Diskutim rreth usb tuner tokesor

[kliti]

[QUOTE=topix2;1255147]

dheme zgema h5 series me kernel 4.10.6 dhe nuk istalohet kjo usb. Usb Geniatech t230 dvb-t2/c ndoshta duhet 4k aparati.flm

Kjo mund t'ju ndihmoje te gjeni driver e duhur. Ndoshta do provuar me imazh Black Hole qe i ka gia driver te instaluar.

This bundle contains a modified CP210x driver for the 3.13.0 kernel (Ubuntu 14.04).

It contains:

- Fix for CP2104, now sets the baudrate via "SET_BAUDRATE/GET_BAUDRATE" command
- Fix for CP2105, now stores the interface number for the device for multi interface support
- Fix to support GPIO on all parts
- Fix to correct control request for MHS, Line Control and Break support

NOTE: This driver is an example of how to perform GPIO operations within the CP210x driver since
the driver on kernel.org does not support GPIO at this time. This driver has only been written
and tested on the Linux 3.13.0 kernel on Ubuntu 14.04. This driver is a modified version of the
existing driver in the Linux 3.13.0 kernel, which is maintained at kernel.org. It is recommened
to use the driver there that matches your specific kernel version:

www.kernel.org

Build instrutions:

Ubuntu:
1. make ( your cp210x driver )
2. cp cp210x.ko to /lib/modules/<kernel-version>/kernel/drivers/usb/serial
3. insmod /lib/modules/<kernel-version/kernel/drivers/usb/serial/usbserial.ko
4. insmod cp210x.ko

RedHat:
1. yum update kernel* //need to update the kernel first otherwise your header won't match
2. yum install kernel-devel kernel-headers //get the devel and header packages.
3. reboot //your build link should be fixed after your system come back
4. make ( your cp210x driver ) // should be able to build successfully at this point
5. cp cp210x.ko to /lib/modules/<kernel-version>/kernel/drivers/usb/serial
6a. insmod /lib/modules/<kernel-version/kernel/drivers/usb/serial/usbserial.ko
6. insmod cp210x.ko
7. sudo chmod 666 /dev/ttyUSB0
8. sudo chmod 666 /dev/ttyUSB1


GPIO example:
This shows how to use the two IOCTLs to toggle GPIOs. This sample application simply reads
the GPIO settings from the device, flips it, then writes the new setting.

Build instructions:
1. g++ cp210x_gpio_example.c -o cp210x_gpio_example
2. ./cp210x_gpio_example

[miniel]

vu zero me openpli 6.0 i ka driverat per geniatech t230 dhe kernel 3.13.5, shpresojme te funksionoje

[topix2]

vu zero me openpli 6.0 i ka driverat per geniatech t230 dhe kernel 3.13.5, shpresojme te funksionoje

Me vu solo se e provova me imag openpli 6 nuk u fut ne pune.me driver t230.

[MATJANI]

Me vu solo se e provova me imag openpli 6 nuk u fut ne pune.me driver t230.

vu zero me openpli 6.0 i ka driverat per geniatech t230 dhe kernel 3.13.5, shpresojme te funksionoje

Mos u lodhni kot se nuk ben nqs kerneli eshte version me i vogel se 3.19

[kapoaug]

Kapoaug presim testimin ne vu+ zero.

Nuk punon ne vu zero me imazh openpli 6.0. Driverat jane. I shkarkohen por nuk del si usb tuner me mbas.. Mesa duket Kliti Ka te drejte. Punon vetem ne dekoderat me kernel 4.x.x e siper.. te pakten deri tani.. ndoshta me vone rregullohet edhe ky problem..

[president1]

pershendetje aka dikush informata a punojn programet kosovare ne toksor me DVB T2 tuner kam resiver vu+solo2 original vitin e kaluar kan punuar por tash as tunerin spoma njeh kam usb tuner dvb t2 perdor imagjin open atv 6.1

[skrap]

Per dmbox 800 sim 2.01 usbdvbt sky punon per mrekulli me blackhole i fundit backup artur blackhole 3.0.1 f nese e mbaj ment mire dicka e till se nuk me kujtohet mire tani se nuk jame ne shpi tani qe ta shof. Dhe une ate perdor.