Latest TPS Files (all formats)

[abmandar]

this tps bin work very well with Starsat SR-x95 I tested.

I can use one of the two following receivers:
Startsat SR-X4000D
Starsat SR-X200CI Plus

Do you think your file can work with one of these receivers. If yes could you plese post the software to load the bin file from pc to receiver.

Thanks for your help.

[McGyver68]

I can use one of the two following receivers:
Startsat SR-X4000D
Starsat SR-X200CI Plus

Do you think your file can work with one of these receivers. If yes could you plese post the software to load the bin file from pc to receiver.

Thanks for your help.

Hi, Here's the actually working software for an SR-X4000D (it's OK on mine): http://www.satsupreme.com/upload.php...load&id=154816 And the loader: http://www.satsupreme.com/attachment...2&d=1222291354 Regards.

[abmandar]

Hi, Here's the actually working software for an SR-X4000D (it's OK on mine): http://www.satsupreme.com/upload.php...load&id=154816 And the loader: http://www.satsupreme.com/attachment...2&d=1222291354 Regards.

Many thanks for your help.
I was not able to use it successfully.
When I connect the PC with the reciever, the connection looks fine but I recieve the following message:
<<You are running 3329B series>>
After that nothing happen.

Can I ask you to help me more?

Thank you

[abmandar]

It is ok now. Finally I was able to install it.
Many Many thanks

Can you tell me what is the validity of the bin file?

[McGyver68]

In fact, the file is actually outdated since 29/09/08, it's still working though (up to my humble analysis, using the old Via service key 08 on vplug 2.3.8 and maybe also with sw.1.3.7). This means that, if TSP doesn't change its algo, this situation will remain as is (I personally hope so ) !! Regards.

[moora]

Gentlemen,

How about Starsat SR-X200CI which BIN file works for it and what should be the SW version running on the receiver? Only polsat keys (manual entry) are working. TPS or ABSAT are not working even with manual entry of viacess keys.

Appreciate your reply.

[marioandco]

hI GUYS i'm looking for the last firmware of the stream BM 8302

Thanks a lot

[abmandar]

For my friend's reciever (Starsat SR-X400D Super): After running the ALIMUPG52_Force software I got the following message: You are running 3329C series. When I choose to download the bin file I got the message Bootloader version not compatible.
Any help
Many thanks

[McGyver68]

Hi abmandar. Take care: you're trying to put a B series software into a C series STB !! All "Super" Starsat are C series, so download this software (referenced as Ali C in the forum). Regards.

[abmandar]

Hi abmandar. Take care: you're trying to put a B series software into a C series STB !! All "Super" Starsat are C series, so download this software (referenced as Ali C in the forum). Regards.

Hi,
Thank you for the help but the link is not working. Please verify it