How To Install image on dreambox 800 clone.

[<<ELVIS>>]

hello freinds:

can someone tell me how to install. one or more image to dreambox 800 clone with gemini 5.1? is this possible with D.C.C. ?

thanks.

[douros]

Hi Elvis
Its easier to flash it with browser
Have a look in the link below
Becarefull the image you want to flash to be patched for clones and not original
http://www.dream-multimedia-tv.de/en...rmware-browser

[<<ELVIS>>]

hello friend douros, yes i know how to do that...but that is not the question.
the question is how can i added more images, like my dreambox 7000s...i have four image on that DB. (on usb stick)
and have the choice which image i will boot.
on my DB 800hd i have this image...newnigma2-dm800, you find it here...http://www.satsupreme.com/showthread...0-Clone/page18
is it possible to add. more image? and how to do that.

thanks

[douros]

If you want multiboot then you must use a fast image in the flash just to boot the box and then use any images want from your usb drive
I recomment you to try Black Hole Hyperspace dm800 0.3 MultiBoot.......get it patched for your simcard
http://www.satsupreme.com/showthread...-0.3-MultiBoot
Also read how to work with meoboot(meoboot including in this image), from the part how to mount the usb drive and install images on it
http://www.satsupreme.com/showthread...hlight=meoboot
I send you pm
If you can't find this image for your simcard......try to install manually meoboot 0.94 at newnigma2 with the directions I have sent you

[teletext]

Hello i have the same problem thanks for the website in know now how i most to do it

[webz88]

Switch off your DM800
switch it on again and take note of boot loader on the Dream screen (1 second)

-Switch off your DM800
-Plug in power while pushing front silver button.PWait until you see ***stop*** on the dream screen
-Take note of the IP address shown on the little screen.
-Do not switch dream off
-Connect PC (or notebook) to Dreambox
-Start any browser (Firefox) and enter the IP address that you have copied in the browser.
-A special screen appears for flashing the dream image on your box.
-Go to the bottom of the browser page
-Select the software location on your computer. It should be nfi format. (make sure that it is the same version as your boot loader)
-Click on flash and wait few minutes for loading to finish.
-You do not need to load a boot-loader if your software is up-to date.

I do not recommend the use of Gemini on your clone (unless it is patched for clones)

Dream Elite comes ready with a multiboot plug-in (Meoboot) - this can go in the Dream internal flash.
You can then install Gemini on the USB with up to 8 other images

You need to use a USB for multibooting.
Format it through Dreambox and load the new images using DCC in directory media/usb/meoboot upld