Mvision firm chat

[magdyalsabe]

mvision fs-8200

[fasih]

i have fcis7000, when i upgrade receiver error6 appears, plz help

[lulyak]

Hello

where can I get new software for FS-7000 and F 7100

Thxx

[mouloud123]

hello all

i need help to upgrade my fcis 7000 with the firm mib 6.33.upb i make upgrade bootloader and upgrade softaware and it does not work. I resart my receiverwith the jtag.

Thanks for help

[casanon]

where can'i found a tv command for fcis 7000e+, i have upgrade my
old fcis7000 with the new 6.31 software but now , the command don't go !!! this process is a very bad operation ! be carrefull !

Hello,

Try the remote control of Goldvision Titanium. I read in a different forum that it works 100% with the upgraded FCIS 7000 into MVision 7000 e+

If you can try one before buying it, please inform us once you manage to use it successfully.

Regards

[milou26]

Hi,

Please, i've got a IRIS FTA 7000= MVISION F1000, i changed it on a MVISION 7000e+ with the last firmwares known. My problem is that i can't have channels. The signal on HOTBIRD and ASTRA is excellent (80 %) but when i look for channels, it finds nothing...
So i tried to enter channels with a file data, and the same thing, more over this time, i have the channels in my list but "NO SIGNAL VIDEO" with an excellent signal on the satellites...
What can i do, please ?

Thank you for your answers.

[khawajaanwar]

I sucessfully upload file named m2.44_FCIS7000E+_up using BootLoader (update the boot loader) in my MVision receiver. But i could not manage to upload the firmware file m2.94_FCIS-7000E+_up and firmware 7000_MIB_633. After that when i try to update the firmware file m2.94_FCIS-7000E+_up through MVisonUtilsS202 at the end it shows message Error 6. Please guide how to solve this problem.

Waiting for reply.

[Lalipuk]

Hello everyone!
please tell me how to solve the following problem:
MVISION 9080 NET and a card Via 2.6 The receiver reads the card identification data but still, I can't see a thing. I heard that it could be a blocker for the smartcard, but I found nothing. Is anything that must be activated? What do I have to do to see the program with this card?
Thank you very much and hope to find a clear answer.

[manuska]

Bonj. Totox69 in a 1 ° sorry for my mistake --- French TOTOX69 could you please I say this with the mvision 7000e + with the new firm can see 6.36 on 2 jsc sport only recently we can see with a lot of demos if so how to configure thanks for everything and yet Question excuse me @ + manuska

[odoo76]

Hello,
I'm new in the community and i need your help. I have an old Mvision Fcis 7000 Hispania. I had a very old firmware i think 2.78 and i saw that i could put the new upd files if i update my bootloader.
So i did it..i took the file bootloader_upgrade.rar without knowing if it suits to my mvision. I made the update the result was "good" operating firmware 2.55.
The wierd is that i cannot control anymore the receiver from the remote control but only from the bottoms of the receiver.

i try to find remote fcis7000 e+ but the problem after long search for this remote in the stors i didn't found it (the funny they want to see the old one first to give me the sam and when i say it dosent work they sed ok get it to give u the sam) hhhhhhh.

is there any anther help advies plzzzzzzzzzzzz?

thanks