Keys by remote control

[menamm]

This Is How To Enter Keys With Remote Controler

1. Go in to any channel wich you want to see (it will be clear if procedure has been doing correctly)
2. EMU Menu (press button 0 + Menu)
3. Key Editor Menu
4. Choice code system (i.e. Nagra for D+)
5. With little arrows choise IDENT (i.e. 4101 for D+)
6. Press OK button
7. In window Key write : IDENT and INDEX and first 16 Keys
8. In window Key write : IDENT and INDEX and second 16 Keys
9. Press Exit button

In example to change Keys 00 for D+ (Nagra)
410100CE5823E424584566 - 410101F6152652E52BE556

In example to change Keys 01 for D+ (Nagra)
410102CE5823E424584566 - 410103F6152652E52BE556

These keys are not valid, they are just an example.

Remote Keys buttons

0 = 0 Button
1 = 1 Button
2 = 2 Button
3 = 3 Button
4 = 4 Button
5 = 5 Button
6 = 6 Button
7 = 7 Button
8 = 8 Button
9 = 9 Button
A = PG+ Button
B = PG- Button
C = GREEN Button
D = YELLOW Button
E = BLUE Button
F = RED Button
Del = LAST Button


from_menamm