hi
i have this config on my Oscam for my local cd card and Clines
the problem is with the [reader]
label = 91.xxx.xx.xxx
it will open channels on 1W but not on 13Ø
if i put it in a Cline and use CCcam it works on all
what can i do to make it work in Oscam as well?
label = ppv- works as it should
card is viasat and canal digital nordic
oscam server
[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid =
ident =
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
[reader]
label = 91.xxx.xx.xxx
protocol = cccam
enable = 1
device = 91.xxx.xx.xxx,8000
user = user
password = pass
inactivitytimeout = 30
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
cccreshare = 2
[reader]
label = ppv-xxxxx.com
protocol = cccam
enable = 1
device = ppv-xxxxx,8000
user = user
password = pass
inactivitytimeout = 30
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
cccreshare = 2
oscam config
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt
[global]
disablelog = 1
disableuserfile = 1
#logfile = /media/usb/oscam/oscam.log
# first create the needed directory's and see if there is usb stick, cf or hdd
#usrfile = /media/usb/oscam/user.log
# first create the needed directory's and see if there is usb stick ,cf or hdd
#cwlogdir = /media/usb/oscam
# first create the needed directory's and see if there is usb stick ,cf or hdd
#emmlogdir = /media/usb/
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600
[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
[webif]
httpport = 16200
httpuser = user
httppwd = password
httprefresh = 20
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
[cccam]
port = 12000
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = 0a0b0c0d0e0f1215
[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox
request_mode = 1
#[newcamd]
#key = 0102030405060708091011121314
#port = 34003@0500:FFF400,042800,042810
#keepalive = 1
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
#[radegast]
#port = 30000
#user = radegastuser
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
#[camd33]
#port = 40000
#serverip = 192.168.123.1
#key = 01020304050607080910111213141516
#[cs378x]
#port = 50000@0300:600000
#[gbox]
#hostname = host.example.com
#port = 60000
#password = mypassword
oscam user
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.user.txt
# is needed for au
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,1 7,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1
# for using mpcsmon
[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,1 7,19,19,20,21
uniq = 1
sleep = 0
monlevel = 4
#[account]
#user = user2
#pwd = pasword2
#disabled = 0
#group = 1,2,3,4,5,6,7,8,9,10,11,13,14,15,16
#uniq = 3
#sleep = 0
#monlevel = 0
#service = !service1,!service2
#services defind in oscam.services if empty all services are allowed.
#cccmaxhops = 5
#cccreshare = 2 # note the difference with { 0:0:3 } from f line cccam .
#cccignorereshare = 0
#keepalive = 1
#hostname = cccam.example.cx
# f line in cccam would be like :
# F: user pasword2 5 0 0 { 0:0:3 } { } { } cccam.example.cx
# this users c line here server line in oscam.server has group 12 to avoid loop back I did not put group 12 in his user
# account f line. Normally it's not needed... However some svn versions can have segfault errors and jumps out due to that loopback.
# By doing this you will avoid that kind of problems.That's also the reason that i asign a different group to each reader.
oscam dvbapi
#
# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
#p: 0500:023800 # prioritize 0500 with provider 023800
#P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
#P: 1722 # prioritize 1722
#P: 1830::EF75 # prioritize 1830 on channel EF75 only
#M: 1830 1830:003411 # map caid 1830 always to provider 003411
#D: 1702 200 # wait 200ms before writing cw on caid 1702
#I: :002000 # ignore provider 002000 on every channel
#I: 0 # ignore every caid that was not handled before
# These dvbapi settings works fine for CDS NL / BE, for other cards see oscam wiki on pli forum or oscam wiki on streamboard forum.
#I: 0100 #ignore all old seca providers
#I: 0500 #ignore viaccess
#I: 0622 #ignore old irdeto
M: 1817:00006A 0100:00006A #map NL nagracaid 1817:00006A to seca 0100:00006A
M: 1818:00006C 0100:00006C #map BE nagracaid 1818:00006C to seca 0100:00006C
P: 1817:00006A #Prio NL 1817
P: 1818:00006C #Prio BE 1818
oscam service
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...m.services.txt
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[service1]
caid=0500
provid=023800
#(if empty it's for all prov id's
srvid=012d
# (if empty for all services on this caid and
[service2]
caid=0100
provid=00008d
#(if empty it's for all prov id's
srvid=0ef3
# (if empty for all services on this caid and
Reply With Quote
Hey mate!