Dreambox Tools

[sami.sami]

Notepad++ 5.5

Notepad++ is a free (as in "free speech" and also as in "free beer") source code editor and Notepad replacement that supports several languages. Running in the MS Windows environment, its use is governed by GPL License.

Based on a powerful editing component Scintilla, Notepad++ is written in C++ and uses pure Win32 API and STL which ensures a higher execution speed and smaller program size. By optimizing as many routines as possible without losing user friendliness, Notepad++ is trying to reduce the world carbon dioxide emissions. When using less CPU power, the PC can throttle down and reduce power consumption, resulting in a greener environment.

This project is mature. However, there may be still some bugs and missing features that are being worked on. If you have any questions or suggestions about this project, please post them in the forums. Also, if you wish to make a feature request, you can post it there as well. But there's no guarantee that I'll implement your request.

You're encouraged to translate Notepad++ into your native tongue if there's not already a translation present in the Download Section. And if you want, help translating Notepad++ official site into your native tongue would be greatly appreciated.

I hope you enjoy Notepad++ as much as I enjoy coding it.


Here are the features of Notepad++ : Syntax Highlighting and Syntax Folding 
	
	WYSIWYG 	
	User Defined Syntax Highlighting 	
	Auto-completion 	
	Multi-Document 	
	Multi-View 	
	Regular Expression Search/Replace supported 	
	Full Drag ‘N' Drop supported 	
	Dynamic position of Views 	
	File Status Auto-detection 	
	Zoom in and zoom out 	
	Multi-Language environment supported 	
	Bookmark 	
	Brace and Indent guideline Highlighting 	
	Macro recording and playback

[marcel1]

Lite DHCP Server 2.9 (Virtual DHCP Server For Windows)

Revolution in Firmware Upgrade by Persian Prince

[Lujdzo]

Enigma Signal Meter [E1+E2]

Here's another handy tool for DM users.
So the point was to use the signal meter from webif and don't carry
all equipment to antenna (this applies to those who do not have the
satfinder like me) - just pick up your notebook and connect via wireless
to the DM and you have everything in front of you.

I have tried with webif but refresh of signal on e2 is desperate (5-10 sec)
so that any adjustment is impossible.
So my friend make a small application that works well on the E1 and E2
boxes- Thank him on this.
This signal meter has visual and audible signal that tells you a percentage
of the SNR (in engl.)
To install the required framework 3.5 (i test it on DM800 and XP).
On E2 version use webif to change chanell - Dreambox has to be
switched on (on E1 you can choose frequencies and satellite directly
on aplication).

Thx: to zupy

[sami.sami]

Parental control patch for enigma2


Parental control, worthy of the name
I have a few feature requests for the parental control, because the current implementation is IMHO so that you can not really turn ...

First of all: What I do not like the current parental control?

1. If the sender restriction on, and indeed only makes sense if I lock a lot of channels (or vice versa), just open it, then I need to enter your PIN each time channel surfing.
This makes a "normal" use of the box almost impossible.

Improvement suggestion: You notice the pin for the duration of a session (ala session cookie) or, alternatively, for a maximum period of X hours (I would implement both).
A session is defined here as the time from an "accelerated start" to the "front-Shutdown" can either be waking up from the move / in the (deep) standby, or restart Enigma2

2. The sender restrictions have difficulty if, in addition to already existing packages cover / set. This is a double care costs, the use of bouquets is (currently not) possible.

Suggestion for improvement: The locks can be held on the transmitter level are made on Bouquet level. They will then take effect as soon as one channel of a bouquet moves to another.

3. To "Normal watching," I need at the moment) off the parental control (because of the above reasons. That means I might forget it then activate it again the next day is therefore reversed.

Improvement suggestion: See above: Session-based waiver of the parental control (one pin) input, so that then the "normal" TV is no longer einegschränkt

Along with this "improvement suggestions", I still have a few extra features that I would have liked in the parental control:

1. Distinction "Locked Mode" <-> "Free mode"
- Protect Blocked Sender / bouquets not only by PIN, but in "locked mode" completely hide, and put in all menus (timer switch, Boquet change, etc.)

2. Enlargement of the lock on recordings: recordings (and, or entire folder) can be similar to the packages are marked with a Sperrflag.
Again: In Locked mode, this will not be displayed ...

3. Enlargement of the lock on the relevant menu
Currently, only protected the Parental Control menu at the parental lock mode should also eg Plugin be prohibited installations, etc. ..
(optional): Insertion of a lock flags for plugins

4. (optional, even if it would be pretty cool): A small "User Management" for the locked mode: User / pin code to the start of a "session":
Each user of the points are 1 to 3 individually assigned.

One would then start at the box-enabled parental control, a dialog box:
1. Free mode
2. Hans-Peter
3. Cunegonde
4. Hagen

Enter to free mode, and possibly one or the other user you have a PIN, but it could also be a "default user" that does not require PIN entry, and then halt minimal permissions ...
After selecting the user will either start the service last seen (if enabled for that user), or just the first service from the first for the user shared Bouquet

And at the very end of it you could then integrate or my Kiddy timer and the daily limit, as per-user TV times ...

That would be my feature requests.

If there is one or the other fellow, I'd be willing to take the whole even in assault (for a hobby programmer, I think that alone is a too-big story).
I would implement it as a plugin, but I think a lot of things have to be directly implemented in Enigma2 to function efficiently.

[sami.sami]

TuxVision 0.0.3.0

For Streaming.

First install program TRex.
Then install program Tuxvision.

Start program Tuxvision,
go to Options and there insert DM ip and password.
Click to Destination - select destination where you want to record.
Click on Preview - to watch channel currectly playing on dreambox
Click on Record - if you want to record some feed

1.JPG

2.JPG

[sami.sami]

27.09.2009

micromon-setup-2.1.0.889

Monitoring Program for mpcs, oscam, newcs....

[sami.sami]

CS Studio ver.3.2
**************
- 3.2-
- add FTPSetTransferType
- new line generator
- add log ftp
- add custom port ssh login
- add FTP passive button ( enable/disable )


CSstudio 2.6.box3d-1.png

cs27_3.jpg

[marcel1]

TS-Doctor v1.00



.00 - Search function for next sync byte in packet editor
- Hex mode for the packet number field in packet editor
- Resync of streams with more than one problem region fixed
- Better scaling of the main form
- Direct support of teletext and subtitles
- More meaningful error message for missing PCR
- Packet filter now with stream type description
- Pure PCR streams are now shown as special stream types
- For streams whitout PMT now also teletext and subtitle stream are supported
- Some changes of the design
- Enhanced help function in the main form
- Display of the full language name
- Default settings for the removing of teletext and subtitles

[wahid]

Date: 04.10.2009
Dreambox-Growl Version 1.0.0.0
Written by Dr. Best
Windows XP / Vista / Win 7
32 / 64 bit

Installation Dreambox-Plugin growlee:
Zuerst müsst Ihr das IPK-Paket von ritzMo installieren, dann in der Config vom Plugin folgende Einstellungen vornehmen:

Send Notifications: JA
Adress: IP-Adresse-Eures-PC's

Installation Dreambox-Growl auf PC:
Das Dreambox-Growl in ein beliebiges Verzeichnis entpacken.
Das Programm wird in der Systray angezeigt, mit der rechten Maustaste kann man bei Configs noch Einstellungen vornehmen, wie das Message-Display sich verhalten soll und ob Dreambox-Growl automatisch nach dem Windows-Boot gestartet werden soll.
Bei Eurer Firewall müsst Ihr fürs interne Netz Port 9887 freischalten.
Einen herzlichen Dank an Ultravi fürs Testen von Dreambox-Growl!
Viel Spass damit, wers denn gebrauchen kann 
Dr. Best

config.jpg

dreamboxgrowl.jpg

growlee-plugin-screenshot.jpg

[wahid]

Dreambox Config Creator v0.7.0

This is a windows .NET compliant utility that will create the required config files and FTP them to your Dreambox to run NewCS and CCcam or NewCS and MGCamd.

Here's a quick run down on how to install NewCS & CCcam configs to work with Sly UK.

1. Start the program.
2. Select Sly UK from the 'Use Preset' drop down box.
3. Select your Dreambox model from the 'Model' drop down box.
4. Enter your Dreambox LAN IP address.
5. Enter your box serial number. Click Create Box Key.
6. Click Generate newcs.xml
7. Click Generate CCcam.cfg
8. In the Dreambox Login / FTP Settings area you can now click the appropriate buttons to FTP the config files to the correct locations on your Dreambox.
9. Finished, Start NewCS 1.67 and CCcam on your Dreambox.

Dreambox Config Creator Beta 7.JPG