pershendetje miq
me ka ren ne dor nje clound ibox3 clone i hedh imazh kur e ndez me rrin boot dhe vetem figura e imazhit
Sat-elite031
Kjo tregon se nuk merr imazhin.Tė kam dėrguar PM.Falemnderit!
cuna ka ndonjeri info per ket box i hudh image ne fillim del flazh /u-c r/u-r f/ pastaj done
vetem kaq spo mar vesh mos duhet ndryshu folder
qe eshte cloudix
cuna e lidha me putty me pa ca nxjer boxi qe nuk flashohet
7358000100000001#!@#@
BCM97358A1 CFE v4.144, CFE core v4.29, Endian Mode: Little
Build Date: Mon Jul 7 08:24:59 CEST 2014 (paul@ini)
Copyright (C) Broadcom Corporation.
Enabling NAND flash at CS2.
BCHP_NAND_FLASH_DEVICE_ID =0x0, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x0
CPU speed: 751MHz
Total memory(0): 512MB
DDR Freq: 800 MHz
DDR Mode: DDR3
MEMC 0 DEV SIZE: 2GBIT
MEMC 0 DDR Width:16
MEMC 0 DEV Width:8
Boot Device: SPI
Total flash: 4MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
CFE initialized.
USB device matching <USB Disk> not found!
[FLASH-TOOL] Searching update files...
[FLASH-TOOL] Could not init file system: Device not found
[FLASH-TOOL] There are not any update files...
Booting...
Starting splash screen.
Found splash image - Width = 720 Height = 576
Non Interlaced Replace list 043e8680 0c800000Interlaced Replace list 043e8c20 0c8005a0
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=256M@512M
Loading: Failure during reading from nand partition, can not find good blocks in partition
Failure during reading from nand partition, can not find good blocks in partition
Failed.
Could not load : I/O error
Trying again with '-nz' option
Loading: Failure during reading from nand partition, can not find good blocks in partition
Failed.
Could not load : I/O error
CFE>
me sa po shof ky don jtag a din kush si me ja be
BCM97358A1 CFE v4.144, CFE core v4.29, Endian Mode: Little
Build Date: Mon Jul 7 08:24:59 CEST 2014 (paul@ini)
Copyright (C) Broadcom Corporation.
Enabling NAND flash at CS2.
BCHP_NAND_FLASH_DEVICE_ID =0x0, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x0
CPU speed: 751MHz
Total memory(0): 512MB
DDR Freq: 800 MHz
DDR Mode: DDR3
MEMC 0 DEV SIZE: 2GBIT
MEMC 0 DDR Width:16
MEMC 0 DEV Width:8
Boot Device: SPI
Total flash: 4MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
CFE initialized.
USB: New device connected to bus 0 hub 1 port 1
USB: Resetting device on bus 0 hub 1 port 1
USB: Locating Class 08 Vendor 13FE Product 4123: Mass-Storage Device
USBMASS: Unit 0 connected
*** USB DISK Pro (16023 MB, lbs=512) ***
*** start.bat: File not found
[FLASH-TOOL] Searching update files...
[FLASH-TOOL] FORCE FLASHING
Reading usbdisk0:cloudix/kernel.bin:
Erase address 0x7e80000 failed, bad block?
Erase address 0x7e84000 failed, bad block?
Erase address 0x7e88000 failed, bad block?
Erase address 0x7e8c000 failed, bad block?
Erase address 0x7e90000 failed, bad block?
Erase address 0x7e94000 failed, bad block?
Erase address 0x7e98000 failed, bad block?
Erase address 0x7e9c000 failed, bad block?
Erase address 0x7ea0000 failed, bad block?
Erase address 0x7ea4000 failed, bad block?
Erase address 0x7ea8000 failed, bad block?
Erase address 0x7eac000 failed, bad block?
Erase address 0x7eb0000 failed, bad block?
Erase address 0x7eb4000 failed, bad block?
Erase address 0x7eb8000 failed, bad block?
Erase address 0x7ebc000 failed, bad block?
Erase address 0x7ec0000 failed, bad block?
Erase address 0x7ec4000 failed, bad block?
Erase address 0x7ec8000 failed, bad block?
Erase address 0x7ecc000 failed, bad block?
Erase address 0x7ed0000 failed, bad block?
Erase address 0x7ed4000 failed, bad block?
Erase address 0x7ed8000 failed, bad block?
Erase address 0x7edc000 failed, bad block?
Erase address 0x7ee0000 failed, bad block?
Erase address 0x7ee4000 failed, bad block?
Erase address 0x7ee8000 failed, bad block?
Erase address 0x7eec000 failed, bad block?
Erase address 0x7ef0000 failed, bad block?
Erase address 0x7ef4000 failed, bad block?
Erase address 0x7ef8000 failed, bad block?
Erase address 0x7efc000 failed, bad block?
Programming...
Failure during writing to nand partition, can not find good blocks in partition
Failed.: Error
[FLASH-TOOL] Flashing complete! Please reboot Your reciver
CFE>