OpenPLi 4.0 GStreamer 1.6.2 750+FREE IPTV Ch. DM800HD/DM800HDse/DM8000HD/DM500HD

[toysoft]

OpenPLi 4.0 with 750+ FREE IPTV Channels for DM800HD/DM800HDse/DM8000HD/DM500HD


- Gstreamer (v1.6.2) has been updated to master git which carries many fixes.
- No more internet connection required during bootup.
- Feeds online for online update of image and future updates/fixes if necessary.
- IPTV List and Jam Panel are now pre-shipped.
- Japhar Addon Manager 5.2 included.
- IPTV List built-in with 750+ IPTV FREE Channels.
- Many dvbmediasink fixes.
- Many stuff I forgot :P


MEGA (Japhar) :
- DM800HD : https://mega.nz/#!5R1mzQqb!MMfq5idmK...4BswWC4eVJXWRM
- DM800HDse : https://mega.nz/#!UZ0DHQTb!yq7DdwWk_...4LQ5qKwxXWPaSg
- DM500HD : https://mega.nz/#!oBUy3BaA!J04qukJz8...fmbSZdX_lrrOno
- DM8000HD : https://mega.nz/#!gBkUiQJA!zbWLvTmu0...mlupIfSR4FR4y0


TS

[toysoft]

- Gstreamer 1.6.x has been updated
- Newer gstreamer 1.6.x master git snapshot:
They've pretty much reworked HLS (m3u8) handling completely.
There should be no more jumps when switching bitrates.
- DTS Downmix should now be working on the dm800se, dm500hd and dm8000.
Also pausing the video should work now (untested).
- Fragmented streams work now (m3u8)
- Remote control delay is now set by default to 300ms
- Feeds online for online update of image and future updates/fixes if necessary.
- Improved streaming performance in both the dvbmediasink and enigma2, Dreambox fixes for the dvbmediasink:
Framerate and resolution should now be handled correctly.
- Fragmented streams should now play more smooth and give less freezes due to async changes.
- IPTV List and JAM 5.2 Panel are now pre-shipped.
- Japhar Addon Manager 5.2 included.
- IPTV List built-in with 800+ IPTV FREE Channels.






- DM800HD : https://mega.nz/#!1BFBHJiQ!Y3OBOTtf4...k3AQqweQwcW7RQ


- DM800HDse : https://mega.nz/#!BJcA2ZgJ!cUYHK6RCn...i4KULjojgP9GgI


- DM500HD : https://mega.nz/#!RZ1FiArQ!qO6MS-72Z...vLe_0oONMw48vI


- DM8000HD : https://mega.nz/#!EY13zT4Z!8z0HFTcis...g5wpBTsX_GPQ_s

[toysoft]

Available OpenPLi 4.0 MastaG GStreamer 1.7.0 !

Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

and

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.

Update online or get the new version on the web.

[toysoft]

VU : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team


Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!


Changes since previous release:


- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)


Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.


Known issues:


- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.


To find the download link, search for MastaG Japhar OpenPLi 4.0


Enjoy !

[toysoft]

Version with GStreamer 1.7.0 and more than 1000 IPTV FREE Channels built-in, Enjoy! TS

Japhar DM Sim :

- DM8000HD+ :
https://mega.nz/#!9Q8TwRYL!hsBWZhpOR...z6Qh_UGCpmnw1M
- DM800HDse+ :
https://mega.nz/#!5Ys30IQR!LcYjX3X8F...YfOAsMAGUwt5pU
- DM800HD+ :
https://mega.nz/#!8d1CgDQb!E1bd3Xcpm...S9VjTzvUcbZIU4
- DM500HD+ :
https://mega.nz/#!td8XzDBK!gUWZTa-08...zd35W7EjPYibiM

[toysoft]

Changes :
- Gstreamer 1.7.1
The mp4 playback from remote urls has been fixed upstream so no more revert for that.
libsoup http-handler has been updated so also no revert for that as well
- New libsoup handler for http urls
- New winter logo
- More free space laugh
Ive added a dirty hack that will upx compress the binary before package_write_ipk
We now have 2 to 3MB more free space (very nice, great success)
- New xvid/divx5 bitstream unpacker by mx3L, this should fix avi files with wrong fourcc
- The usual batch of dvbmediasink fixes by christophecvr and mx3L
- Wifi drivers have been refactored a bit, I dont auto-load the rt7777 anymore.
it should kick in when you plugin your wifi stick.
If not then Ill create a ppanel which will allow you to choose which driver you want to use: rt3070, rt55xx or rt7777 (since they cant be loaded at the same time)


by MastaG


DM8000HD: https://mega.nz/#!YRklVADa!jfV_0mM-6...zLFubOFmA7VCAg


DM800HDse : https://mega.nz/#!BAtCwQ4R!r15VnQlfK...nDNfLsp9CQBYbU


DM800HD : https://mega.nz/#!kYlVHRoD!pWuty-xvl...6iGabO8Dk77bno


DM500HD : https://mega.nz/#!VMcAyQwC!Z4CxifG_3...GSS8MW90MLYBkc




Feel free to post images on all your satellite forums you like and share with all your friends these excellent tools and new images with full IPTV support, the best around, even better than on original boxes !!! Thank you !

[alkapone]

I have an dm800 sim 2.01 , this software work for my dm or not , and the file is crypted it need for a pasword ....

[toysoft]

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)





Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...


DM800HD+ : https://mega.nz/#!sU13mAxI!J0Av9B6D7...v3cMRAsDyANDWY
DM500HD+ : https://mega.nz/#!NR0hHKhT!fX5cI-pgR...kxX59yZW9wVG4o
DM800HDse+ : https://mega.nz/#!MENwRaDb!AsZrkisSZ...xNqWFWFnzz0gLA
DM8000HD+ : https://mega.nz/#!cZcWyBzL!wQiPAfzzL...9Togml5GgiOM54


Clones :
VU+ Solo Ferrari V3 : https://mega.nz/#!5kp0TCJD!hugukO015...vVzSVSBWIWWL9o
VU+ Duo Ferrari V3 : https://mega.nz/#!c5J0UL4I!gMuNbdMdG...EhFESWUINgiH5g
VU+ Uno Ferrari V3 : https://mega.nz/#!MphyFTbQ!25nJ5EdyH...-VpMQ7M-p8h2VY
VU+ Solo2 Lonrisun V1 : https://mega.nz/#!coJzGAzZ!WVNyFECZF...6ChTXTRSyJ5LJo
VU+ XSolo Mini3 : https://mega.nz/#!UtJgnKjb!x6E7XadqL...1rMS-G0HBfr5iU


Originals :
VU+ Solo Original : https://mega.nz/#!1pwXCA6Y!GvbF7WaS5...2cDd6vu5ZIYR0Q
VU+ Solo2 Original : https://mega.nz/#!BhxXTDBa!sH-xMlDWg...UkPHol8HjPVlgU
VU+ SoloSE Original : https://mega.nz/#!U9RS2DyZ!UoOzFM6lj...YVBdOmb9faxg7w
VU+ Duo Original : https://mega.nz/#!Mko03Lpa!z3qOsbHlW...2B_dWj5K1ev1Xo
VU+ Duo2 Original : https://mega.nz/#!Vs5yAKZQ!VSNMOff63...k89u7E4f3fZzxM
VU+ Uno Original : https://mega.nz/#!0sgV0SAS!jfmUK8LmB...SlaOvHpd8ro06A
VU+ Ultimo Original : https://mega.nz/#!80ogBahZ!r_I-D3ktW...MKlaomSp7ZvtVQ
VU+ Zero Original : https://mega.nz/#!1gYQhLhD!V3iDuIWko...Hm6oiYBorulnNY
VU+ 4k Original : https://mega.nz/#!U5AmDKgI!d5JgIKLAs...f3P0IRPn5UW6Oc

[WallyGBR]

Hi,
What i should use for an edision os mini combo hd dvs dvb?
Thanks

Inviato dal mio Lenovo A7600 utilizzando Tapatalk

[WallyGBR]

Sorry.. I mean dvb-s2 and dvb-t2...

Inviato dal mio Lenovo A7600 utilizzando Tapatalk