Loadbalancing and Oscam Config support needed!

[SupremeOne]

Hello

Could someone take a look at my config:

[global]
logfile = /var/log/oscam.log
fallbacktimeout = 1600
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 0
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100
lb_reopen_seconds = 900
lb_force_reopen_always = 1
lb_retrylimit = 800
lb_savepath = /usr/local/etc/stats


[cache]


[cccam]
port = 13000
nodeid = EC0C763910151400
version = 2.3.0
reshare_mode = 1
ignorereshare = 1

[reader]
label = redlight
description = Redlight HDTV Elite Fusion / Serial: Reader 250
protocol = smartreader
device = 002:004
smargopatch = 1
autospeed = 0
cacheex_allow_filter = 0
caid = 0500
boxid = D5235B16
boxkey =
detect = cd
mhz = 534
cardmhz = 600
ident = 0500:043800,1F1F1F,1F1F1F
group = 1
lb_weight = 300


[reader]
label = Server_101
description = CanalDigitaal
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,!fox_sports_2
lb_whitelist_services = canal_digitaal_nl
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0
audisabled = 1
auprovid = 00006A


[reader]
label = Server_102
description = TVVlaanderen, SKY=D, SKY-E, Skylink
protocol = cccam
device =
user =
password =
services = mtv_unlimited,sky_link,sky_deutchland,sk y_digital_(uk),tv_vlaanderen
inactivitytimeout = 30
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0
audisabled = 1


[reader]
label = Server_101x
description =
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,!fox_sports_2
lb_whitelist_services = canal_digitaal_nl
inactivitytimeout = 30
group = 4
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0
audisabled = 1
auprovid = 00006A


[reader]
label = Server_102x
description =
protocol = cccam
device =
user =
password =
services = mtv_unlimited,sky_link,sky_deutchland,sk y_digital_(uk),tv_vlaanderen
lb_whitelist_services = mtv_unlimited,sky_link,sky_deutchland,sk y_digital_(uk),tv_vlaanderen
inactivitytimeout = 30
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0
audisabled = 1


[reader]
label =
description =
protocol = cccam
device =
user =
password =
services = hd+,canal_digitaal_nl
inactivitytimeout = 30
group = 6
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0


[
[reader]
label = balci1
description =
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,tv_vlaanderen,digiturk
lb_whitelist_services = canal_digitaal_nl,tv_vlaanderen,digiturk
inactivitytimeout = 30
group = 7
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 3
cccmindown = 1
ccckeepalive = 1
cccreshare = 3
cccreconnect = 0
auprovid = 0000C0


[reader]
label = viasat
description = Viasat 5F6ACB21 - 0 1600834337 4 / Reader 6DCC92F
protocol = smartreader
device = 002:005
smargopatch = 1
caid = 093E
boxid = 0CB666EC
boxkey =
detect = cd
mhz = 534
cardmhz = 369
ident = 093E:000000
group = 8
emmcache = 1,1,0
lb_weight = 300


[reader]
label = PPaap1
description = PPaap1
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy _polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,cs_link,m tv_unlimited,sky_link,sky_italia,canal+_ esp,telesat,canalsat,sky_digital_(uk),hd +,canal_digitaal_nl,tv_vlaanderen,tntsat ,austriasat,srg_ssr,orf_digital,digiturk
inactivitytimeout = 30
group = 9
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0


[reader]
label = Meesterjan
description = Meesterjan
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy _polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,sky_link, sky_italia,canal+_esp,telesat,canalsat,s ky_digital_(uk),hd+,tntsat,austriasat,sr g_ssr,orf_digital,fox_sports_2
inactivitytimeout = 30
group = 10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0


[reader]
label = Meesterjan2
description = Meesterjan2
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy _polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,sky_itali a,canal+_esp,telesat,canalsat,sky_digita l_(uk),fox_sports_2
inactivitytimeout = 30
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0


[reader]
label = PPaap2
description = PPaap2
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy _polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,sky_link, sky_italia,canal+_esp,telesat,canalsat,s ky_digital_(uk),hd+,canal_digitaal_nl,tv _vlaanderen,bis,tntsat,austriasat,srg_ss r,orf_digital,elite_hd_10+,digiturk,fox_ sports_2
inactivitytimeout = 30
group = 11
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0





I want a specific channel to stay on same reader if connection is good. I don't want that Oscam searches for a new reader while the connection is good.

Any support is appreciated.

[SupremeOne]

anyone to help me? I've massive freezing.

[SupremeOne]

So many users active and no one wants to help me. I thought forums were made to discuss and try to help other people.

[Andrushenka]

So many users active and no one wants to help me. I thought forums were made to discuss and try to help other people.

Yes but forums are not a hotline for emergency. So please wait until someone who may help you has read the post!

[SupremeOne]

Yes but forums are not a hotline for emergency. So please wait until someone who may help you has read the post!

Ok sorry about this because I'm searching now for weeks for a solution and couldn't find an answer to my question, maybe you can help me ? I'm getting more and more a headache of this.

[gimic]

First of all if you have massive freezing, you don't have good peers, remove the freezing peers and problem solved.
if that is no option,

you could try with the CWC cyclecheck
http://screenpresso.com/=VGGHb

or increse the weight of the readers that are good.

[SupremeOne]

First of all if you have massive freezing, you don't have good peers, remove the freezing peers and problem solved.
if that is no option,

you could try with the CWC cyclecheck
http://screenpresso.com/=VGGHb

or increse the weight of the readers that are good.

I have massive freezing with Digiturk 0D00 caid. For the rest it's ok. Is it good to have loadbalancer enabled with oscam.services.

Currently I've set lb mode to 10(only logging)

What does cw cycle exactly could you describe it in a few words. I've updated oscam to the latest version. Also I want to stay on the same reader if the connection is good but Oscam searches for new reader and then I've some glitching with some readers with low ecm. Normally low ecm should be ok.

[SupremeOne]

Is it good to use oscam.services combined with caid and ident? I've a problem using oscam.services. When I enable oscam.services for digiturk I can't open some of the channels.

[gimic]

When the loadbalancer is off then the requests are send to all the readers that you have, that is bad for your peers because of heavy traffic. You should enable loadbalancing and create a service list for each user so you can exclude certain channels from beeing decoded. It takes a lot of work, but if you have only problems with digiturk than you can exclude digiturk from all of the readers that have problems and whitelist it on the readers that you don't have problems with. For cwc cycle i don't know exactly how it works, i guess it has to do with checksum beeing calculated and if not correct it drops the ecm. But don't know if Digiturk works with this.

[SupremeOne]

When the loadbalancer is off then the requests are send to all the readers that you have, that is bad for your peers because of heavy traffic. You should enable loadbalancing and create a service list for each user so you can exclude certain channels from beeing decoded. It takes a lot of work, but if you have only problems with digiturk than you can exclude digiturk from all of the readers that have problems and whitelist it on the readers that you don't have problems with. For cwc cycle i don't know exactly how it works, i guess it has to do with checksum beeing calculated and if not correct it drops the ecm. But don't know if Digiturk works with this.

Thank you very much. So if you look at my situation is it better to use lb mode=1?

This is currently how my oscam.conf looks like:

logfile = /var/log/oscam.log
fallbacktimeout = 1600
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 0
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100
lb_reopen_invalid = 0
lb_retrylimit = 1200
lb_savepath = /usr/local/etc/stats

My readers: I've Redlight Local Card with 4224,4225,364C,000A,35C0,35C1,35C2,35C3, 35C4,35C6,35C7,35C8,0833 as sids but not getting 100% OK the reader is getting NOK from other 0500 caid.

Reader of Balci is Digiturk, Canal Digitaal and TV Vlaanderen but I've massive freezing with Digiturk and getting only 75% OK

[reader]
label = redlight
description = Redlight HDTV Elite Fusion / Serial: Reader 250
protocol = smartreader
device = 002:004
smargopatch = 1
autospeed = 0
caid = 0500
boxid =
boxkey =
detect = cd
mhz = 534
cardmhz = 600
ident = 0500:043800,042800,042700
group = 1
lb_weight = 300


[reader]
label = Server_101
description = CanalDigitaal
protocol = cccam
device =
user =
password =
services = canal_digitaal,!fox_sport_2
lb_whitelist_services = canal_digitaal
inactivitytimeout = 30
group = 2
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000
audisabled = 1
auprovid = 00006A


[reader]
label = Server_102
description = TVVlaanderen, SKY=D, SKY-E, Skylink
protocol = cccam
device =
user =
password =
services = tv_vlaanderen,sky_uk,sky_link,sky_deutsc hland,mtv_
inactivitytimeout = 30
group = 3
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000
audisabled = 1


[reader]
label = Server_101x
description =
protocol = cccam
device =
user =
password =
services = canal_digitaal,!fox_sport_2
lb_whitelist_services = canal_digitaal
inactivitytimeout = 30
group = 4
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000
audisabled = 1
auprovid = 00006A


[reader]
label = Server_102x
description =
protocol = cccam
device =
user =
password =
services = tv_vlaanderen,sky_uk,sky_link,sky_deutsc hland,mtv_
inactivitytimeout = 30
group = 5
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000
audisabled = 1


[reader]
label = Raymond01
description =
protocol = cccam
device =
user =
password =
services = !digiturk,canal_digitaal,!tv_vlaanderen, !sky_uk,!sky_link,!sky_deutschland,!sky_ deutschland_,!canal+_spain,hd+,!nc+_pola nd,!nc+_conax_poland,!nc+_mix_poland,!po lsat,!tnk_poland,!tnk_smart_hd_poland,!t nk_hd_poland,!orange_poland,!mtv_,!sky_i talia,!telesat,!canal_sat_france,!redlig ht_,!redlight,!fox_sport_2
lb_whitelist_services = canal_digitaal,hd+
inactivitytimeout = 30
group = 6
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000






[reader]
label = balci1
description =
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
caid = 0100,0D00
ident = 0100:00006A,00006C;0D00:0000C0
group = 7
emmcache = 1,1,0
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 5
cccmindown = 1
ccckeepalive = 1
cccreshare = 3
cccreconnect = 10000


[reader]
label = viasat
description = Viasat 5F6ACB21 - 0 1600834337 4 / Reader 6DCC92F
protocol = smartreader
device = 002:005
smargopatch = 1
caid = 093E
boxid =
boxkey =
detect = cd
mhz = 534
cardmhz = 369
ident = 093E:000000
group = 8
emmcache = 1,1,0
lb_weight = 300
dropbadcws = 1


[reader]
label = PPaap1
description = PPaap1
protocol = cccam
device =
user =
password =
services = !digiturk,canal_digitaal,tv_vlaanderen,s ky_uk,sky_link,sky_deutschland_,canal+_s pain,hd+,nc+_poland,nc+_conax_poland,nc+ _mix_poland,polsat,tnk_poland,tnk_smart_ hd_poland,tnk_hd_poland,orange_poland,mt v_,sky_italia,telesat,canal_sat_france,! redlight_,!redlight,fox_sport_2
lb_whitelist_services = fox_sport_2
inactivitytimeout = 30
group = 9
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000






[reader]
label = PPaap2
description = PPaap2
protocol = cccam
device =
user =
password =
services = !digiturk,canal_digitaal,tv_vlaanderen,s ky_uk,sky_link,sky_deutschland_,canal+_s pain,hd+,nc+_poland,nc+_conax_poland,nc+ _mix_poland,polsat,tnk_poland,tnk_smart_ hd_poland,tnk_hd_poland,orange_poland,sk y_italia,telesat,canal_sat_france,!redli ght_,!redlight,fox_sport_2
lb_whitelist_services = fox_sport_2
inactivitytimeout = 30
group = 11
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 10000

As you see I'm currently not using services for Balci and Redlight because the high amount of NOK's.

When I use for Balci (Digiturk) oscam.services some of the Digiturk channels will not work but using Caid and Ident they will work.