Irdeto Card Sharing Software **

[athina]

Hello Max Max

Can you please email me or send a PM to me of a detail instructions of how to set up a Humax CW_Server Card Sharing Server and cliend.

Thankyou

[Salaam]

Hi, I have two Dreamboxes 7020s and whish to set them up to share a card between two rooms at home. Both boxes are connected via LAN. I am using Hydra Phoenix 1.09 and have installed SCAM and NEWCAMD. But how do I set them up to card share??? Please PM me or post some instructions.
Thanks and best regards.

[z80]

I have developed a hardware solution for SIDS and Garys sw etc that doesnt need a pc as a client.
Should work with HSIC as well.
NO need for a PC to connect the Humax.

find it here:-

http://www.austech.info/showthread.p...293#post916293

It works over the internet or local lan, no difference.
It works very quickly, only needs a 9600 baud connection !!!
It is working perfectly, even wireless.
It makes the server think that the decoder is directly connected to a com port.

It works by running virtual com port software on the server, and a bit of hardware does RS232 to TCPIP conversion.

Best is that the person with humax never knows the IP of the server.

[tiger501a]

I have developed a hardware solution for SIDS and Garys sw etc that doesnt need a pc as a client.
Should work with HSIC as well.
NO need for a PC to connect the Humax.

find it here:-

http://www.austech.info/showthread.p...293#post916293

It works over the internet or local lan, no difference.
It works very quickly, only needs a 9600 baud connection !!!
It is working perfectly, even wireless.
It makes the server think that the decoder is directly connected to a com port.

It works by running virtual com port software on the server, and a bit of hardware does RS232 to TCPIP conversion.

Best is that the person with humax never knows the IP of the server.

Hi how to do the RS232 to TCPIP????

i try to run the server but i only get this on the server log

CTS
DSR
RLSD Low

please help me i am thinking i have to do somthing with my serial, i have 3 meter serial cable i connect to my pc and one end to my Dynamite programer and in phoenix mode,

please tell me what to do. thanks....

[offsg]

Thanks, i will try and let u know...

[aslu]

Hi all,

I have Humax HDCI-2000 decoder. Is any way can i use virtual cam software or connect the serial port to my computer to watch the paid channels?

Regards,

Aslam

[kahkon]

Special for you.....

thank you