Originally Posted by
cokeck
je rencontre pas mal de difficulté pour faire fonctionné mon gbox avec dreambox 500s
ma configuration
gemini 4.60 nObomb, gbox 2.21b tout est installe et je voudrai faire du share et garder mes peers
-le PC est connecter a internet par wifi
-le Dream est connecter au pc par cable rj45 croise et cable rs232
sachant que dcc fonctionne tres bien.. Reseau ok
j'ai bien gbox dans var/bin, var/script,et var/keys/ et tout est en attribut 755 et que gbox suite et gbox center dans la dream
et voici mon gbox_cfg
#Z: { 00 10 } 192.168.0.5 8025
F: { 03 }
C: { 02 }
M: { 12 }
A: { 00 }
U: { 01 }
H: { 01 }
T: { 00 }
O: { 00 } 192.168.0.5
L: { 01 } 192.168.0.5
W: { 00 00 } 115200
V: { F0 30 }
zanzibare.. que doit -je faire encore?
merci d avance de votre coups de main
salut
ta dream dois être relié a ton routeur direct!
je t'ai dit avant que le rs232 servai a rien pour faire du share,les attribut dans var/keys son en 644.ton port de gbox et bien ouvert sur l'ip de ta dream?
dans le gbox cfg mais commme sa:
a la ligne L mais l ip de ta dream
PHP Code:
# gbox config file
# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS fr RST detection
# ** 1* Use DCD fr RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 don\\\'t show any ECM\\\'s
# 01 show only valid ECM\\\'s
# 02 show valid and bad ECM\\\'s with complete data display
C: { 02 }
# Display EMM messages on Konsole
# *0 don\\\'t show any EMM\\\'s
# *1 show only valid EMM\\\'s
# *2 show valid and bad EMM\\\'s with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 00 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# mypass (use user=root and pass=mypass for nhttpd)
O: { 00 } 192.168.1.4
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 01 } 192.168.1.4
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don\\\'t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.1.3 8024
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW\\\'s, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW\\\'s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { F0 37 }
et regarde ici http://www.satsupreme.com/showthread.php?t=62825 tu as tous les tuto pour faire marché gbox
@+
Reply With Quote
