Probleme with my kaon sunny AT 1030 12.03.A5

[Abouselma]

I have injec the boot 2.1.9v4 on my receivers in order to flash it but after, all the channels were disapear and the signal too, to remember, all the settings are ok (LNB,...), I wish u to help me and if possible to give me the original boot

[pr2]

Hello,

If you have really a 12.03.A5 the bootloader 2.1.9v4 is the right one.
It can happens that when you flash your receiver the channel list is lost, for exemple the channel list for the streams system are not compatible with the sunny firmware:

What you need to do is go in the Kaon Menu System and select: restore to factory default setting. Your Kaon will automatically reboot and show you the initial config screen.

This will clean-up properly the memory of your Kaon and then your configure again you LNB, DiseqC,... and perform a full scan.

I also mention that in some firmware the default TP (frequency) choosed to show you the signal on a given satellite is not always the right one, so you think that you have no signal and indeed the satellite you point out doesn't send any data on the selected TP (frequency).

You can check with lyngsat the right TP (frequency) used on a given satellote, so be sure to select this one to be sure you received signal or not.

Most of the time if you perform a full scan on the satellite you will find the channels.

Also check that your satellite cable is still properly plugged in your receiver.

If you still have doubt the best think to do is try with another receiver.

Hope this help,

Pr2

[lobo13]

I have injec the boot 2.1.9v4 on my receivers in order to flash it but after, all the channels were disapear and the signal too, to remember, all the settings are ok (LNB,...), I wish u to help me and if possible to give me the original boot

Yes, the boot 2.1.9v4; loader V. 12.01.10; S/W 13.05.03, bye

[delonadel]

--------------------------------------------------------------------------------

Quote:
Originally Posted by Abouselma
I have injec the boot 2.1.9v4 on my receivers in order to flash it but after, all the channels were disapear and the signal too, to remember, all the settings are ok (LNB,...), I wish u to help me and if possible to give me the original boot


Yes, the boot 2.1.9v4; loader V. 12.01.10; S/W 13.05.03, bye

????? wat is this mi friend no commente
give your receiver the original firmware and good lock
best regard