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 642.704186] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 64
[ 642.704190] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64
[ 642.704194] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x4 has invalid maxpacket 64
[ 642.704198] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x85 has invalid maxpacket 64
[ 642.704201] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 64
[ 642.705188] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6011
[ 642.705195] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 642.705200] usb 1-1.2: Product: Triple Reader+
[ 642.705205] usb 1-1.2: Manufacturer: Argolis
[ 642.705209] usb 1-1.2: SerialNumber: 00000689
[ 642.706003] usb 1-1.2: Detected FT2232C
[ 642.706008] usb 1-1.2: Number of endpoints 2
[ 642.706013] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 642.706018] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 642.706022] usb 1-1.2: Setting MaxPacketSize 64
[ 642.706511] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 642.706897] usb 1-1.2: Detected FT2232C
[ 642.706902] usb 1-1.2: Number of endpoints 2
[ 642.706907] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 642.706912] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 642.706916] usb 1-1.2: Setting MaxPacketSize 64
[ 642.707469] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 642.707878] usb 1-1.2: Detected FT2232C
[ 642.707885] usb 1-1.2: Number of endpoints 2
[ 642.707893] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 642.707900] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 642.707906] usb 1-1.2: Setting MaxPacketSize 64
[ 642.708272] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB2
matrix74@matrix74-HP:~$ usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.11
S: Manufacturer=Linux 3.11.0-13-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0020 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0403 ProdID=6011 Rev=05.00
S: Manufacturer=Argolis
S: Product=Triple Reader+
S: SerialNumber=00000689
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=150mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.11
S: Manufacturer=Linux 3.11.0-13-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0020 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=064e ProdID=a127 Rev=02.10
S: Manufacturer=SuYin
S: Product=HP Webcam
S: SerialNumber=CN0316-S30C-OV10-VH-R02.01.00
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
Risolto !
seguendo passo passo la guida che era stata per tutto il tempo sotto i miei occhi !
http://www.ftdichip.com/Drivers/D2XX/Li ... -linux.txt
resta il problema degli ecm alti...intorno ai 250ms
suggerimenti?
Ciao a tutti,
scusa, potresti per favore inserire il link completo?Ho il tuo stesso problema e non ne esco.
Grazie
http://www.ftdichip.com/Drivers/D2XX.htm
Salve a tutti
Vorrei aggiornare la oscam su ubuntu 10.04 server (attualmente ho la versione 1.00 5374 ) come faccio a cambiarla ? Qualcuno sa aiutarmi?
Provate a farlo funzionare in modalitą nativa settando in oscam.server questi 2 parametri
protocol = smartreader
device = TripleP3;Serial:00000689
Il seriale ho messo quello che usciva dall'esempio sopra a cui non funzionava, poi settate anche
autospeed = 1
Posting Permissions
Reply With Quote